Product ID:MAPP GAS (0916-0009)
MSDS Date:01/01/1995
FSC:6830
NIIN:00-935-1125
MSDS Number: BQWMD

VICTOR EQUIPMENT CO

AIRPORT RD
DENTON, TX 76202
US

Emergency Phone: 817-566-2000

Info Phone: 817-566-2000

Cage: 63026

VICTOR EQUIPMENT CO

1007 DENTON, TX 76202 US

Telephone: 940-566-2000

Cage: 63026

LPG (LIQUEFIED PETROLEUM GAS)

CAS: 68476-85-7

RTECS: SE7545000

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9495

METHYL ACETYLENE PROPADIENE

CAS: 56960-91-9

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-IF INHALED, CAN CAUSE CNS
DEPRESSION. MAY CAUSE HEADACHES & DIZZINESS. MAY CAUSE ASPHYXIATION
IN HIGH CONCENTRATIONS. PROLONGED INHALATION MAY BE HARMFUL.
CONTACT W/LIQUID CAN CAUSE EYE BURNS. N O SKIN HAZARD IN NORMAL
USE. INGESTION IS NOT LIKELY AS PRODUCT IS A GAS AT ROOM
TEMPERATURE. CHRONIC-UNKNOWN.
Explanation of Carcinogenicity:MFR GAVE THE ABOVE LISTINGS ON THE MSDS
BUT NO OTHER COMMENTS WERE RECORDED.
Effects of Overexposure:INHALED:CNS DEPRESSION, HEADACHES & DIZZINESS.
ASPHYXIATION IN HIGH CONCENTRATIONS. EYE:BURNS. SKIN:NO HAZARD.
INGESTION:NOT LIKELY.
Medical Cond Aggravated by Exposure:MFR GAVE NO INFORMATION ON MSDS.

First Aid:INHALATION:REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE
ARTIFICIAN RESPIRATION &/OR GIVE OXYGEN BY TRAINED PERSONNEL. SEEK
MEDICAL ATTENTION. EYE:IMMEDIATELY FLUSH EYES W/PLENTY OF WATER.
GET MEDICAL A TTENTION IF IRRITATION PERSISTS. SKIN:AVOID BREATHING
VAPORS FROM HEATED MATERIAL. INGESTION:NO EMERGENCY CARE
ANTICIPATED.

Flash Point Method:CC
Flash Point:-144F,-98C
Autoignition Temp:Autoignition Temp Text:850F
Lower Limits:3.0
Upper Limits:11.0
Extinguishing Media:*DO NOT EXTINGUISH!* USE WATER TO COOL CONTAINERS.
IF SAFE, SHUT OFF FUEL. VENTILATE TO PREVENT EXPLOSIVE FUEL/AIR
MIX.
Fire Fighting Procedures:EVACUATE AREA & FIGHT FIRE FROM SAFE DISTANCE.
DO NOT EXTINGUISH UNTIL GAS SHUT-OFF IS POSSIBLE. WEAR SCBA (NIOSH
PRESSURE DEMAND) & FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:FLAMMABLE GAS. CAN READILY FORM EXPLOSIVE
MIXTURES AT OR ABOVE FLASHPOINT. FLASHBACK ALONG VAPOR TRAIL IS
POSSSIBLE.

Spill Release Procedures:ELIMINMATE IGNITION SOURCES INCLUDING INTERNAL
COMBUSTION ENGINES & POWER TOOLS. ISOLATE HAZARD AREA. KEEP
UNNECESSARY & UNPROTECTED PERSONNEL FROM ENTERING. AVOID BREATHING
VAPORS. AVOID CONTACT W/EY ES, SKIN & CLOTHING.
Neutralizing Agent:MFR GAVE NO INFORMATION ON MSDS.

Handling and Storage Precautions:USE SPARK-PROOF TOOLS & EXPLOSION
PROOF EQUIPMENT. GROUND & BOND CONTAINERS WHEN TRANSFERRING
MATERIAL. DO NOT REUSE CONTAINER. STORE IN COOL,DRY AREA
Other Precautions:"EMPTY" CONTAINERS RETAIN RESIDUE & CAN BE DANGEROUS.
DO NOT PRESSUREIZE,CUT,WELD,BRAZE,SOLDER,DRILL,GRIND OR EXPOSE
CONTAINERS TO HEAT,FLAME,SPARKS,STATIC ELECTRICITY OR OTHER
IGNITION SOURCES. RETUR N EMPTY CONTAINERS TO RECONDITIONER.

Respiratory Protection:A RESPIRATORY PROTECTION PROGRAM THAT MEETS OSHA
1910.134 & ANSI Z88.2 REQUIREMENTS MUST BE FOLLOWED WHENEVER
WORKPLACE CONDITIONS WARRENT A RESPIRATOR'S USE.
Ventilation:USE PROCESS ENCLOSURES, LOCAL EXHAUST OR OTHER ENGINEERING
CONTROLS TO KEEP AIRBORNE LEVELS BELOW RECOMMENDED LIMITS.
Protective Gloves:MFR GAVE NO INFORMATION ON MSDS.
Eye Protection:SEE SUPP DATA
Other Protective Equipment:MFR GAVE NO INFORMATION ON MSDS.
Work Hygienic Practices:MFR:? HMIS:USE GOOD INDUSTRIAL HYGIENE
PRACTICES. MINIMIZE CONTACT & WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
EYEWARE:WEAR SAFETY GLASSES W/SIDE SHIELDS (OR GOGGLES) AND A FACE
SHIELD.

HCC:G2
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:-54F,-48C
Melt/Freeze Pt:M.P/F.P Text:ND
Vapor Pres:97 PSIG
Vapor Density:>1
Spec Gravity:0.57 (LIQUID)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS GAS; CHARACTERSITIC PUNGENT ODOR.

Stability Indicator/Materials to Avoid:YES
NATURAL RUBBER, COPPER ALLOYS > 65%, SILVER. MERCURY, HALOGENS, ACIDS,
POTASSIUM, METALLIC SODIUM, OXIDIZERS.
Stability Condition to Avoid:MFR GAVE NO INFORMATION ON MSDS.
Hazardous Decomposition Products:SMOKE, OXIDES OF CARBON.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DO NOT ATTEMPT TO DISPOSE OF WASTE OR UNUSED
QUANTITIES. RETURN IN THE SHIPPING CONTAINER PROPERLY LABELED, WITH
VALVE PROTECTION CAP IN PLACE TO SUPPLIER FOR PROPER DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.