Product ID:V 34025 CLEAR GELCOAT
MSDS Date:05/08/1986
FSC:8010
NIIN:00N037004
MSDS Number: BQTQK

FERRO CORP

115 SKYLINE DR
SOUTH PLAINFIELD, NJ 07080
US

Emergency Phone: 216-641-8580

Info Phone: 201-641-8580

Cage: FERRC

FERRO CORP.

SOUTH PLAINFIELD, NJ 07080 US

Telephone: 908-756-1225

Cage: 7L111

STYRENE (SARA III).

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 40%

OSHA PEL 100 PPM

ACGIH TLV: S,50PPM/100STEL;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHACRYLIC ACID, METHYL ESTER;(METHYL METHACRYLATE) (SARA

CAS: 80-62-6

RTECS: OZ5075000

Fraction By Weight: <50%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:STYRENE AT >400 PPM IS IRRITATING TO
ALL PARTS OF THE RESPIRATORY TRACT AND EYES. MAY BE FATAL AT 1000
PPM. SOMEWHAT ANESTHETIC. STYRENE VAPOR GENERATION OF GEL COATS
WILL RARELY EXCEED 200 PPM.
Explanation of Carcinogenicity:STYRENE:POSSIBLY CARC TO HUM (GROUP 2B,
IARC MONOGRAPH SUPPLEMENT 7, PAGE 115, 1987).
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:RESPIRATORY AGGRAVATION AND
DERMATITIS MAY OCCUR.

First Aid:INHAL:MOVE TO WELL VENTILATED AREA. MAKE COMFORTABLY WARM BUT
NOT HOT. USE OXYGEN OR ARTIFICIAL RESPIRATION AS REQUIRED.
EYE:FLUSH IMMEDIATELY WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES AND GET MD. INGEST:CALL MD IMMEDIATELY SKIN:FLUSH WITH
COPIOUS AMOUNTS OF WATER. CALL MD .

Flash Point Method:CC
Flash Point:80.0F,26.7C
Lower Limits:1%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG, OTHER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . USE CARBON DIOXIDE OR FOAM.
Unusual Fire/Explosion Hazard:HIGHLY FLAMMABLE; CAN POLYMERIZE WHEN
HEATED; SEALED CONTAINER CAN RUPTURE EXPLOSIVELY WHEN HEATED.

Spill Release Procedures:REMOVE SATURATED CLOTHING IMMEDIATELY AND WASH
AFFECTED AREAS WITH SOAP & WATER. REMOVE ALL SOURCES OF IGNITION.
VENTILATE AREA. USE PROTECTIVE MEASURES AS DESCRIBED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY FROM SUNLIGHT-OPEN
FLAMES-CONTAMINATION AND PROLONGED STORAGE ABOVE 100F.
Other Precautions:AVOID IMPROPER ADDITION OF PROMOTER &/OR CATALYST.
CONSULT PROD BULLETIN. A PROMOTER (METAL ORG SUCH AS COBALT OR
ALKALINE TYPE) & CATALYST (ORGANIC PEROXIDE TYPE) USED W/PROD
SHOULD ALWAYS BE MIXED S EPARATELY W/PROD & SHOULD NEVER (SUPDAT)

Respiratory Protection:UP TO 100 PPM:NONE. 100 PPM AND ABOVE:NIOSH/MSHA
APPROVED AIR LINE MASK OR SCBA.
Ventilation:LOCAL AND MECHANICAL EXHAUST. USE EXPLOSION PROOF MOTORS.
Protective Gloves:NEOPRENE OR NON-SOLUBLE PLASTIC.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY SHOWERS AND EYE WASH STATIONS.
Work Hygienic Practices:STANDARD GOOD HOUSEKEEPING AND HEALTH
PRACTICES.
Supplemental Safety and Health
OTHER PREC:BE MIXED DIRECTLY TOGETHER.

HCC:F4
Boiling Pt:B.P. Text:290F,143C
Vapor Pres:SEE ING 2
Vapor Density:HVR/AIR
Spec Gravity:1.04
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:0.04

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, PEROXIDES & OTHER OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE AND DIOXIDE, LOW
MOLECULAR WEIGHT HYDROCARBONS AND ORGANIC ACID.
Conditions to Avoid Polymerization:SUNLIGHT, OPEN FLAMES, CONTAMINATION
AND PROLONGED STORAGE ABOVE 100F.

Waste Disposal Methods:ABSORB WITH INERT MATERIALS SUCH AS VERMICULITE
OR SAND & PLACE IN CLOSED CONTAINER FOR DISPOSAL AS A SOLID WASTE.
WASH AREA WELL WITH TRISODIUM PHOSPHATE AND WATER. DISPOSAL MUST
CONFORM TO LOCAL, ST ATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.