BRCXK - MULTIPURPOSE HYDROCAL FGR LSS
- MSDS: BRCXK
- Manufacturer: UNITED STATES GYPSUM COMPANY
- Product Name: MULTIPURPOSE HYDROCAL FGR LSS
- National Stock Number: 5610-00F027985
Product Identification
Product ID:MULTIPURPOSE HYDROCAL FGR LSS
MSDS Date:08/07/1992
FSC:5610
NIIN:00F027985
MSDS Number: BRCXK
Responsible Party
CHICAGO, IL 60606-4678
US
Emergency Phone: 312-606-4542
Info Phone: 312-606-4542
Cage: 61357
Contractor
Telephone: 312-606-4000 (EMERG /4542)
Cage: 61357
Ingredients
TRICALCIUM SILICATE, DICALCIUM
CAS: 65997-15-1
RTECS: VV8770000
Fraction By Weight: 0-8%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
NAPTHALENESULFONIC ACID, FORMALDEHYDE POLYMER, AMMONIUM
CAS: 9069-80-1
Fraction By Weight: 0-4%
POLYVINYL ALCOHOL
CAS: 9002-89-5
RTECS: TR8100000
Fraction By Weight: 0-4%
STARCH
CAS: 9005-25-8
RTECS: GM5090000
Fraction By Weight: 0-2%
OSHA PEL 15 MG/CUM
ACGIH TLV: 10 MG/CUM TOTAL DUST
RED IRON OXIDE/IRON (III) OXIDE/FERRIC OXIDE/YELLOW FERRIC
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 0-20%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
POTASSIUM SULFATE
CAS: 7778-80-5
RTECS: TT5900000
Fraction By Weight: 0-1.5%
HYDROLYZED PROTEIN
ALUMINUM (POWDER)
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: 0-1.7%
OSHA PEL 15 MG/CUM
ACGIH TLV: 10 MG/CUM (DUST)
POTASSIUM SODIUM TARTRATE *92-2*
CAS: 304-59-6
Fraction By Weight: 0-0.8%
NAPTHALENESULFONIC ACID, POLYMER W/FORMALDEHYDE, POTASSIUM
CAS: 9069-79-8
Fraction By Weight: 0-0.6%
PETROLEUM DISTILLATE - STREIGHT RUN MIDDLE
CAS: 64741-89-5
RTECS: PY8041500
Fraction By Weight: 0-0.6%
OSHA PEL 5 MG/CUM (MIST)
ACGIH TLV: 5 MG/CUM (MIST)
MELAMINE, FORMALDEHYDE POLYMER, METHYLATED
CAS: 68002-20-0
Fraction By Weight: 0-0.5%
CITRIC ACID
CAS: 77-92-9
RTECS: GE7350000
Fraction By Weight: 0-0.5%
AMMONIUM CHLORIDE
CAS: 12125-02-9
RTECS: BP4550000
Fraction By Weight: 0-0.4%
OSHA PEL 10 MG/CUM
ACGIH TLV: 10 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
DOUBLE HYDRATED DOLOMITIC LIME
CAS: 39445-23-3
Fraction By Weight: 0-0.4%
OSHA PEL 5 MG/CUM (TRACE)
ACGIH TLV: 5 MG/CUM (TRACE)
ALUMINUM SULFATE
CAS: 10043-01-3
RTECS: BD1700000
Fraction By Weight: 0-0.3%
OSHA PEL 2 MG/CUM (TRACE)
ACGIH TLV: 2 MG/CUM (TRACE)
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
SUCCINIC ANHYDRIDE; SUCCINYL OXIDE; BUTANEDIOIC ANHYDRIDE
CAS: 108-30-5
RTECS: WN0875000
Fraction By Weight: 0-1%
TRIBUTYL PHOSPHATE
CAS: 126-73-8
RTECS: TC7700000
Fraction By Weight: 0-0.1%
OSHA PEL 5 MG/M3
ACGIH TLV: 0.2 PPM; 9293
HYDROXYPROPYL METHYCELLULOSE
CAS: 9004-65-3
RTECS: NF9125000
Fraction By Weight: 0%-TRACE
PLASTER OF PARIS; GYPSUM HEMIHYDRATE
CAS: 26499-65-0
RTECS: TP0700000
Fraction By Weight: 90-100%
OSHA PEL 10 MG/CUM
ACGIH TLV: 15/5 MG/CUM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: BURNS &
DRYNESS. INHALATION: COUGHING, SNEEZING, & NASAL IRRITATION.
Explanation of Carcinogenicity:NONE
Medical Cond Aggravated by Exposure:UPPER RESPIRATORY & LUNG DISEASE
SUCH AS BRONCHITIS, EMPHYSEMA & ASTHMA
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/WATER.
INHALATION: REMOVE TO FRESH AIR. INGESTION: PLASTER HARDENS WHEN
WETTED & IF INGESTED, MAY RESULT IN OBTRUCTION. OBTAIN MEDICAL
ATTENTION IN ALL CA SES.
Fire Fighting
Flash Point:NONE
Extinguishing Media:NOT COMBUSTIBLE
Accidental Release
Spill Release Procedures:SWEEP OR VACUUM MATERIAL FROM SPILLAGE INTO
WASTE CONTAINER FOR DISPOSAL. AVOID DUSTING CONDITIONS. IF WASHED
DOWN, MAY PLUG DRAINS. IF ALREADY MIXED W/WATER, SCRAPE UP & WASH
DOWN RESIDUE.
Handling
Handling and Storage Precautions:BE SURE PROPER VENTILATION &
RESPIRATORY & EYE PROTECTION ARE USED INDUSTY CONDITIIONS.
Exposure Controls
Respiratory Protection:WHEN DUSTY CONDITION EXISTS, WEAR APPROVED DUST
MASK TO GUARD AGAINST NUISANCE PARTICLES.
Ventilation:GENERAL & LOCAL EXHAUST TO KEEP BELOW TLV REQUIREMENTS
Protective Gloves:AS REQUIRED
Eye Protection:GOGGLES
Supplemental Safety and Health
WHEN MIXED W/WATER, THIS MATERIAL HARDENS & THEN SLOWLY BECOMES HOT.
DON'T ATTEMPT TO MAKE A CAST ENCLOSING ANY PART OF THE BODY.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE SEVERE BURNS THAT
MAY R EQUIRE SURGICAL REMOVAL OF AFFECTED TISSUE.
Chemical Properties
Decomp Temp:Decomp Text:1450C
Spec Gravity:2.7-3
Solubility in Water:0.2%
Appearance and Odor:WHITE POWDER W/LOW ODOR
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS
Hazardous Decomposition Products:ABOVE 1450C GENERATES CALCIUM OXIDE &
SULFUR DIOXIDE
Disposal
Waste Disposal Methods:THIS MATERIAL CAN BE DISPOSED OF AS INERT SOLID
IN A LANDFILL OR BY OTHER PROCEDURES IN ACCORDANCE W/FEDERAL,
STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.