BRDPN - K-1573A

  • MSDS: BRDPN
  • Manufacturer: CHEM LUBE CORP
  • Product Name: K-1573A
  • National Stock Number: 9150-00N034865
Product Identification

Product ID:K-1573A
MSDS Date:10/09/1986
FSC:9150
NIIN:00N034865
MSDS Number: BRDPN

Responsible Party
CHEM-LUBE CORP
8010 EAST 88TH ST
INDIANAPOLIS, IN 46256
US

Emergency Phone: 317-849-4476;317-255-1484

Info Phone: 317-849-4476

Cage: 2Y081

Contractor
CHEM-LUBE CORP
INDIANAPOLIS, IN 46256 US

Telephone: 317-849-4476

Cage: 2Y081

Ingredients

PETROLEUM DISTILLATE

CAS: 8002-05-9

RTECS: SE7449000


ACRYLAMIDE, POLYMERS; (COMBUSTIBLE POLYACRYLAMIDE)

CAS: 9003-05-8

RTECS: AS3700000

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: IRRITATING AND WILL
INJURE EYE TISSUES IF NOT WASHED IMMEDIATELY. SKIN: MILD IRRITATION
ON PROLONGED CONTACT. INGEST: MAY CAUSE BRONCHIOPNEUMONIA,
PULMONARY EDEMA. INHAL: IRRITATION TO RE SPIRATORY TRACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION TO EYES OR SKIN. NAUSEA AS A RESULT
OF INHALATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. GET MEDICAL HELP IF IRRITAION
PERSISTS. EYES: IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER FOR
AT LEAST 20 MIN. GET IMMEDIATE MEDICAL HELP. INGEST: DO NOT INDUCE
VOMIT ING. GET MEDICAL HELP. INHAL:REMOVE FROM EXPOSURE, ADMINISTER
ARTIFICIAL RESPIRATION IF BREATHING STOPS. CALL A MD.

Fire Fighting

Flash Point Method:SCC
Flash Point:140F,60C
Extinguishing Media:USE FOAM, DRY CHEMICAL, OR WATER SPRAY TO
EXTINGUISH FIRE.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
COMBUST LIQ CAN BE A FIRE HAZ @/ABOVE FL PT. EMPTY CONTRS MAY CNTN
SOLV VAP. DO NOT PRESSURIZE, CUT, (SUPP DATA)

Accidental Release

Spill Release Procedures:ELIMINATE SOURCES OF IGNITION/HOT SURFACES.
USE DRY ABSORBANTS. DO NOT ADD WATER/VERY SLIPPERY SURFACE WILL
FORM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:PRODUCT HAS A COMBUSTIBLE COMPONENT.
USE ALL THE PRECAUTIONS ASSOCIATED WITH HANDLING AND STORAGE OF
COMBUSTIBLE MATERIALS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR RECOMMENDED IN
CONFINED SPACES OR WHEN PRODUCT IS HEATED.
Ventilation:LOCAL EXHAUST/MECHANICAL(GENERAL): RECOMMENDED.
Protective Gloves:RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH FOUNTAIN, SAFETY SHOWERS.
Supplemental Safety and Health
FIRE FIGHT PROC: HEAT/WELD EMPTY CONTAINERS.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:>100F,>38C
Vapor Pres:1@30C
Spec Gravity:0.98-1(H*2O=1)
Evaporation Rate & Reference:1(BUTYL ACETATE=1)
Solubility in Water:SOLUBLE
Appearance and Odor:MILKY WHITE LIQUID, MINERAL SPIRITS ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:STORE BETWEEN 32F TO 120F. AVOID HIGHER OR
LOWER TEMPERATURES.
Hazardous Decomposition Products:VAPORS FROM PETROLEUM DISTILLATES.
Conditions to Avoid Polymerization:AVOID HIGHER OR LOWER TEMPERATURES.

Disposal

Waste Disposal Methods:FOLLOW LOCAL, STATE, AND FEDERAL GUIDELINES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.