Product ID:TIN/SILVER ALLOY: X-45 CORE
MSDS Date:05/01/1990
FSC:3439
NIIN:00-968-3370
MSDS Number: BQNRH

GARDINER SOLDER CO, DIV OF GARDINER METAL CO

4820 S CAMPBELL AVE
CHICAGO, IL 60632-1416
US

Emergency Phone: 312-847-0100

Info Phone: 800-424-9300

Cage: 56244

WHITE PLAINS ELECTRICAL SUPPLY CO

ELMSFORD, NY 10523-3319 US

Telephone: 914-592-9555

Cage: 05085

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 94-96%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9293

SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 3.5-6%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ROSIN ACID

CAS: 8050-09-7

Fraction By Weight: 0.5-3%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALAATION OF DUCT MAY CAUSE
IRRITATION. PROLONGED EXPOSURE CAN CAUSE PERMANENT RESPIRATORY
DAMAGE. HEALTH STUDIES HAVE SHOWN THAT POTENTIAL HEALTH RISKS MAY
VARY BY INDIVIDUAL. ALWAYS MINIMIZE EXPO SURE AS A PRECAUTION.
Explanation of Carcinogenicity:FORMALDEHYDE IS LISTED AS A PROBABLE
CARCINOGEN BY NTP,IARC, EPA,& IT IS REGULATED BY OSHA.
Effects of Overexposure:METALLIC TASTE IN MOUTH. IRRITATION OF THE
RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:RESSPIRATORY & LUNG CONDITIONS.

First Aid:SKIN:FLUSH WITH WATER IMMEDIATELY. TREAT FOR BURNS, SEEK
MEDICAL ATTENTION. EYE IRRITATION:FLUSH WITH WATER FOR 15 MINUTES.
SEEK MEDICAL ATTENTION. INHALATION:REMOVE TO FRESH AIR. SUPPORT
RESPIRATION. GET MEDICAL HELP. INGESTION:DRINK LARGE AMOUNTS OF
WATER AND SEEK MEDICAL ATTENTION.

Extinguishing Media:DRY CHEMICAL. DO NOT USE WATER.
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS ABOVE
1400C (2552F).
Unusual Fire/Explosion Hazard:IF GENERATED, DUSST IS EXPLOSIVE ABOVE
100 F. INCOMPLETE THERMAL DEGRADATION OF RESINS ARE KNOWN TO GIVE
OFF SMELL OF FORMALDEHYDE.

Spill Release Procedures:COLLECT AND USE. IF CONTAMINATED OR IN SMALL
PARTICLES, VACUUM OR COLLECT THE MATERIAL. NEVER USE METHODS THAT
GENERATE DUST.
Neutralizing Agent:NONE

Handling and Storage Precautions:NO INFORMATION GIVEN ON MSDS BY MFR.
Other Precautions:AVOID CONTACT WITH FUMES OR DUST.

Respiratory Protection:ABOVE TLV, NIOSH APPPROVED RESPIRATORS - SEE
29CFR1910.134.
Ventilation:LOCAL EXHAUST IS PREFERRED, MECANICAL IS OK.
Protective Gloves:HEAT RESISTANT DURING SOLDERING
Eye Protection:GOGGLES OR FACE SHIELD DURING SOLDERING
Other Protective Equipment:AS REQUIRED TO AVOID CONTACT.
Work Hygienic Practices:WASH AFTER USE. FOLLOW GOOD INDUSTRIAL HYGIENE
PRACTICES.
Supplemental Safety and Health
KEY2:KT

HCC:N1
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:2210F,1210C
Melt/Freeze Pt:M.P/F.P Text:453F,234C
Vapor Pres:1 AT 1626F
Spec Gravity:7.46
Evaporation Rate & Reference:NAP
Solubility in Water:NIL
Appearance and Odor:GREY SOLID, ODORLESS

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS. STRONG ACIDS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:TOXIC METAL FUMES ABOVE 1375C (2507F).
Conditions to Avoid Polymerization:WILL NOT OCCUR

Waste Disposal Methods:NEVER DISPOSE OF IN TRASH. HOLD FOR RECYCLING OR
DISPOSE OF I/A/W FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.