BRRGX - ALUMINUM, 5554
- MSDS: BRRGX
- Manufacturer: THERMACOTE WELCO
- Product Name: ALUMINUM, 5554
- National Stock Number: 3439-00N043412
Product Identification
Product ID:ALUMINUM, 5554
MSDS Date:05/22/1991
FSC:3439
NIIN:00N043412
MSDS Number: BRRGX
Responsible Party
KINGS MOUNTAIN, NC 28086
US
Emergency Phone: 704-739-6421
Info Phone: 704-739-6421
Cage: 0AES5
Contractor
Cage: 0AES5
Ingredients
MANGANESE
CAS: 7439-96-5
OSHA PEL (C) 5 MG/M3 DUST
ACGIH TLV: 5 MG/M3 DUST 9293
SILICON
CAS: 7440-21-3
RTECS: VW0400000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
SILVER (SARA III)
CAS: 7440-22-4
RTECS: VW3500000
OSHA PEL 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
TIN
CAS: 7440-31-5
RTECS: XP7320000
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
ZINC OXIDE; (ZINC)
CAS: 1314-13-2
RTECS: ZH4810000
OSHA PEL 15MG/M3 TDUST/5 FUME
ACGIH TLV: 10MG/M3 TDUST; 9293
CHROMIUM (SARA III)
CAS: 7440-47-3
RTECS: GB4200000
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
AMMONIUM NITRATE COULD CAUSE EXPLO. THIS APPLIES TO
RTECS: 9999999ZZ
MOISTURE MUST BE DRIVEN OFF PRIOR TO REMELTING.
RTECS: 9999999ZZ
HARD ALLOY INGOTS IN 2000 & 7000 SERIES MUST BE
RTECS: 9999999ZZ
WHEN SAWED. WELDING OF ALUMINUM ALLOYS MAY GENERATE
RTECS: 9999999ZZ
UV RADIA, IN ADDN TO METAL FUMES. SOME ALUMINUM
RTECS: 9999999ZZ
ALUMINUM SCRAP MAY GENERATE OIL VAPS WHICH ARE IRRIT
RTECS: 9999999ZZ
CAUSE SKIN IRRIT. VAP DEGREASER MUST BE PROPERLY
RTECS: 9999999ZZ
IN FIRE OR EXPLOSION.
RTECS: 9999999ZZ
PROCESSING ACTIVITY BEING PERFORMED.
RTECS: 9999999ZZ
ALUMINUM; (BASE METAL ALUMINUM) (SARA III)
CAS: 7429-90-5
RTECS: BD0330000
OSHA PEL 15MG/M3 DUST; 5 FUME
ACGIH TLV: 10 MG/M3 DUST
COBALT (SARA III)
CAS: 7440-48-4
RTECS: GF8750000
OSHA PEL 0.1 MG/M3;AS CO
ACGIH TLV: 0.05 MG/M3;DUST 9293
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
OSHA PEL 0.1MG/M3 FUME;1 DUST
ACGIH TLV: 0.2MG/M3 FUME;1 DUST
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
IRON (III) OXIDE; (IRON OXIDE) (IRON)
CAS: 1309-37-1
RTECS: NO7400000
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
MAGNESIUM OXIDE; (MAGNESIUM)
CAS: 1309-48-4
RTECS: OM3850000
OSHA PEL 15 MG/M3 PARTICULATE
ACGIH TLV: 10 MG/M3;TDUST; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES:MAY IRRITATE EYES WHEN
WELDING/PLASMA CUTTING. INHALATION IS NOT LIKELY UNLESS MATERIAL
MACHINED, WELDED, OR REMELTED. EXPOSURE TO ZINC OXIDE FUME CAN
RESULT IN "ZINC CHILLS" (METAL FUME FEVER). RECOVERY IS USUALLY
COMPLETE IN 24-48 HOURS. OVEREXPOSURE TO COPPER FUME CAN CAUSE
UPPER RESPIRATORY TRACT IRRITATION.
Explanation of Carcinogenicity:COBALT:IARC MONOGRAPHS ON EVALUATION OF
CARCIN RISK OF CHEM TO MAN, VOL 52, PG 363, 1991.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGESTION: CALL MD IMMEDIATELY . SKIN: REMOVE PARTICLES BY
THOROUGHLY WASHING WITH SOAP AND WATER. EYES: FLUSH WITH WATER FOR
AT LEAST 15 MINUTES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS.
I NHALATION: REMOVE FROM EXPOSURE. GET MEDICAL ATTENTION IF
EXPERIENCING BREATHING DIFFICULTY.
Fire Fighting
Extinguishing Media:DRY POWDER OR SAND.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . DO NOT USE WATER OR HALOGEN ON DUST FUMES.
Unusual Fire/Explosion Hazard:DAMP ALUMINUM DUST MAY SPONTANEOUSLY HEAT
WITH LIBERATION OF HYDROGEN TO FORM EXPLOSIVE AIR MIXTURES.
Accidental Release
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:HALOGEN ACID & SODIUM HYDROXIDE IN
CNTCT W/ ALUMINUM MAY GENERATE EXPLO MIX IN AIR IN PRESENCE OF
BROMATES, IODATES/ AMMONIUM NITRITE. FINELY (SUPDAT)
Other Precautions:DO NOT TOUCH CAST ALUMINUM METAL/HEATED ALUMINUM PROD
W/OUT KNOWING METAL TEMP. ALUMINUM EXPERIENCES NO COLOR CHG DURING
HEAT. IF METAL IS HOT & TOUCHED, BURNS CAN RSLT. ALUMINUM PWDR MUST
BE PACKAGED & SHIPPED A FLAM SOLID UN1396. (ING 14)
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . DETERMINED BY THE NATURE OF THE
PROCESSING ACTIVITY.
Ventilation:TO BE DETERMINED BY THE NATURE OF THE PROCESSING ACTIVITY
BEING PERFORMED.
Protective Gloves:TO BE DETERMINED BY NATURE OF (ING 20)
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT IS
REQUIRED WHEN MELTING, CASTING, MACHINING, FORGING OR OTHERWISE
PROCESSING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLAN OF CARCIN: NTP 6TH ANNUAL REPORT ON CARCIN, 1991:KNOWN TO BE
CARCIN. HNDLG/STOR PREC:DIVIDED ALUMINUM WILL FORM EXPLO MIX IN
AIR. WILL ALSO FORM EXPLO MIX W/HYDROGEN. WHEN REMELTING ALUMINUM
SC RAP, ENTRAPPED MOISTURE/PRESENCE OF STRONG OXIDIZERS SUCH AS
(ING 12)
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>950F,>510C
Spec Gravity:2.5-2.9
Solubility in Water:NIL
Appearance and Odor:METALLIC APPEARANCE, NO ODOR.
Disposal
Waste Disposal Methods:USED OR UNUSED PRODUCT SHOULD BE TESTED TO
DETERMINE HAZARD STATUS AND DISPOSAL REQUIREMENTS UNDER FEDERAL,
STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.