BQXJM - ASA 61 GRAY, EFH-400-S9
- MSDS: BQXJM
- Manufacturer: O BRIEN CORP
- Product Name: ASA 61 GRAY, EFH-400-S9
- National Stock Number: 8010-00N038302
Product Identification
Product ID:ASA 61 GRAY, EFH-400-S9
MSDS Date:10/21/1992
FSC:8010
NIIN:00N038302
MSDS Number: BQXJM
Responsible Party
SOUTH SAN FRANCISCO, CA 94080
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 415-761-2300
Cage: 30806
Contractor
Cage: 72556
Ingredients
RELEVANCE OF THIS DATA TO HUMANS IS NOT SIGNIFICANT
RTECS: 9999999ZZ
DUST NUISANCE; (NUISANCE DUST)
Fraction By Weight: 100%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
0.01
CAS: 25036-25-3
Fraction By Weight: 60%
10.
CAS: 7631-86-9
Fraction By Weight: <5%
OSHA PEL N/K
ACGIH TLV: N/K
(ORAL,RAT) 9500
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 25%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
ALUMINUM HYDROXIDE
CAS: 21645-51-2
Fraction By Weight: <5%
ACGIH TLV: 2 MG (AL)/M3
CURRENTLY BEING REVIEWED BY IARC. NO
RTECS: 9999999ZZ
EXPOS TO HIGH LEVELS (250 MG/MG) OF TITANIUM DIOXIDE
RTECS: 9999999ZZ
@ LOWER EXPOS LEVELS & MAY BE DUE TO HIGH LEVELS OF
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE: POSS IRRIT. INHAL: MAY
CAUSE HDCH & RESP IRRIT. SKIN: POSS IRRIT/SENSIT. ING 2: INGEST:
LOW ORDER OF TOX. POSS DEPRESS OF CNS. INHAL: IRRITATING, BUT NOT A
LIKELY RTE OF EXPOS DUE TO VERY L OW VOLATILITY. EYE: SEV IRRIT &
POSS DAM. SKIN: MOD TO SEV IRRIT. POSS ALLERGIC SKIN RXN IN
SUSCEPTIBLE(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: INDIVIDUALS. ING 3: IRRITATING TO
EYES, NOSE & UPPER RESP TRACT. ING 4: INGEST: LOW ORAL TOX. NO TOX
EFTS DUE TO INGEST ARE DESCRIBED IN LITERATURE. INHAL: IRRITATING
TO UPPER RESP TRACT. EY E: IRRITATING. ING 5: DUST EXPOS CAUSESEYE
IRRIT; BASIC EYE BURNS ARE POSS DPDNG UPON DURATION OF CONT. (SUPP
DATA)
Medical Cond Aggravated by Exposure:ING 1: MAY AGGRAVATE EXISTING SKIN
CONDITIONS, A DERMAL ALLERGEN. ING 2: NO INFO FOUND IN LITERATURE.
ING 3: O'BRIEN KNOWS OF NONE LISTED IN THE LITERATURE.
First Aid
First Aid:INGEST: DRINK 1-2 GLASSES OF WATER & INDUCE VOMIT BY PLACING
FINGER @ BACK OF THROAT. CONSULT PHYS/POIS CTL CTR IMMED. INHAL:
REMOVE FROM AREA TO FRESH AIR. EYE: IMMED BEGIN FLUSHING EYES
W/COOL WATER , OCCAS LIFTING LIDS TO ENSURE THOROUGHRINSING,
CONTINUE FOR @ LST 15 MIN. WHILE FLUSHING EYES, SEND FOR MED
ASSISTANCE. SKIN: WASH THOROUGHLY WITH SOAP AND WATER.
Fire Fighting
Flash Point:>600F,>316C
Lower Limits:SUPP DATA
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG, DRY
SAND.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DUST CLOUD OF 40 GRAMS PER CUBIC METER
CAN BE IGNITED BY A SPARK OF 20 MILLIJOULES.
Accidental Release
Spill Release Procedures:SWEEP UP CAREFULLY OR USE EXPLOSION-PROOF
VACUUM CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP ALL EQUIPMENT CLEAN & PROPERLY
GROUNDED TO AVOID STATIC ELECTRICITY BUILD-UP. KEEP WORK AREAS FREE
OF DUST THROUGH ADEQ VENT.
Other Precautions:AVOID PROLONGED CONT W/SKIN. DO NOT INGEST. KEEP OUT
OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:USE A PROPERLY FITTED NIOSH/MSHA APPROVED
MECHANICAL RESPIRATOR/MASK TO AVOID BREATHING DUST. CAREFULLY
FOLLOW RESPIRATOR MFR'S INSTRUCTION FOR USE.
Ventilation:PROVIDE SUFFICIENT VENT IN VOL & PATTERN TO KEEP AIR CONTAM
CONC BELOW APPLIC OSHA PEL/ACGIH TLV TWA LIMIT.
Protective Gloves:SYNTHETIC RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE COVERALLS RECOMMENDED. REMOVE AND
WASH CONTAMINATED CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
LEL: 40 GRAMS PER M3 AIR. EFTS OF OVEREXP: MATL IS RPTD TO EXHIBIT A
LOW ORDER OF TOX VIA INHAL & INGEST. PRLNGD SKIN CONT MAY RSLT IN
MINOR MECH IRRIT. CHRONIC: ING 2: IN VITRO LAB STUDIES HAVE SHOWN
THAT SOME EPOXY RESINS HAVE MUTAGENIC CAPABILITIES. ALL EPOXY
RESINS SHOULD BE TREATED AS POTENTIAL MUTAGENS. (ING 6)
Chemical Properties
Vapor Pres:SEE INGRED
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:STATIC ELECTRICAL CHARGES.
Hazardous Decomposition Products:MAY PRODUCE FUMES WHEN HEATED TO
DECOMPOSITION. FUMES MAY CNTN CARBON MONOXIDE, CARBON DIOXIDE &
OXIDES OF NITROGEN.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.