BRJCJ - AIR PATROL, 4374
- MSDS: BRJCJ
- Manufacturer: NATIONAL CHEMSEARCH DIV OF NCH CORP
- Product Name: AIR PATROL, 4374
- National Stock Number: 6830-00N039278
Product Identification
Product ID:AIR PATROL, 4374
MSDS Date:11/14/1991
FSC:6830
NIIN:00N039278
MSDS Number: BRJCJ
Responsible Party
US
Emergency Phone: 214-438-1381
Info Phone: 214-438-1381
Preparer: M. DICKSON
Cage: DO481
Contractor
Telephone: 972-438-0563
Cage: 20913
Ingredients
ETHYLENE GLYCOL (SARA III)
CAS: 107-21-1
RTECS: KW2975000
OSHA PEL 50 PPM, C
ACGIH TLV: 50 PPM, C
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
POLYETHYLENE
CAS: 9002-88-4
RTECS: TQ3325000
Hazards
LD50 LC50 Mixture:LD50 (ORAL,RAT): 8540 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGESTION: SLIGHTLY TOXIC TO
HUMANS. SYMPTOMS INCLUDE MENTAL SLUGGISHNESS FOLLOWED BY BREATHING
AND HEART FAILURE, KIDNEY AND BRAIN DAMAGE, POSSIBLY DEATH IN CASES
OF MASSIVE INGESTION. SKIN CO NTACT MAY BE MILDLY IRRITATING TO
SENSITIVE SKIN, LUDING NOSE. EYE: FIBERS IN PRODUCT MAY CAUSE (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: MECHANICAL IRRITATION TO EYES
CAUSING REDNESS, TEARING AND DISCOMFORT. CHRONIC: MARKED IRRITATION
TO EYES IS POSSIBLE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE PATIENT FROM CONTAMD AREA.IF BRTHG HAS STOPPED,
GIVE ARTF RESP, THEN OXYGEN IF NEEDED. CONT PHYS IMMED. EYE: FLUSH
W/WATER FOR AT LST 15 MINS. CONT PHYS IMMED. SKIN: REMOVE CONTAMD
CLTHG & WASH CONTAMD SKIN W/LRG AMTS OF SOAP& WATER. IF IRRIT
PERSISTS, CONT PHYS. INGEST: INDUCE VOMIT OF CONSCIOUS PATIENT
IMMED BY GIVING 2 GLASSES OF WATER & PRESSING FINGER DOWN THROAT.
CONT (SUPDAT)
Fire Fighting
Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .USE WATER SPRAY TO COOL FIRE-EXPOSED
STRUCTURES AND VESSELS.
Unusual Fire/Explosion Hazard:FOAM/WATER CAN CAUSE FROTHING. IF PROD IS
EXPOS TO HIGH HEAT FROM FIRE, VAPS MAY BE RELSD AND CAN CAUSE
HARMFUL EFTS SUCH AS CNS DEPRESS, KIDNEY AND LIVER DMG.
Accidental Release
Spill Release Procedures:ELIM IGNIT SOURCES. PLACE LEAKING CNTNRS IN
VENT AREA. IF FIRE POTNTL EXISTS, BLANKET SPILL W/FOAM/USE WATER
SPRAY TO DISPERSE VAPS TO CLEAN UP SPILL. FLUSH AREA W/WATER/USE
ABSORB. AVOID RUNOFF INTO STORM SEWER & DITCHES WHICH LEAD TO
NATRL (SUPDAT)
Neutralizing Agent:NOT APPLICABLE.
Handling
Handling and Storage Precautions:KEEP AWAY FROM FLAME. KEEP CONTAINERS
CLOSED.
Other Precautions:AVOID CONTACT WITH EYES, SKIN AND CLOTHES. WASH
THOROUGHLY WITH SOAP AND WATER AFTER HANDLING. WASH CONTAMINATED
CLOTHING THOROUGHLY BEFORE REUSE. READ ENTIRE LABEL BEFORE USING
PRODUCT. KEEP OUT OF R EACH OF CHILDREN.
Exposure Controls
Respiratory Protection:DUE TO HIGH VISCOSITY OF PRODUCT AND LOW VAPOR
PRESSURE, USE OF RESPIRATOR IS NOT REQUIRED. IN EVENT OF AN
EMERGENCY SUCH AS FIRE, WEAR A NIOSH/MSHA APPROVED SELF-CONTAINED
BREATHING APPARATUS (SCBA).
Ventilation:LOCAL EXHAUST RECOMMENDED WHEN APPROPRIATE TO CONTROL
EMPLOYEE EXPOSURE.
Protective Gloves:NITRILE RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NOT APPLICABLE.
Work Hygienic Practices:WASH THOROUGHLY WITH SOAP AND WATER AFTER
HANDLING. WASH CONTAMINATED CLOTHING THOROUGHLY BEFORE REUSE.
Supplemental Safety and Health
FIRST AID PROCEDURES: PHYSICIAN IMMEDIATELY. NOTES TO PHYSICIAN: CAN
CAUSE PULMONARY EDEMA. SIGNS AND SYMPTOMS OF PULMONARY EDEMA CAN BE
DELAYED FOR SEVERAL HOURS. SPILL PROCEDURE: WATERWAYS. CLEAN UP IN
ACCORDANCE WITH FEDERAL, STATE, ANDLOCAL LAWS.
Chemical Properties
Boiling Pt:B.P. Text:230F,110C
Vapor Pres:20
Vapor Density:2
Spec Gravity:1.08 (H*2O=1)
pH:7-8
Evaporation Rate & Reference:0.1 (BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:YELLOW, OPAQUE, MILD ODOR.
Percent Volatiles by Volume:80
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:OXIDES OF CARBON.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL FEDERAL, STATE
AND LOCAL POLLUTION REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.