BRQVY - AMBERLITE IRC-718 RESIN, 69609

  • MSDS: BRQVY
  • Manufacturer: ROHM AND HAAS CO
  • Product Name: AMBERLITE IRC-718 RESIN, 69609
  • National Stock Number: 6810-00N040026
Product Identification

Product ID:AMBERLITE IRC-718 RESIN, 69609
MSDS Date:02/21/1991
FSC:6810
NIIN:00N040026
MSDS Number: BRQVY

Responsible Party
ROHM AND HAAS CO
INDEPENDENCE MALL WEST
PHILADELPHIA, PA 19105
US

Emergency Phone: 215-592-3000;800-424-9300(CHEMTREC)

Info Phone: 215-592-3000

Cage: 77902

Contractor
ROHM AND HAAS CO
PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

Ingredients

NON-HAZARDOUS INGREDIENT; (STRONG ACID CATION EXCHANGE

Fraction By Weight: 28-36%

OSHA PEL N/K

ACGIH TLV: N/K


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 64-72%

OSHA PEL N/K

ACGIH TLV: N/K


HYGIENISTS FOR INFORMATION ON THE DESIGN,

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: MATERIAL CAN CAUSE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE: FLUSH EYES WITH A LARGE AMOUNT OF WATER FOR AT LEAST 15
MIN. CONSULT A PHYSICIAN IF IRRITATION PERSISTS. SKIN: FLUSH WITH
COPIOUS AMOUNTS OF WATER. CALL MD . INHAL: REMOVE TO FRESH AIR. SUP
PORT BREATHING (GIVE O*2/ARTF RESP). INGEST: GET MD IMMEDIATELY .

Fire Fighting

Extinguishing Media:USE THE FOLLOWING EXTING MEDIA WHEN FIGHTING FIRES
INVOLVING THIS MATERIAL: CARBON DIOXIDE, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:WEAR GLOVES MADE OF COTTON OR CANVAS.
ADDITIONAL PERSONAL PROTECTIVE EQUIPMENT INCLUDES SAFETY GLASSES
(ANSI Z87.1 OR EQUIVALENT). FLOOR MAY BE SLIPPERY; USE CARE TO
AVOID FALLING. TRANSFER SPILLED MA TL TO SUITABLE CNTNRS FOR
RECOVERY OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE AT 0C/32F (MIN), 60C/140F (MAX).
KEEP FROM FREEZING; MATERIAL STABILITY MAY BE AFFECTED. THE MAX
RECOMMENDED OPERATING TEMP IS 150C/300F.
Other Precautions:PROPERLY DESIGNED EQUIP IS VITAL IF THESE ION
EXCHANGE RESINS ARE TO BE USED IN CONJUNCTION W/STRONG OXIDIZING
AGENTS SUCH AS NITRIC ACID TO PVNT A RAPID BUILD-UP OF PRESSURE AND
POSSIBLE EXPLOSION. C ONSULT A SOURCE KNOWLEDGEABLE(SUPP DATA)

Exposure Controls

Respiratory Protection:A RESP PROT PROGRAM MEETING OSHA 1910.134 & ANSI
Z88.2 REQUIREMENTS MUST BE FOLLOWED WHENEVER WORKPLACE CNDTNS
WARRANT A RESP'S USE. NONE REQUIRED UNDER NORMAL OPERATING CNDTNS.
NIOSH/MSHA APPRVD RESP APPROP FOR EXPOS OF CONCERN .
Ventilation:VENT SYS EMPLOYED IS DEPENDENT ON THE USER'S SPECIFIC
APPLICATION OF THIS MATL. REFER TO THE CURRENT EDITION (SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:FACILITIES STORING OR UTILIZING THIS
MATERIAL SHOULD BE EQUIPPED WITH AN EYEWASH FACILITY.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH: 5-7 AQUEOUS SLURRY. OTHER PREC: IN THE HNDLG OF THESE MATLS BEFORE
PRECEDING. DO NOT PACK COLUMN W/DRY ION EXCHANGE RESINS. DRY BEADS
EXPAND WHEN WETTED; THIS EXPANSION CAN CAUSE GLASS COLUMNS TO
SHATTER. VENT:OF INDUST VENT: A MANUAL OF RECOM PRAT PUBLISHED BY
THE AMERICAN CONFERENCE OF GOVERNMENTAL INDUST(ING 3)

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32F,0.0C
Vapor Pres:17 @ 20C
Vapor Density:< 1
Spec Gravity:1.14 (H*2O=1)
pH:SUPDAT
Evaporation Rate & Reference:< 1 (BU AC=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:TAN BEADS, ODORLESS.
Percent Volatiles by Volume:64-72

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS, PARTICULARLY CONCENTRATED
NITRIC ACID.
Stability Condition to Avoid:AVOID TEMPERATURES ABOVE 200C/392F.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD THE
FOLLOWING: MONOMER VAPORS.

Disposal

Waste Disposal Methods:UNUSED RESIN MAY BE INCINERATED OR LANDFILLED IN
FACILITIES MEETING LOCAL, STATE, AND FEDERAL REGS. FOR CONTAMINATED
RESIN, THE USER MUST DETERMINE THE HAZARD AND USE AN APPROPRIATE
DISPOSAL METHOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.