Product ID:FLEXON
MSDS Date:12/03/1992
FSC:6850
NIIN:00F028089
MSDS Number: BRBMJ

GARON PRODUCTS INC

2150 HWY 3535
SEA GIRT, NJ 08750
US

Emergency Phone: 800-631-5380

Info Phone: 800-631-5380

Cage: 2N005

GARON PRODUCTS INC

1924 NEW BRUNSWICK, NJ 08901 US

Telephone: 908-449-1776

Cage: 2N005

XYLENE, DIMETHYLBENZENE, XYLOL

CAS: 1330-20-7

RTECS: ZE2100000

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TOLUENE

CAS: 108-88-3

RTECS: XS5250000

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

HEPTANE

CAS: 142-82-5

RTECS: MI7700000

OSHA PEL 500 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9293

HEXANE, N-HEXANE

CAS: 110-54-3

RTECS: MN9275000

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HEADACHE, DIZZINESS,
NAUSEA, LOSS OF CONSCIOUSNESS, IRRITATION OF MUCOUS MEMBRANES.
INGESTION: VOMITING. SKIN: DRYNESS. EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: NERVE DAMAGE W/NUMBNESS, TINGLING,
& WEAKNESS OF ARMS & LEGS.

First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH ABUNDANTLY W/CLEAN
WATER & REFER TO PHYSICIAN. INHALATION: REMOVE TO FRESH AIR OR GIVE
OXYGEN. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION
IN ALL CASES.

Flash Point Method:CC
Flash Point:<0F
Lower Limits:1.2%
Upper Limits:6.7%
Extinguishing Media:DRY CHEMICAL, FOAM, CO2
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA. USE WATER SPRAY
TO COOL FIRE-EXPOSED STRUCTURE & DISPERSE VAPOR CLOUD IF FIRE ISN'T
PRESENT.
Unusual Fire/Explosion Hazard:AUTOIGNITION TEMPERATURE: 433F. VAPOR IS
HEAVIER THAN AIR & MAY TRAVEL CONSIDERABLE DISTANCE TO A SOURCE OF
IGNITION & FLASHBACK.

Spill Release Procedures:ABSORB SPILL ON SAND, EARTH, VERMICULITE,
OIL-DRI, SOL-SPEED-DRI. SHOVEL ABSORBED MATERIAL INTO STEEL
CONTAINER & COVER.

Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED & STORE
IN APPROVED SOLVENT STORAGE AREA. KEEP AWAY FROM HEAT, OPEN FLAMES,
SPARKS, & STRONG OXIDIZING AGENTS.

Ventilation:LOCAL EXHAUST: DURING PROCESSING TO REMOVE VAPORS.
MECHANICAL (GENERAL): EXPLOSION-PROOF EQUIPMENT.
Protective Gloves:POLYVINYL ACETATE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:PROTECTIVE CLOTHING AS REQUIRED TO PREVENT
SKIN CONTACT
Work Hygienic Practices:KEEP WORK AREA CLEAN. OBSERVE GOOD PERSONAL
HYGIENE.
Supplemental Safety and Health

Boiling Pt:B.P. Text:152F
Vapor Pres:77
Vapor Density:3.3
Appearance and Odor:BLACK, RUBBERY SOLVENTY ODOR.

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, OPEN FLAMES, SPARKS, HOT SURFACES, &
OTHER SOURCES OF IGNITION
Hazardous Decomposition Products:CO, CO2, ZINC, MAGNESIUM, SULFUR,
HYDROGEN CHLORIDE

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/FEDERAL, STATE, & LOCAL
CHEMICAL & SOLVENT WASTE DISPOSAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.