BRRRF - POLYMER, 1160XL
- MSDS: BRRRF
- Manufacturer: BETZ LABORATORIES INC
- Product Name: POLYMER, 1160XL
- National Stock Number: 6850-00N016202
Product Identification
Product ID:POLYMER, 1160XL
MSDS Date:08/09/1989
FSC:6850
NIIN:00N016202
MSDS Number: BRRRF
Responsible Party
TREVOSE, PA 19053
US
Emergency Phone: 215-355-3300
Info Phone: 215-355-3300
Cage: 24774
Contractor
Telephone: 215-355-3300
Cage: 24774
Ingredients
HYDROTREATED LIGHT PETROLEUM DISTILLATE
CAS: 64742-47-8
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN:MODERATELY IRRITATING. MAY
CAUSE DERMATITIS. EYES:MODERATELY IRRITATING. INHAL:VAPORS, GASES,
MISTS &/OR AEROSOLS MAY CAUSE IRRITATION TO UPPER RESPIRATORY
TRACT. CHRONIC: PROLONGED OR REP EATED EXPOSURE MAY CAUSE CNS
DEPRESSION. MAY CAUSE DEFATTING-TYPE DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:EXCESSIVE DERMAL EXPOSURE CAUSES DEFATTING &
DRYING OF SKIN. EXCESSIVE INHALATION OF VAPORS CAUSES DIZZINESS,
HEADACHE & NAUSEA.
Medical Cond Aggravated by Exposure:NOT KNOWN.
First Aid
First Aid:SKIN:REMOVE CONTAMD CLTHG. WASH EXPOSED AREA W/LGE QTY OF
SOAP SOLN OR WATER FOR 15 MINS. EYES:IMMED FLUSH W/WATER FOR AT
LEAST 15 MINS. IMMED CONT A MD FOR ADDNL TREATMENT. INHAL:REMOVE
VICTIM FROM C ONTAMD AREA TO FRESH AIR. APPLY APPROP FIRST AID
TREATMENT AS NEC. INGEST:DO NOT FEED ANYTHING BY MOUTH TO AN UNCON
OR CONVULSIVE VICTIM. DO NOT INDUCE VOM. IMMED CONT MD. DILUTE
CONTENTS (SUPP DATA)
Fire Fighting
Flash Point Method:PMCC
Flash Point:>200F,>93C
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM OR WATER. IN
SLIPPERY CONDITIONS, USE SAND OR GRIT.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:VENT AREA. USE SPECIFIED PROT EQUIP.
CONTAIN/ABSORB ON ABSORB MATL. PLACE IN WASTE DISP CONTR. WASTE
CHARACT OF ABSORBED MATL, OR ANY CONTAMD SOIL, SHOULD BE DETERMINED
I/A/W RCRA REGS. FLUSH AREA W/W ATER. WET AREA MAY BE SLIPPERY.
SPREAD SAND/GRIT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP DRUM & PAILS CLOSED WHEN NOT IN
USE. STORE IN COOL, DRY LOCATION AWAY FROM ACIDS & ALKALIES. NORMAL
CHEMICAL HANDLING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NISOH/MSHA APPRVD RESPIRATORS W/IN USE
LIMITATIONS OR ELSE USE NIOSH/MSHA APPRVD SUPPLIED AIR RESPIRATORS.
IF VENT IS INADEQ OR SIGNIFICANT PRODUCT EXPOSURE IS LIKELY, USE A
NIOSH/MSHA APPROVED RE SPIRATOR W/ORGANIC VAPOR CARTRIDGES.
Ventilation:ADEQUATE VENTILATION TO MAINTAIN AIR CONTAMINANTS BELOW
EXPOSURE LIMITS.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE PROTECTIVE EQUIPMENT I/A/W 29 CFR
1910.132-134.
Work Hygienic Practices:IMMED REMOVE CONTAMD CLTHG; WASH BEFORE REUSE.
WASH GLOVES AFTER EACH USE; REPLACE AS NECESSARY.
Supplemental Safety and Health
FIRST AID PROC:OF STOMACH USING 3-4 GLASSES OF MILK OR WATER. WASTE
DISP METH:STATE & LOCAL REGULATIONS .
Chemical Properties
HCC:C3
Vapor Pres:19
Vapor Density:>1
Spec Gravity:1.105 @ 70F
pH:4.6
Solubility in Water:1%
Appearance and Odor:WHITE EMULSTION; HYDROCARBON ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
MAY REACT W/STRONG OXIDIZERS.
Stability Condition to Avoid:DO NOT CONTAMINATE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION (DESTRUCTIVE
FIRES) YIELDS ELEMENTAL OXIDES.
Disposal
Waste Disposal Methods:WATER CONTAMD W/PROD MAY BE SENT TO SANITARY
SEWER TREATMENT FACILITY, I/A/W ANY LOC AGREEMENT, A PERMITTED
WASTE TREATMENT FACILITY OR DISCHARGED UNDER A NPDES PERMIT. PROD
(AS IS):INCIN OR BURY IN A PPRVD LANDFILL. DISP MUST BE I/A/W
FED,(SUP DAT)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.