BQTMB - ALUMINUM BRAZING SALT E-960

  • MSDS: BQTMB
  • Manufacturer: PARK METALLURGICAL CORP
  • Product Name: ALUMINUM BRAZING SALT E-960
  • National Stock Number: 3439-00N036878
Product Identification

Product ID:ALUMINUM BRAZING SALT E-960
MSDS Date:04/29/1992
FSC:3439
NIIN:00N036878
MSDS Number: BQTMB

Responsible Party
PARK METALLURGICAL CORP
8074 MILITARY AVE
DETROIT, MI 48204
US

Emergency Phone: 313-895-7215

Info Phone: 313-895-7215

Cage: PARKM

Contractor
PARK METALLURGICAL CORP
AVENUE DETROIT, MI 48204 US

Telephone: 313-895-7215

Cage: PARKM

Ingredients

SODIUM FLUORIDE (SARA III)

CAS: 7681-49-4

RTECS: WB0350000

Fraction By Weight: <10%

OSHA PEL 2.5 MG/M3

ACGIH TLV: 2.5 MG/M3

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: CONTACT MAY CAUSE FORMATION OF
LARGE, OPEN, BOIL-LIKE SORES ESPECIALLY IN THE PRESENCE OF
MOISTURE. INHAL: MAY PRODUCE CHRONIC POISONING. EYES: MODERATELY
IRRITATING.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN/EYES:FLUSH W/LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINS. OBTAIN MEDICAL ATTENTION. INHAL:REMOVE PERSON FROM
CONTAMINATED AREA. IF SYMPTOMS OF RESPIRATORY DISCOMFORT PERSISTS,
OBTAIN MEDICAL ATTE NTION IMMEDIATELY. INGEST:CALL MD IMMEDIATELY .

Fire Fighting

Extinguishing Media:WATER, DRY CHEMICAL & CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:SWEEP UP & RETURN TO DRUM FOR REUSE IF SALT
HAS NOT BECOME WET.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN CLOSED CONTAINER TO AVOID
MOISTURE PICK UP.
Other Precautions:DO NOT ADD WET SALT TO MOLTEN SALT BATH.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED DUST MASK IS RECOMMENDED FOR
HANDLING DRY PRODUCT OR IF FUMES BECOME EXCESSIVE.
Ventilation:MECHANICAL VENTILATION IS RECOMMENDED TO COMPLY W/TLV
STATED IN INGREDIENT SECTION.
Protective Gloves:THERMAL PROTECTION RECOMMENDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYE WASH AND DELUGE SHOWER . NONE
SPECIFIED BY MANUFACTURER.THERMAL PROTECTION RECOMMENDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:T4
Spec Gravity:>1
Solubility in Water:APPRECIABLE
Appearance and Odor:POWDER.

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:HF.

Disposal

Waste Disposal Methods:THIS MATERIAL IS CLASSIFIED AS A NON-HAZARDOUS
WASTE UNDER THE RESOURCE CONSERVATION & RECOVERY ACT. DISPOSE OF IN
ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.