BQWBF - 876948-00
- MSDS: BQWBF
- Manufacturer: DEVCON CORP
- Product Name: 876948-00
- National Stock Number: 8010-00-360-0012
Product Identification
Product ID:876948-00
MSDS Date:12/14/1989
FSC:8010
NIIN:00-360-0012
Kit Part:Y
MSDS Number: BQWBF
Responsible Party
DANVERS, MA 01923-3753
US
Emergency Phone: 508/777-1100
Info Phone: 508/777-1100
Preparer: DR. PAUL C. BRIGGS
Cage: 16059
Contractor
Telephone: 1-508-777-1100
Cage: 16059
Ingredients
BISPHENOL A DIGLYCIDYL ETHER
CAS: 1675-54-3
RTECS: TX3800000
Fraction By Weight: 10-30%
Hazards
LD50 LC50 Mixture:LD50 ORAL (RAT) 2460 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MILD IRRITATION OF SKIN, EYE.
METAL FILLER COULD SCRATCH CORNEA. NO DATA FOUND ON SPECIFIC
SYSTOMS. ALL INGREDIENTS ARE OF LOW ACUTE ORAL TOXICITY. CHRONIC:
1% OF WORKERS CAN BE SENSITIZED BY T OO MUCH SKIN CONTACT W/EPOXY
RESIN,ITCHING, SWELLING, OR RASH MAY RESULT.
Explanation of Carcinogenicity:THIS PRODUCT DOES NOT CONTAIN ANY
COMPOUNDS WHICH ARE LISTED BY NTP, IARC OR OSHA AS CARCINOGENIC.
Effects of Overexposure:ALLERGY, ECZEMA, SKIN CONDITION WILL RESULT
FROM OVEREXPOSURE.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF EYE,
SKIN, RESPIRATORY, KIDNEY, LIVER, PULMONARY DISORDERS MAY BE AT
INCREASED RISK FROM EXPOSURE.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING PROBLEM GIVE
ARTIFICIAL RESPIRATION. GET MEDICAL ATTENTION. EYE: IMMEDIATELY
FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES. GET IMMEDIATE
MEDICAL ATT ENTION. SKIN: FLUSH WITH SOAP AND WATER. REMOVE
CONTAMINATED CLOTHING AND SHOES. INGESTION: DO NOT INDUCE VOMITING.
GIVE WATER TO DRINK. NOTHING BY MOUTH IF UNCONSCIOUS. GET MEDICAL
ATTNENTION.
Fire Fighting
Flash Point Method:PMCC
Flash Point:>400F,>204C
Extinguishing Media:WATER, C02, DRY CHEMICAL, FOAM, ALCOHOL FOAM.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:PREVENT SKIN AND EYE CONTACT. SCRAPE UP,
DISCARD IN SUITABLE CONTAINERS. USE ABSORBENT MATERIAL. WASH SPOIL
AREA W/INDUSTRIAL CLEANING AGENT. TAKE PRECAUTIONS AGAINAT FIRE AND
PERSONAL OVEREXPOSURE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. HANDLE IN
ACCORDANCE W/PONTENTIAL HAZARD OF THE CURING AGENT USED. KEEP AWAY
FROM HEAT, SPARKS, AND OPEN FLAMES.
Other Precautions:WASH THOROUGHLY AFTER HANDLING AND BEFORE EATING OR
DRINKING. WEAR ADEQUATE PROTECTIVE EQUIPMENT TO PREVENT
OVEREXPOSURE TO NUISANCE PARTICULATES. A TLV 3.5 MG/M3 SHOULD BE
OBSERVED. REMOVE CONTAMINAT ED CLOTHING AS SOON AS POSSIBLE.
Exposure Controls
Respiratory Protection:NONE REQUIRED AT NORMAL HANDLING TEMPERTURES.
Ventilation:LOCAL EXHAUST IS RECOMMENDED FOR CONFINED AREAS. GENERAL
VENTILATION IS ADEQUATE FOR NORMAL USE.
Protective Gloves:PVC, NEOPRENE, BUTYL RUBBER, PVA, RUBBER
Eye Protection:SAFETY GLASSES - GOGGLES - FACE SHIELD
Other Protective Equipment:RUBBER BOOTS - APRON - EYE WASH STATION &
SAFETY SHOWER
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING, AND BEFORE
EATING, DRINKING OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
WASH THOROUGHLY AFTER HANDLING. DO NOT GET IN EYES, ON SKIN OR
CLOTHING, DO NOT BREATHE DUST, VAPOR OR MIST. KEEP CONTAINER
CLOSED. KEEP AWAY FROM HEAT, SPARKS, AND OPEN FLAMES, STORE IN
TIGHTLY CLOSE D CONTAINERS. DO NOT STORE NEAR COMBUSTIBLES. EMPTY
CONTAINER MAY CONTAIN HAZARDOUS RESIDUES. USE EXPLOSION PROOF
EQUIP.
Chemical Properties
HCC:F8
Vapor Pres:NIL AT 78F
Vapor Density:>1
Spec Gravity:3.0
Solubility in Water:NIL
Appearance and Odor:DARK GRAY PASTE WITH LITTLE ODOR.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS AND STRONG ACIDS.
Stability Condition to Avoid:OPEN FLAMES AND EXCESSIVE HEAT.
Hazardous Decomposition Products:OXIDES OF CARBON, ALDEHYDES AND ACIDS
FROM INCOMPLETE COMBUSTION.
Conditions to Avoid Polymerization:HEAT IS GENERATED WHEN MIXED WITH
EPOXY HARDENER. USE CAUTION WHEN MIXING A POUND OR MORE.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE OR LOCAL LAWS AND REGULATIONS. CONSULT FEDERAL,
STATE, OR LOCAL AUTHORITIES FOR PROPER DISPOSAL PROCEDURES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.