BRFBL - SPEEDCRAFT LO-SHEEN ENAMELS, 5B 5-90

  • MSDS: BRFBL
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: SPEEDCRAFT LO-SHEEN ENAMELS, 5B 5-90
  • National Stock Number: 8010-00N038516
Product Identification

Product ID:SPEEDCRAFT LO-SHEEN ENAMELS, 5B 5-90
MSDS Date:06/04/1990
FSC:8010
NIIN:00N038516
MSDS Number: BRFBL

Responsible Party
PPG INDUSTRIES INC
260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555; 800-441-9695

Cage: 47695

Contractor
PPG INDUSTRIES INC
PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

Ingredients

HYDROTREATED HEAVY NAPHTHA

CAS: 64742-48-9

Fraction By Weight: 2-5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


NAPHTHA, MEDIUM ALIPHATIC; (MEDIUM ALIPHATIC SOLVENT

CAS: 64742-88-7

Fraction By Weight: 20-25%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 20-25%


DIOXIDE. ANIMALS INHAL MASSIVE QTYS OF TITANIUM

RTECS: 9999999ZZ


STUDIES W/HUMANS INVOLVED IN MFR OF THIS PIGMENT

RTECS: 9999999ZZ


INHAL OF TITANIUM DIOXIDE DUSTS FROM COATINGS IS VERY

RTECS: 9999999ZZ


SIGNIFICANT HAZARD FOR MAN.

RTECS: 9999999ZZ


PERSISTENT SKIN/EYE IRRITATION OR BREATHING

RTECS: 9999999ZZ


TO DETERM TYPE OF AIRBORNE CONTAMS AGAINST WHICH

RTECS: 9999999ZZ


BELOW STATED LIM & TO REMOVE DECOMP PRODS DURING

RTECS: 9999999ZZ


1); (CALCIUM CARBONATE)

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 35-40%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10-15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL/FATAL IF
SWALLOWED. EYE:CAUSES IRRIT. REDNESS, ITCH, BURNING SENSATION &
VISUAL DISTURBS MAY INDICATE EXCESS CONT. SKIN:MAY CAUSE MOD IRRIT.
DRYNESS, ITCH, CRACKING, BURNING, REDN ESS & SWELL ARE CNDTNS ASSOC
W/EXCESS CONT. INHAL:VAP & SPRAY MIST MAY BE HARMFUL IF INHALED.
VAP (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:IRRITS EYES, NOSE & THROAT. RPTD EXPOS
TO HIGH VAP CONCS MAY CAUSE IRRIT OF RESP SYS & PERM BRAIN & NERV
SYS DMG. INTENT MISUSE BY DELIB CONC & INHAL CONTENTS CAN BE
HARMFUL/FATAL. EYE WATERI NG, HDCHS, NAUS, DIZZ & LOSS OF COORD ARE
INDICATIONS THAT SOLV LEVELS ARE TOO HIGH. CHRONIC:AVOID LONG TERM
& (SUPDAT)

First Aid

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
FOR AT LST 15 MINS. SKIN:FLUSH IMMED W/PLENTY OF WATER FOLLOWED BY
WASHING W/SOAP & WATER. INHAL:REMOVE TO FRESH AIR. APPLY ARTF RESP
& OT HER SUPPORTIVE MEASURES AS REQD. IF ANYOF FOLLOWING OCCUR
DURING/FOLLOWING USE OF PROD, CONT POIS CTL CTR, EMER ROOM/MD
IMMED, HAVE MSDS INFO AVAIL:INGEST; EXCESS EXPOS TO CORR MATL; (ING
10)

Fire Fighting

Flash Point Method:PMCC
Flash Point:107F,42C
Lower Limits:1%
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
(SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)

Accidental Release

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHLD BE PERMITTED IN AREA.
REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSORB MATL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE >120F. STORE LG QTYS IN
BLDGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS II COMBUST
LIQS. CNTNRS SHOULD BE GROUNDED WHEN POURING.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COATING SYS,
READ MSDS(S) FOR OTHER COMPONENT(S) BEFORE BLENDING AS RESULTING
MIXT MAY HAVE HAZS OF ALL OF ITS PARTS. AVOID FREE FALL OF LIQS IN
EXCESS OF FEW INC HES.

Exposure Controls

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CONTROLS, VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD
(TC-23C-) PAINT SPRAY/AIR SUPPLIED (TC-19C-) RESPS MAY ALSO REDUCE
EXPOS. READ RESP MFR'S INSTR UCTIONS & LITERATURE CAREFULLY (ING
11)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMS, LEL(ING 12)
Protective Gloves:NITRILE/NEOPRENE RUB, POLYVINYL ALCOHOL.
Eye Protection:CHEM WORK GOGG/FULL LGTH FCSHLD .
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
EXTING MEDIA:CLASS II COMBUST FIRES. FIRE FIGHT PROC:POSS
AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZS ARE PREF. EXPLO HAZ:SURFS. TOX GASES MAY FORM WHEN PROD IS
CONTACTED BY FLAME/HOT SURFS. HAZ DECOMP PROD:INCL:CARBON
MONOXIDE. EFTS OF OVEREXP:RPTD CONT. PROD CONTAINS TITANIUM (ING 6)

Chemical Properties

Boiling Pt:B.P. Text:>280F,>138C
Vapor Pres:<2
Vapor Density:HVR/AIR
Spec Gravity:1.3-1.4
Evaporation Rate & Reference:<18 (BUOAC=100)
Solubility in Water:<1%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACTERISTIC OF SOLVENTS
LISTED IN INGREDIENTS.
Percent Volatiles by Volume:<49

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/PROD MAY
PRDCE FUMES (SUPDAT)

Disposal

Waste Disposal Methods:WASTE MATL MUST BE DISPOSED OF I/A/W FEDERAL,
STATE, PROVINCIAL & LOCAL ENVIRON CONTROL REGS. EMPTY CNTNRS SHOULD
BE RECYCLED OR DISPOSED OF THROUGH APPROVED WASTE MANAGEMENT
FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.