Product ID:TIGTECTIC 21
MSDS Date:05/01/1986
FSC:3439
NIIN:00N037584
MSDS Number: BQVVK

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15MG/M3 TDUST;5 FUME

ACGIH TLV: 10MG/M3 DUST;5 FUME

SILICON

CAS: 7440-21-3

RTECS: VW0400000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

AREA. TRAIN THE WORKER TO KEEP HIS HEAD OUT OF THE

RTECS: 9999999ZZ

WORKER NOT TO TOUCH LIVE ELECTRICAL PARTS

RTECS: 9999999ZZ

PROTECTIVE SCREENS & FLASH GOGGLES IF NECESSARY, TO

RTECS: 9999999ZZ

TOO DARK TO SEE THE WELD ZONE. THEN GO TO THE NEXT

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: OVEREXP TO WELDING FUMES MAY
RSLT IN DISCOMFORT SUCH AS DIZZINESS, NAUS, OR DRYNESS OR IRRIT OF
NOSE, THROAT/EYES. SILICON, SILICON OXIDE: POSSIBLE EYE IRRIT.
REMOVE BY IRRIGATING EYES W/COPIOU S AMOUNTS OF WATER. CHRONIC:
LONGTERM OVEREXP MAY LEAD TO SIDEROSIS (IRON DEPOSITS IN LUNGS) AND
MAY(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: AFFECT PULMONARY FUNCTIONS. SILICON,
SILICON OXIDE: OVEREXP TO AMORPHOUS SILICA CAN CAUSE
PNEUMOCONIOSIS. ARC RAYS CAN INJURE EYES & BURN SKIN. ELECTRIC
SHOCK CAN KILL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL: REMOVE TO WELL-VENTILATED AREA. CALL FOR MEDICAL AID.
EMPLOY FIRST-AID TECHNIQUES RECOMMENDED BY THE AMERICAN RED CROSS.
EYES: IMMED FLUSH WITH POTABLE WATER FOR A MINIMUM OF 15 MIN. SEEK
ASSIS TANCE FROM MD . SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER.
CALL MD . INGEST: CALL MD IMMED .

Extinguishing Media:EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHS APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONFLAMM. WELDING ARC & SPARKS & BRAZING
FLAMES CAN IGNITE COMBUST AND FLAMM. REFER TO ANSI Z49.1 FOR FIRE
PREVENTION DURING THE USE OF WELDING & ALLIED PROC.

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:READ AND UNDERSTAND MANUFACTURER'S
INSTRUCTIONS & PRECAUTIONARY LABEL ON PRODUCT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE, FUME RESP OR
AIR SUPPLIED RESPIRATOR WHEN WORKING IN CONFINED SPACE OR WHERE
LOCAL EXHAUST OR VENT DOES NOT KEEP EXPOSURE BELOW THE RECOMMENDED
EXPOSURE LIMIT.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST @ ARC, OR BOTH, TO KEEP THE
FUMES & GASES FROM THE WORKER'S BRTHG ZONE & GENERAL (ING 3)
Protective Gloves:WELDER'S GLOVES.
Eye Protection:CHEM WORK GOG W/FULL LNGTH FSHLD .
Other Protective Equipment:MAY INCLUDE ARM PROTECTORS, APRONS, HATS,
SHOULDER PROTECTION, AS WELL AS DARK SUBSTANTIAL CLOTHING. TRAIN
THE (ING 4)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD: SILICON, CHROMIUM, NICKEL, MOLYBDENUM, COPPER, AND
OTHER METALS LISTED IN INGREDIENT SECTION. GASEOUS REACTION
PRODUCTS MAY INCLUDE CARBON MONOXIDE AND CARBON DIOXIDE. OZONE AND
NITRO GEN OXIDES MAY BE FORMED BY THE RADIATION FROM THE ARC.

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:REASONABLY EXPECTED CONSTITUENTS OF
THE FUME WOULD INCL: FLUORIDES, COMPLEX OXIDES OF IRON, MANGANESE,
(SUPP DATA)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CNTNR OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE AND LO CAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.