Product ID:PRO LINE PVA SEMI-GLOSS LATEX ENAMEL, (SUPP
MSDS Date:01/23/1987
FSC:8010
NIIN:00N037178
MSDS Number: BQQCH

MARTIN-SENOUR CO

CLEVELAND, OH 44101
US

Emergency Phone: 216-566-2917

Info Phone: 216-566-2902

Cage: 16772

MARTIN-SENOUR CO THE DIV SHERWIN-WILLIAMS CO

CHICAGO, IL 60608-5724 US

Cage: 16772

STYRENE-ACRYLIC COPOLYMER

Fraction By Weight: <5%

0.1

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: <5%

OSHA PEL 50 PPM,C

ACGIH TLV: 50 PPM,C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TITANIUM OXIDE;(TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

LATEX (VINYL)

Fraction By Weight: 20%

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 55 - 60%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:IRRITANT TO SKIN, EYES, AND
UPPER RESPIRATORY SYSTEM. IN A CONFINED AREA VAPORS IN HIGH
CONCENTRATION MAY CAUSE HEADACHE, NAUSEA, OR DIZZINESS.
CHRONIC:PROLONGED OVEREXPOSURE TO INGREDIENTS MAY CAUSE ADVERSE
EFFECTS TO THE REPRODUCTIVE SYSTEMS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:MOVE FROM EXPOSURE. RESTORE BREATHING. KEEP WARM &
QUIET. SKIN:WASH AFFECTED AREA THOROUGHLY WITH SOAP & WATER. REMOVE
CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE. EYE:FLUSH WITH
LARGE AMOUNT S OF WATER FOR AT LEAST 15 MINUTES. GETMD. INGEST:CALL
MD IMMEDIATELY .

Flash Point Method:PMCC
Flash Point:>199F,>93C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER SPRAY MAY BE INEFTIVE. IF WATER IS
USED, FOG NOZZ ARE PREF. WATER MAY BE (SUPP DATA)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE (DUE TO THE
BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AND
REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:USE ONLY WITH ADEQUATE VENTILATION.
AVOID BREATHING VAPORS AND SPRAY MIST. AVOID CONTACT WITH SKIN AND
EYES.
Other Precautions:PROTECT AGAINST DUST WHICH MAY BE GENERATED BY
SANDING OR ABRADING DRIED FILM. KEEP CONTAINER CLOSED WHEN NOT IN
USE. TRANSFER ONLY TO APPROVED CONTAINERS W/COMPLETE AND APPROP
LABELING. DO NOT TAKE I NTERNALLY.KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:IF PERSONAL EXPOSURE CANNOT BE CONTROLLED BELOW
APPLICABLE LIMITS BY VENTILATION, WEAR NIOSH/MSHA APPROVED
RESPRIATORY DEVICE FOR PROTECTION.
Ventilation:LOC EXHST PREF. GEN EXHST ACCEPTABLE IF EXPOS TO MATLS IN
INGREDS SECTION MAINTAINED BELOW APPLIC EXPOS LIMITS. (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS AFTER USING.
Supplemental Safety and Health
MFR PT#/TRADE NAME:WHITE, WHITE, 728-6511. FIRE FIGHT PROC:USED TO COOL
CLOSED CONTAINERS TO PREVENT PRESSURE BUILDUP AND POSSIBLE
AUTOIGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT. VENT:REFER
TO OSHA STANDARDS 1910.104, 1910.107, 1910.108.

HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:66.8

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:BY FIRE:CARBON DIOXIDE, CARBON
MONOXIDE.

Waste Disposal Methods:WASTE FROM PRODUCT IS NOT HAZARDOUS AS DEFINED
UNDER RCRA 40 CFR 261. INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINER. DISPOSE OF IN ACCORDANCE WITH LOCAL,
STATE AND FEDERAL REGULA TIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.