Product ID:DECRAPRIME UNDERCOAT WHITE 042-0000
MSDS Date:08/19/1989
FSC:8010
NIIN:00N012416
MSDS Number: BQPHF

DECRATREND PAINT CORP

251 MASON WAY
CITY OF INDUSTRY, CA 91746
US

Emergency Phone: 818-333-4592

Info Phone: 818-333-4592

Cage: 42590

DECRATREND PAINT CORP

CITY OF INDUSTRY, CA 91746 US

Telephone: 818-333-4592

Cage: 42590

MAGNESIUM SILICATE HYDRATE

CAS: 1343-90-4

RTECS: OM4360000

Fraction By Weight: 10%

OSHA PEL N/K

ACGIH TLV: N/K

2.0 MMHG.

CAS: 64742-88-7

Fraction By Weight: 20%

OSHA PEL N/K

ACGIH TLV: N/K

3.0 MMHG.

CAS: 64742-95-6

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K

2.90 LB/GL (348 G/L).

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED/REPEATED EXPOSURES >TLV MAY
RESULT IN PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE.PRLNGD/RPTD SKIN
CONTACT CAN CAUSE DERMATITIS.ASPIRATION INTO LUNGS CAN CAUSE CHEM
PNEUMONITIS WHICH CAN BE FATA L.INHALING EXCESS VAPORS CAN CAUSE
ASPHYX. CHRONIC OVEREXPOSURE TO TITANIUM DIOXIDE DUST MAY CAUSE
SLIGHT LUNG FIBROSIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:CAN CAUSE SEVERE IRRIT,REDNESS,TEARING,
AND BLURRED VISION.SKIN:PRLNG/RPTD CONTACT CAN CAUSE MODERATE
IRRIT, DEFATTING.ORGANIC SOLVENTS EASILY ABSORBED CAUSING
DRYING,REDNESS.INGEST: CAN CAUSE GI
IRRIT,NAUSEA,VOMITING,DIARRHEA.INHAL:CAN CAUSE NASAL & RESP
IRRIT,WEAKNESS,DIZZINESS,FATIGUE,NAUSEA,HEADACHE & POSS UNC
Medical Cond Aggravated by Exposure:NONE KNOWN

First Aid:EYES:FLUSH IMMED W/ LARGE AMOUNTS OF WATER FOR AT LEAST 15
MIN.TAKE TO AN MD FOR MEDICAL TREATMENT.SKIN:WASH AFFECTED AREAS W/
SOAP & WATER.REMOVE CONAMINATED CLTHG.CONSULT AN MD IF IRRIT
PERSISTS.ING EST:DRINK 1 OR 2 GLASSES OF WATER TO DILUTE.DO NOT
INDUCE VOMITING.CONSULT AN MD/POIS CTL CTR IMMED.TREAT
SYMPTOMATICALLY.INHAL: REMOVE TO FRESH AIR.RESTORE BREATHING.TREAT
SYMPTOMATICALLY.CONSULT MD.

Flash Point Method:TCC
Flash Point:109F,43C
Lower Limits:1.0% BY VOL
Upper Limits:7.0% BY VOL
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SELF-CONTAINED
BREATHING APPARATUS WITH FULL FACE PIECE OPERATED IN PRESSURE
DEMAND OR OTHER POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:VAPS HEAVIER THAN AIR MAY TRAVEL ON
GROUND & BE IGNITED BY HEAT,FLAME,ETC.CLSD CNTNRS MAY EXPLODE IN
EXTREME HEAT.HAZ DECOMP PROD:CO,CO2,VARIOUS HYDROCARBONS.

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES.DIKE,CONTAIN,
OR ABSORB WITH INERT MATERIALS (SAND,VERMICULITE,ETC.).TRANSFER TO
CONTAINERS FOR RECOVERY OR DISPOSAL.PREVENT RUNOFF INTO
SEWERS,STREAMS,OR OTHER BODIES O F WATER.
Neutralizing Agent:N/K

Handling and Storage Precautions:DO NOT STORE OR USE NEAR SOURCES OF
HIGH TEMPS,NEAR SPARKS,FIRE,OPEN FLAME,ELECTRICAL EQUIP,OR OTHER
IGNITION SOURCES.KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:DO NOT TAKE INTERNALLY.AVOID PROLONGED OR REPEATED
EXPOSURE TO LEVELS ABOVE TLV.

Respiratory Protection:IF TLV IS EXCEEDED USE NIOSH/MSHA APPROVED
ORGANIC VAPOR AND MIST,SUPPLIED AIR OR SELF-CONTAINED BREATHING
APPARATUS.
Ventilation:USE ADEQUATE MECHANICAL (GENERAL AND/OR LOCAL) VENTILATION
TO MAINTAIN EXPOSURES BELOW TLV.
Protective Gloves:RESISTANT GLOVES SUCH AS NITRILE RUBBER.
Eye Protection:CHEM WORKER GOGGLES OR (SEE SUPP)
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING.PROVIDE EYEWASH
STATIONS.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING
RESTROOMS.WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
BOILING POINT:310-316F,154.44-157.78C.EYE PROTECTION:OTHER OSHA
PERMITTED SAFETY GLASSES.ROUTES OF ENTRY:INHALATION/ SKIN/INGESTION
.

HCC:F4
Boiling Pt:B.P. Text:SEE SUPP
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:>1,AIR=1
Spec Gravity:1.5,WATER=1
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NONE
Appearance and Odor:TYPICAL FOR SOLVENT BASED COATING.

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT EXPOSE TO HIGH TEMPERATURES OR OPEN
IGNITION SOURCES.
Hazardous Decomposition Products:MAY FORM MATERIALS,CARBON
DIOXIDE,CARBON MONOXIDE,VARIOUS HYDROCARBONS,ETC. ON THERMAL
DECOMPOSITION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.