BQTVY - DUBL-CHEK PENETRANT, HM3A

  • MSDS: BQTVY
  • Manufacturer: SHERWIN INC
  • Product Name: DUBL-CHEK PENETRANT, HM3A
  • National Stock Number: 6850-00N037386
Product Identification

Product ID:DUBL-CHEK PENETRANT, HM3A
MSDS Date:08/05/1987
FSC:6850
NIIN:00N037386
MSDS Number: BQTVY

Responsible Party
SHERWIN INC
5530 BORWICK AVE
SOUTH GATE, CA 90280
US

Emergency Phone: 213-861-6324;800-424-9300(CHEMTREC)

Info Phone: 213-861-6324

Cage: 21405

Contractor
SHERWIN INC.
SOUTH GATE, CA 90280-7402 US

Telephone: 562-861-6324/FAX 923-8370

Cage: 21405

Ingredients

POLYETHYLENE GLYCOL ETHER;(SECONDARY ETHOXLYATED FATTY

CAS: 68131-40-8


HYDROTREATED MIDDLE PETROLEUM DISTILLATE

CAS: 64742-46-7

RTECS: JN9379645

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOT KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:EYE:SEVERE IRRITATION. SKIN:IRRITATION.
INHAL:LIGHT HEADEDNESS.
Medical Cond Aggravated by Exposure:UNKNOWN.

First Aid

First Aid:EYE:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. GET MD.
SKIN:WASH, REMOVE CONTAMINATED CLOTHING. INHAL:FRESH AIR. INGEST:DO
NOT INDUCE VOMITING. GET MD.

Fire Fighting

Flash Point Method:PMCC
Flash Point:200F,93C
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIP . DO NOT USE A DIRECT STREAM OF WATER, IT SPREADS
FIRE. PROD MAY FLOAT & REIGNITE ON SURF OF WATER.
Unusual Fire/Explosion Hazard:ON BURNING, THIS PRODUCT CAN RELEASE
TOXIC FUMES AND VAPORS.

Accidental Release

Spill Release Procedures:EXTINGUISH ALL FLAMES. MAKE DIKE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:HANDLING:DO NOT SPLASH OR CREATE MISTS
OR VAPORS. STORAGE:STORE AWAY FROM HIGH TEMPERATURES AND OPEN
FLAMES. KEEP CONTAINERS CLOSED.
Other Precautions:EMPTIED CONTAINER RETAINS VAPOR AND PRODUCT RESIDUES.
DO NOT CUT OR WELD ON OR NEAR THIS CONTAINER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR IF VAPORS OR
MISTS ARE GENERATED.
Ventilation:LOCAL EXHAUST IS ADVISABLE. MECHANIAL (GENERAL) EXHAUST IS
USUALLY NOT NECESSARY.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH BEFORE EATING. DO NOT SMOKE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:440F,227C
Spec Gravity:0.90 (H*2O=1)
Solubility in Water:EMULSIFIABLE
Appearance and Odor:YELLOW, GREEN LIQUID. PETROLEUM ODOR

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:OPEN FLAMES AND HAZARDS NORMALLY
INCOMPATIBLE WITH PETROLEUM OILS.
Hazardous Decomposition Products:CARBON MONOXIDE AND OTHER UNIDENTIFIED
ORGANIC COMPOUNDS MAY BE FORMED UPON COMBUSTION.

Disposal

Waste Disposal Methods:TAKE UP WITH AN ABSORBENT MATERIAL AND DISPOSE
OF IN COMPLIANCE WITH ALL LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.