BRMFF - GF 1100 SERIES FLUXES (GF-1125,GF-1135,GF-1
- MSDS: BRMFF
- Manufacturer: GARDINER METAL CO
- Product Name: GF 1100 SERIES FLUXES (GF-1125,GF-1135,GF-1
- National Stock Number: 3439-00-009-8808
Product Identification
Product ID:GF 1100 SERIES FLUXES (GF-1125,GF-1135,GF-1
MSDS Date:04/23/1993
FSC:3439
NIIN:00-009-8808
MSDS Number: BRMFF
Responsible Party
CHICAGO, IL 60632
US
Emergency Phone: 312-847-0100, 800-424-9300
Info Phone: 312-847-0100
Cage: 73766
Contractor
Telephone: 312-847-0100, 800-424-9300
Cage: 73766
Ingredients
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 65-75%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
ROSIN ACID
CAS: 8050-09-7
Fraction By Weight: 25-25%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CONTACT MAY CAUSE IRRITATION.
PROLONGED OR REPEATED CONTACT MAY CAUSE TISSUE DAMAGE. HEALTH
STUDIES HAVE SHOWN THAT POTENTIALHEALTH RISKS MAY VARY BY
INDIVIDUAL. ALWAYS MINIMIZE EXPOSURE AS A PRECAUTI ON.
Explanation of Carcinogenicity:DATA PER MSDS
Effects of Overexposure:INHALATION-HEADACHE, DIZZINESS, DIFFICULTY
BREATHING. INGESTION-NAUSEA, VOMITING. SKIN-REDNESS, BURNING, RASH,
DRYNESS. EYE-REDNESS,BURNING, TEARING, BLURRED VISION.
Medical Cond Aggravated by Exposure:SKIN ALLERGIES AND RESPIRATORY/LUNG
CONDITIONS.
First Aid
First Aid:SKIN-FLUSH WITH WATER IMMEDIATELY. WASH THOROUGHLY AND APPLY
LOTION. EYES-FLUSH WITH WATER FOR 15 MINUTES. SEEK MEDICAL
ATTENTION. INGESTION-DRINK LARGE AMOUNTS OF WATER. SEEK MEDICAL
ATTENTION. NEVER GIVE LIQUIDS TO AN UNCONSCIOUS PERSON.INHALATION-
REMOVE TO FRESH AIR. SUPPORT RESPIRATION IF REQUIRED. SEEK MEDICAL
ATTENTION.
Fire Fighting
Flash Point Method:TOC
Flash Point:52.0F,11.1C
Lower Limits:2.0
Upper Limits:12.0
Extinguishing Media:ALCOHOL FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:FLAMMABLE MATERIAL, WATER MAY SPREAD
FLAMES.
Accidental Release
Spill Release Procedures:EXTINGUISH ALL FLAMES, ELIMINATE LL SOURCES OF
IGNITION. FLUSH INTO A CHEMICAL SEWER OR SOAK UP WITH A SUITABLE
ABSORBENT.
Neutralizing Agent:NOT APPLICABLE.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:AVOID CONTACT AS MUCH AS POSSIBLE. NO SMOKING. GROUND
METALLIC CONTAINERS.
Exposure Controls
Respiratory Protection:ORGANIC VAPOR MASK FOR FUMES OVER TLV, USUALLY
DURING SOLDERING.
Ventilation:LOCAL EXHAUST PREFERRED.
Protective Gloves:PLASTIC OR RUBBER DUING SOLDERING.
Eye Protection:GOGGLES OR FACE SHIELD DURING SOLDERING.
Other Protective Equipment:AS REQUIRED TO AVOID CONTACT.
Work Hygienic Practices:FOLLOW GOOD INDUSTRIAL HYGIENE PRACTICES.
Supplemental Safety and Health
DOT HAZARD CLASSIFICATION: FLAMMABLE LIQUID, ISOPROPYL ALCOHOL.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:181F,83C
Vapor Pres:33
Vapor Density:2.7
Spec Gravity:0.850-0.885
Evaporation Rate & Reference:1.7 (N-BUTYL ACETATE = 1)
Solubility in Water:APPRECIABLE
Appearance and Odor:AMBER LIQUID, ALCOHOL ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
HYDROCARBONS.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE
AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.