BRVXH - S-215 EPOXY ADHESIVE PART A
- MSDS: BRVXH
- Manufacturer: ARMSTRONG WORLD INDUSTRIES INC
- Product Name: S-215 EPOXY ADHESIVE PART A
- National Stock Number: 8040-00F029276
Product Identification
Product ID:S-215 EPOXY ADHESIVE PART A
MSDS Date:07/01/1991
FSC:8040
NIIN:00F029276
Kit Part:Y
MSDS Number: BRVXH
Responsible Party
LANCASTER, PA 17604
US
Emergency Phone: 717-396-2348/2328/2935
Info Phone: 717-396-2348/2328/2935
Cage: 03938
Contractor
Telephone: 717-396-2328; 717-396-2935
Cage: 03938
Ingredients
BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820,
CAS: 25068-38-6
RTECS: KD4380000
Fraction By Weight: 45-55%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE ALLERGIC SKIN REACTION.
REPEATED EXPOSURE MAY CAUSE SKIN IRRITATION. EYES: SHORT TRANSIENT
& IRRITATION. INHALATION: RESPIRATORY TRACT IRRITATION.
Explanation of Carcinogenicity:NONE
Medical Cond Aggravated by Exposure:EXISTING SKIN CONDITIONS & ANY
MEDICAL CONDITION THAT MAY BE AGGRAVATED BY PULMONARY IRRITANT.
First Aid
First Aid:SKIN: WASH W/SOAP & WATER OR WATERLESS SKIN CLEANSER FOLLOWED
BY SOAP & WATER. EYES: FLUSH W/WATER FOR 15 MIN. INHALATION: REMOVE
TO FRESH AIR & PROVIDE OXYGEN IF BREATHING IS DIFFICULT. INGESTION:
DO N'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TOC
Flash Point:465-490F
Accidental Release
Spill Release Procedures:SCRAPE INTO CONTAINERS FOR DISPOSAL.
Handling
Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
CONTAINER TIGHTLY CLOSED. STORE IN A COOL, DRY PLACE.
Exposure Controls
Ventilation:GOOD GENERAL/LOCAL VENTILATION.
Protective Gloves:PROTECTIVE
Eye Protection:CHEMICAL GOGGLES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH W/SOAP & WATER BEFORE EATING/DRINKING/SMOKING/TOILET
FACILITIES.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:1.45
Solubility in Water:INSOLUBLE
Appearance and Odor:GRAYISH-WHITE MEDIUM PASTE W/SLIGHT PETROLEUM ODOR.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:CO, ALDEHYDES, & ACIDS FROM INCOMPLETE
COMBUSTION
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. CAN BE INCINERATED IN APPROVED FACILITY IF NOT
IN CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.