BRMXR - ACRYMET PLUS

  • MSDS: BRMXR
  • Manufacturer: CANTOL INC
  • Product Name: ACRYMET PLUS
  • National Stock Number: 6850-00N039998
Product Identification

Product ID:ACRYMET PLUS
MSDS Date:09/15/1992
FSC:6850
NIIN:00N039998
MSDS Number: BRMXR

Responsible Party
CANTOL INC
2211 NORTH AMERICAN ST
PHILADELPHIA, PA 19133
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 215-425-1966

Preparer: RICHARD J. PETSCHE

Cage: HO278

Contractor
CANTOL,INC.
PHILADELPHIA, PA 19133-3306 US

Telephone: 215-425-1966

Cage: 58380

Ingredients

ACRYLATE COPOLYMER

CAS: 63744-68-3

Fraction By Weight: >1%


ETHANOL, 2-(2-METHOXYETHOXY)-; (DIETHYLENE GLYCOL METHYL

CAS: 111-77-3

RTECS: KL6125000

Fraction By Weight: 4%


ZINC OXIDE (COMPLEX)

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 0.4%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293


AMMONIUM HYDROXIDE

CAS: 1336-21-6

RTECS: BQ9625000

Fraction By Weight: 0.8%

OSHA PEL 50 PPM (MFR)

ACGIH TLV: 25 PPM (MFR)

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CAUSES EYE IRRITATION. INGEST:
IRRITATES DIGESTIVE TRACT. SKIN: PROLONGED CONTACT MAY CAUSE
IRRITATION. CHRONIC: NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:EYES: REDNESS. SKIN: REDNESS. INGEST: DIARRHEA.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:EYES: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
SEEK PROMPT MEDICAL ATTENTION. INGEST: DRINK LARGE QTY OF WATER.
CALL A PHYSICIAN . SKIN: FLUSH WITH WATER. INHAL: REMOVE TO FRESH
AIR. SUPPOR T BRTHG (GIVE O*2/ARTF RESP) .

Fire Fighting

Flash Point Method:TCC
Flash Point:NONE
Extinguishing Media:WATER, FOAM, CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL
FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . TOXIC GASES MAY BE RELEASED.
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:SOAK UP SPILL WITH OIL ABSORBANT. REMOVE
RESIDUE WITH WATER AND DETERGENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP FROM FREEZING. KEEP OUT OF REACH
OF CHILDRFEN.
Other Precautions:FOR INDUSTRIAL AND INSTITUTIONAL USE ONLY. READ AND
FOLLOW ALL LABEL DIRECTIONS AND PRECAUTIONS BEFORE USING. DO NOT
MIX WITH ANY OTHER CHEMICALS.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE.
Protective Gloves:RUBBER, NEOPRENE, PLASTIC.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
Vapor Density:>1
Spec Gravity:1.012(H*2O=1)
Evaporation Rate & Reference:>1(BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:OFF-WHITE MILKY EMULSION WITH A MILD ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, AND OXIDIZERS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:BURNING MAY YIELD TOXIC CHEMICALS.

Disposal

Waste Disposal Methods:DISCARD USED ABSORBANT IN TRASH CONTAINER. THIS
MATERIAL IS NOT AN EPA-RCRA HAZARDOUS WASTE. FOLLOW FEDERAL, STATE
AND LOCAL DISPOSAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.