Product ID:ACRYLIC RESURFACER, 4200
MSDS Date:07/08/1986
FSC:8010
NIIN:00N035764
MSDS Number: BQPPP

Emergency Phone: 617-887-5926;800-424-9300(CHEMTREC)

Info Phone: 617-547-5300

Cage: 08750

Telephone: 617-547-5300 EXT 208

Cage: 08750

BENTONITE CLAYS (PEL/TLV AS NUISANCE DUST)

OSHA PEL 5MG/M3RDUST;15 TDUST

ACGIH TLV: 10 MG/M3 TDUST

NON HAZARDOUS INGREDIENTS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC:INHAL:VAPORS OR SPRAY
MISTS MAY BE SLIGHTLY IRRITATING TO EYE, NOSE, THROAT & MUCOUS
MEMBRANES OF RESPIRATORY TRACT PRODUCING SYMPTOMS OF HEADACHE,
NAUSEA IN POORLY VENTILATED AREAS. SKI N:PROLONGED OR REPEATED
CONTACT W/COATING MAY CAUSE SLIGHT IRRITATION. EYE:DIRECT
CONTACT:INCONSEQUENTIAL IRRIT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) . EYE:IMMEDIATELY FLUSH W/PLENTY OF WATER FOR AT LEAST 15
MINUTES & CONSULT MD. SKIN:WASH THOROUGHLY W/SOAP & WATER; IF
DRENCHED , REMOVE & WASH CLOTHING BEFORE REUSE. INGEST:IF VICTIM IS
CONSCIOUS, GIVE 2 GLASSES OF WATER. CALL MD.

Flash Point:NON-COMBUSTIBLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:KEEP UNNECESSARY PEOPLE AWAY. DIKE & CONTAIN
SPILL W/INERT MATERIAL (SAND, EARTH, ETC) & TRANSFER LIQ TO CNTNRS
FOR RECOVERY/DISP. KEEP SPILL OUT OF SEWERS & OPEN BODIES OF WATER.
FLOORS MAY BE SLIPPE RY, CARE SHLD BE EXERCISED TO AVOID FALLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MAX STOR TEMP 140F, MIN 34F. KEEP
CLOSURE TIGHT & CNTNR UPRIGHT TO PREVENT LEAKAGE. "KEEP FROM
FREEZING".
Other Precautions:DO NOT GET IN EYES. AVOID SKIN CONTACT. PREVENT
PRLNG/RPTD BRTHG OF VAP/SPRAY MISTS. DO NOT HANDLE UNTIL MFR'S
SAFETY PRECS & LABEL INSTRUCTIONS HAVE BEEN READ & UNDERSTOOD.
AVOID BRTHG SANDING DUST.

Respiratory Protection:USE NIOSH/MSHA APPRVD CHEM/MECH FILTERS DESIGNED
TO REMOVE PARTICULATES IN OPEN & RESTRICTED VENT AREAS. USE
NIOSH/MSHA APPRVD AIRLINE TYPE RESPS/HOODS IN CONFINED AREAS. EXPOS
TO SPRAY MISTS/SANDING DUSTS SHLD BE CONTROLLED TO (SUPDAT)
Ventilation:SUFFICIENT VENT, IN PATTERN & VOL, SHOULD BE PROVIDED TO
KEEP AIR CONTAM CONC BELOW APPLIC EXPOS LIMITS. ALL (SUPDAT)
Protective Gloves:NEOPRENE OR RUBBER GLOVES.
Eye Protection:CHEM WORK GOGG W/FULL LGTH FCSHLD
Other Protective Equipment:USE DISPOSABLE OR IMPERVIOUS CLTHG IF WORK
CLTHG CONTAM IS LIKELY. USE PROT CREAM IF SKIN CONTACT IS LIKELY.
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING/USING WASH
ROOM. FOOD/BEVERAGES SHLD NOT BE CONSUMED ANYWHERE PROD IS
HNDLD/STORED.
Supplemental Safety and Health
BOILING POINT: 212F,100C (WATER). MELTING POINT: >32F,0C (ICE). RESP
PROT:BELOW 10 MG/M3 THROUGH USAGE OF NIOSH/MSHA APPROVED DUST
FILTER RESPIRATORS. VENT:APPLICATION AREAS SHOULD BE VENTILATED
I/A/W OSHA REG 29 CFR PART 1910.94.

Boiling Pt:B.P. Text:SUPP DATA
Melt/Freeze Pt:M.P/F.P Text:SUPP DATA
Vapor Pres:760 @ 100C
Vapor Density:HVR/AIR
Spec Gravity:8.8 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Solubility in Water:COMPLETE
Appearance and Odor:VISCOUS LIQUID; SLIGHT AMMONIACAL ODOR.

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS (E.G., NITRIC ACID,
PERMANGANATES), ETC.
Stability Condition to Avoid:KEEP FROM FREEZING.
Hazardous Decomposition Products:SOME CARBON MONOXIDE.

Waste Disposal Methods:COATING & ANY CONTAM DIKING MATL SHLD BE ALLOWED
TO THORO AIR DRY & COLLECTED INTO SEALED DRUMS & PROPERLY LABELED
W/WASTE DESIGNATION & DISPOSED OF I/A/W CURRENT LOC, STATE & FED
REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.