Product ID:CPW 1954
MSDS Date:07/16/1987
FSC:3439
NIIN:00N036311
MSDS Number: BQMSC

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-762-4040

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

TIN

CAS: 7440-31-5

RTECS: XP7320000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

OSHA PEL 0.1MG/M3 FUME;1 DUST

ACGIH TLV: 0.2MG/M3 FUME;1 DUST

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

DIOXIDE. OZONE AND NITROGEN OXIDES MAY BE FORMED

RTECS: 9999999ZZ

TAKE AN AIR SAMPLE INSIDE

RTECS: 9999999ZZ

KEEP HIS HEAD OUT OF FUMES, GASES

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THERMAL SPRAYING MAY CREATE ONE OR
MORE OF FOLLOWING HAZARDS. FUMES, GASES & DUSTS CAN BE DANGEROUS TO
YOUR HEALTH. ACUTE:FUMES, GASES AND DUSTS MAY RSLT IN DISCOMFORT
SUCH AS DIZZ, NAUS, OR DRYNESS O R IRRIT OF NOSE, THROAT OR EYES.
COPPER:METAL FUME FEVER CAN BE CAUSED BY FRESH COPPER OXIDE FUMES.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:TIN:EYE, SKIN & RESPIRATORY SYSTEM
IRRITATION FROM FUME. CHRONIC: OVEREXPOSURE TO FUMES, GASES & DUSTS
MAY LEAD TO SIDEROSIS (IRON DEPOSITS IN LUNGS) & MAY AFFECT PULM
FUNCTIONS. COPPER:NO AD VERSE LONG TERM EFFECTS HAVE BEEN
REPORTED. TIN:NO SIGNIFICANT LONG TERM EFFECTS. RADIATION CAN INJ
EYES AND BURN SKIN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:MOVE TO WELL VENTILATED AREA. CALL MD. EMPLOY FIRST AID
TECHNIQUES. EYE:FLUSH WITH POTABLE WATER FOR A MINIMUM OF 15
MINUTES. GET MD . SKIN:FLUSH WITH COPIOUS AMOUNTS OF WATER. CALL MD
(FP N). INGEST:CALL MD IMMEDIATELY .

Flash Point:NON-FLAMMABLE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:METAL POWDER DUST MAY PRESENT A FIRE OR
EXPLOSION HAZARD UNDER FAVORABLE CONDITIONS OF PARTICLE SIZE,
DISPERSION AND STRONG IGNITION SOURCE.

Spill Release Procedures:CLEAN-UP BY VACUUMING, WET DUSTMOP, OR WET
CLEAN-UP. AVOID DUST GENERATION. USE AN APPROVED APPROPRIATE FILTER
WITH VACUUM EQUIPMENT TO PREVENT AIRBORNE DUST LEVELS WHICH EXCEED
PEL/TLV. IF AIRBORNE D UST GENERATED, USE A NIOSH/MSHA APPRVD
RESPIRATOR.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MAINTAIN EXPOSURE BELOW THE GIVEN
PEL/TLV. ONE RECOM WAY TO DETERM COMPOSITION & QTY OF FUMES, GASES
& DUSTS TO WHICH WORKERS ARE EXPOS IS TO (ING 5)
Other Precautions:REFER TO GIVEN REFERENCES FOR ADDITIONAL INFORMATION.
READ AND UNDERSTAND MFR'S INSTRUCTIONS AND PRECAUTIONARY LABEL ON
PRODUCT.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WORKING IN CONFINED
SPACE OR WHERE LOCAL EXHAUST VENTILATION DOES NOT KEEP EXPOSURE
BELOW THE RECOMMENDED EXPOSURE LI MIT.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT WORK SITE TO KEEP FUMES,
GASES & DUSTS FROM WORKERS BRTHG ZONE & GEN AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOGG/FULL LENGTH FSHLD .
Other Protective Equipment:ARM PROT,APRONS, HATS,SHOULDER PROT,AS WELL
AS DARK SUBSTANTIAL CLTHG.PROT SCREENS/GOGG TO SHIELD OTHERS.SEE
ANSI Z49.1.
Work Hygienic Practices:USE INDUS HYGIENE MONITORING TO ENSURE THAT USE
OF PROD DOES NOT CREATE EXPOS EXCEEDING PEL/TLV.TRAIN WORKER TO
(ING 6)
Supplemental Safety and Health
HAZ DECOMP PRODS:OF NORMAL OPER INCL THOSE ORIGINATING FROM VOLAT, RXN,
OR OXIDATION OF MATLS SHOWN IN INGREDS SECTION, PLUS THOSE FROM
BASE METAL & COATING. REASONABLY EXPECTED CONSTITUENTS OF FUME W
OULD INCL COMPLEX OXIDES OF METALS LISTED IN INGREDS SECTION.
GASEOUS RXN PRODS MAY INCL CARBON MONOXIDE & CARBON(ING 4)

HCC:N1

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DURING THE SPRAYING, FUME & GAS DECOMP
PRODS ARE DIFFERENT IN PERCENT & FORM FROM INGREDS LISTED. DECOMP
PRODS (SUPDAT)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
EQUIPMENT. DISCARD ANY PRODUCT RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH LOCAL, STATE AND FED ERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.