BRFBP - THROMBORSCREEN THROMBOPLASTIN DRIED 200 (SU

  • MSDS: BRFBP
  • Manufacturer: PACIFIC HEMOSTASIS
  • Product Name: THROMBORSCREEN THROMBOPLASTIN DRIED 200 (SU
  • National Stock Number: 6550-00N038521
Product Identification

Product ID:THROMBORSCREEN THROMBOPLASTIN DRIED 200 (SU
MSDS Date:08/10/1992
FSC:6550
NIIN:00N038521
MSDS Number: BRFBP

Responsible Party
PACIFIC HEMOSTASIS
2493 PORTOLA RD
VENTURA, CA 93003
US

Emergency Phone: 805-644-0848

Info Phone: 805-644-0848

Cage: FO220

Contractor
PACIFIC HEMOSTASIS
HIALEAH, FL 33010-2427 US

Telephone: 305-885-0131

Cage: FO220

Ingredients

0.1 PPM, C, S(HN*3); 0.3 MG/M3, C, S

CAS: 26628-22-8

RTECS: VY8050000

Fraction By Weight: 5%

OSHA PEL SEE INGREDIENT NAME

ACGIH TLV: 0.3 MG/M3

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:LD50:(ORAL,RAT)29 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE AND CHRONIC HEALTH HAZARDS: CAN
CAUSE SKIN IRRITATION. NEUROLOGICAL EFFECTS IF INHALED AT EXTREMELY
HIGH LEVELS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:INHAL: HEADACHE, DIZZINESS, BLURRED VISION,
LOWERED BLOOD PRESSURE, SLOW PULSE AND RESPIRATORY TRACT
IRRITATION. SKIN CONTACT: IRRITATION IF IT COMES INTO PROLONGED
CONTACT WITH MOIST SKIN.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.

First Aid

First Aid:INGEST: INDUCE VOMITING BY GIVING WATER AND P-AMINO
PROPIOPHENONE. INHAL: REMOVE FROM EXPOSURE, APPLY ARTIFICIAL
RESPIRATION IF NECESSARY. SKIN: FLUSH WITH WATER FOR 15 MINUTES.
EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. CONTACT PHYSICIAN
IN INSTANCES OF ALL OF THE ABOVE.

Fire Fighting

Extinguishing Media:USE DRY CHEMICAL OR SODA ASH. DO NOT USE WATER.
SODIUM METAL CAN REACT W/WATER TO FORM HYDROGEN.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:EXPLOSION HAZARD BY HEAT/SHOCK, EXPLOSIVE
METAL AZIDES FORM W/COPPER/LEAD.

Accidental Release

Spill Release Procedures:RECOVER SPILT MATERIAL OR ABSORB ON AN INERT
MATERIAL AND PLACE IN A NON-METAL CONTAINER. RINSE AREA WITH WATER.
WEAR PROTECTIVE EQUIPMENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:SODIUM AZIDE CAN REACT W/COPPER AND
LEAD PLUMBING. SODIUM HYDROXIDE CAN BE USED AS A CLEANING AGENT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Protective Gloves:LABORATORY-GRADE LATEX.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NO SPECIAL REQUIREMENTS BEYOND NORMAL SAFE
LAB PRACTICES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR TRADE NAME/PART NO: DET, 0176065 10-0356-GEN.

Chemical Properties

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability

Stability Indicator/Materials to Avoid:YES
HYDRAZOIC ACID, PB, AG, HG, CU, CS*2, BR*2, BENZYL CHLORIDE AND KOH.
Stability Condition to Avoid:HEAT/SHOCK.
Hazardous Decomposition Products:SODIUM AZIDE DECOMPOSES TO SODIUM
METAL & CAN OMIT HYDRAZOIC ACID, WHICH IS A HIGHLY TOXIC FUME, @
TEMP @ & ABOVE 350C.

Disposal

Waste Disposal Methods:SMALL QTY OF MATERIAL MAY BE POURED INTO A
DRAIN/SEWER AND FLUSHED W/LARGE QTY OF WATER. DISPOSE OF IN
ACCORDANCE WITH ALL LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.