Product ID:484 TOOL STEEL DCF ORANGE PAINT
MSDS Date:04/07/1987
FSC:9510
NIIN:00N038352
MSDS Number: BRDYM

CARPENTER TECHNOLOGY CORP

READING, PA 19603
US

Emergency Phone: 215-371-2000

Info Phone: 215-371-2000

Cage: 71321

CARPENTER TECHNOLOGY CORP

14662 READING, PA 19612-4662 US

Telephone: 610-208-2134 / 610-208-2457/2457

Cage: 71321

IRON OXIDE; (IRON)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 93.5%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 5%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 1%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 0.35%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SPECIALTY STEEL ALLOYS ARE GEN NOT
CONSIDERED HAZ IN FORM SHIPPED. HOWEVER, IF YOUR PROCESS INVOLVES
GRINDING, MELTING, WELDING, CUTTING/ANY OTHER PROCESS THAT CAUSES
RELS OF DUST/FUME, HAZ LEVELS OF DUST/FUME OF CONSTITUENTS OF
THESE ALLOYS COULD BE GEN. CHROMIUM:FERROCHROME ALLOYS HAVE BEEN
ASSOC W/ (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL:IARC GP2B (IARC MNGRPH VOL49,
P257,1990); ANTIC TO BE A CARCIN (NTP 6TH ANN RPT ON CARCINS, 1991.
Effects of Overexposure:HLTH HAZ:LUNG CHANGES IN WORKERS EXPOSED TO
THESE ALLOYS. MOLYBDENUM:OXIDES OF MOLYBDENUM HAVE CAUSED IRRIT OF
EYES, NOSE & THROAT, WT LOSS & DIGEST DISTURBS IN EXPTL ANIMALS.
NICKEL:FUMES ARE RESP IR RITS & MAY CAUSE RESP DISEASE. SKIN CONT
CAN ALSO CAUSE ALLERGIC SKIN RASH. NICKEL & ITS CMPDS HAVE BEEN
(SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:MOVE PERSON TO FRESH AIR UNTIL RECOVERED, CONSULT MD.
SKIN:WASH W/WATER & MILD DETERGENT, CONSULT MD. EYE:FLUSH
THOROUGHLY W/WATER FOR AT LEAST 15 MINUTES, CONSULT MD.
INGEST:WHILE INGESTION OF LARGE ENOUGH QUANTITIES TO CAUSE
HEALTHEFFECTS IS UNLIKELY, CONSULT MD IF IT OCCURS.

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:PRODUCT IS A SOLID METAL AS SHIPPED. NO
POTENTIAL FOR SPILL OR LEAK.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IF YOUR PROCESS CAUSES RELEASE OF DUST/FUME IN
EXCESS OF PEL, NIOSH/MSHA APPROVED RESPIRATORS FOR PROTECTION
AGAINST AIRBORNE DUST/FUMES SHOULD BE WORN. NIOSH/MSHA APPROVED
RESPIRATORS SHOULD BE USED I/A/W 29 CFR 1910.134.
Ventilation:IF YOUR PROCESS CAUSES RELS OF DUST/FUME, USE LOC & GEN
EXHST VENT TO KEEP AIRBORNE CONCS OF DUST/FUMES BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:BARRIER CREAMS MAY BE NECESSARY TO PREVENT
SKIN SENSITIZATION & DERMATITIS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP:REPORTED TO CAUSE CANCER OF LUNGS & SINUSES.

Boiling Pt:B.P. Text:HIGH
Melt/Freeze Pt:M.P/F.P Text:>2400F,>131
Vapor Pres:NIL
Vapor Density:NIL
Spec Gravity:7.5-8.5
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID, ODORLESS METAL.

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.