Product ID:TIGTECTIC 1851
MSDS Date:05/01/1986
FSC:3439
NIIN:00N037579
MSDS Number: BQTYL

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

CLEANSING & DEGREASING ACTIVITIES). WHEN ELECTRODE

RTECS: 9999999ZZ

IN PERCENT & FORM FROM INGS LISTED.DECOMP PRODS OF

RTECS: 9999999ZZ

RXN/OXIDATION OF MATLS SHOWN IN ING SEC,PLUS THOSE

RTECS: 9999999ZZ

FLUORIDES,

RTECS: 9999999ZZ

NICKEL, MOLYBDENUM, COPPER,& OTHER METALS LISTED IN

RTECS: 9999999ZZ

AND CARBON DIOXIDE. OZONE AND NITROGEN OXIDES MAY

RTECS: 9999999ZZ

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

OSHA PEL 0.1MG/M3 FUME;1 DUST

ACGIH TLV: 0.2MG/M3 FUME;1 DUST

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15 MG/M3 DUST;5 FUME

ACGIH TLV: 10 MG/M3 DUST;5 FUME

NEC, TO SHIELD OTHERS.AS RULE, START W/SHADE THAT

RTECS: 9999999ZZ

SHADE WHICH GIVES SUFFICIENT VIEW OF WELD ZONE.

RTECS: 9999999ZZ

WELDED, PROCESS, PROD,& ELECTRODES

RTECS: 9999999ZZ

FUMES & GASES TO WHICH WORKERS MAY BE EXPOS INCL

RTECS: 9999999ZZ

GALVANIZING), NUMBER OF WELDERS & VOL OF WORK AREA,

RTECS: 9999999ZZ

TO FUME PLUME, AS WELL AS PRESENCE OF CONTAM IN

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: OVEREXPOSURE TO WELDING FUMES
MAY RESULT IN DISCOMFORT SUCH AS DIZZINESS, NAUSEA, OR DRYNESS OR
IRRITATION OF NOSE, THROAT OR EYES. COPPER: METAL FUMES FEVER CAN
BE CAUSED BY FRESH COPPER OXIDE FUME. CHRONIC: MAY LEAD TO
SIDEROSIS (IRON DEPOSITS IN LUNGS) AND MAY AFFECT PULMONARY
FUNCTIONS. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: COPPER: NO ADVERSE LONG TERM EFFFECTS
DUE TO COPPER AND COPPER OXIDE HAVE BEEN REPORTED IN LITERATURE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:REMOVE TO WELL VENTILATED AREA. CALL FOR MEDICAL AID. EMPLOY
FIRST-AID TECHNIQUES RECOMMENDED BY AMERICAN RED CROSS. INHALATION:
REMOVE FROM EXPOSURE. SUPPORT BREATHING (GIVE ARTIFICIAL
RESPIRATION/OX YGEN) . INGESTION: CALL MD IMMEDIATELY . SKIN: FLUSH
WITH COPIOUS AMOUNTS OF WATER . EYE: FLUSH WITH WATER FOR AT LEAST
15 MINUTES .

Flash Point:NONFLAMMABLE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS
.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC AND SPARKS AND BRAZING FLAMES
CAN IGNITE COMBUSTIBLES AND FLAMMABLES. REFER TO ANSI Z49.1 FOR
FIRE PREVENTION DURING USE OF WELDING AND ALLIED PROC.

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATORY OR AIR SUPPLIED RESPIRATOR WHEN WORKING IN CONFINED
SPACE OR WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE
BELOW RECOMMENDED EXPOSURE LI MIT.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT ARC/BOTH, TO KEEP FUMES
& GASES FROM WORKER'S BRTHG ZONE & GEN AREA. TRAIN (SUPDAT)
Protective Gloves:WELDER'S GLOVES.
Eye Protection:CHEM WORK GOG W/FULL LGTH FACESHLD(SUPDA
Other Protective Equipment:WEAR HEAD & BODY PROT WHICH HELP TO PVNT INJ
FROM RADIA, SPARKS & ELEC SHOCK. SEE ANSI Z49.1. AT MIN, THIS INCL
(SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VENT:WORKER TO KEEP HIS HEAD OUT OF FUMES. OTHER PROT EQUIP:ARM PROT,
APRONS, HATS, SHOULDER PROT, AS WELL AS DARK SUBSTANTIAL
CLTHG.TRAIN WORKER NOT TO TOUCH LIVE ELEC PARTS & TO INSULATE
HIMSELF FRO M WORK & GROUND.EYE PROT: .WEAR HELMET/USE FACE SHIELD
W/FILTER LENS. PROVIDE PROT SCREENS & FLASH GOG, IF (ING 3)

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY OF BOTH ARE DEPENDENT UPON
METAL BEING (ING 5)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE, A ND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.