Product ID:562 ETCH-LOC ETCHING FILLER, NEUTRAL GREEN
MSDS Date:04/01/1991
FSC:8010
NIIN:00F029519
MSDS Number: BRWML

ACME AUTOMOTIVE FINISHES

101 PROSPECT AVE NW
CLEVELAND, OH 44115
US

Emergency Phone: 216-566-2917

Info Phone: 216-566-2902

Cage: ACMEA

ACME AUTOMOTIVE FINISHES

CLEVELAND, OH 44115 US

Telephone: 216-566-2917

Cage: ACMEA

ISOPROPYL ACETATE

CAS: 108-21-4

RTECS: AI4930000

Fraction By Weight: 3%

OSHA PEL 250 PPM

ACGIH TLV: 1040 MG/CUM

TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 10-15%

OSHA PEL 20 MPPCF

ACGIH TLV: 2 MG/CUM (RESP DUST)

TITANIUM DIOXIDE, TIO2

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

BASIC ZINC CHROMATE (HUMAN CARCINOGEN BY NTP/IARC/OSHA)

CAS: 50922-29-7

RTECS: GB3295000

Fraction By Weight: 6%

OSHA PEL 0.1 MG/CUM

ACGIH TLV: 0.05 MG/CUM (A1)

8.84

RTECS: 9999999WG

5.42

RTECS: 9999999VO

DIBUTYL PHTHALATE, DI-N-BUTYL PHTHALATE

CAS: 84-74-2

RTECS: TI0875000

Fraction By Weight: 1-5%

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

HEXONE, METHYL ISOBUTYL KETONE (MIBK), 4-METHYL-2-PENTANONE

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 9%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TOLUENE

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

XYLENE, DIMETHYLBENZENE, XYLOL

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 4%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ETHANOL (ETHYL ALCOHOL), TECSOL, ALCOHOL

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 1-10%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM

ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 27%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM

2-BUTOXYETHANOL (ETHYLENEGLYCOL MONOBUTYL ETHER), BUTYL

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 10%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:EYE, SKIN, OR RESPIRATORY IRRITANT.
NERVOUS SYSTEM DEPRESSION. OVEREXPOSURE TO SOLVENTS MAY CAUSE DEATH
PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE & ADVERSE EFFECTS TO THE
LIVER, URINARY, BLOOD-FORMING, CARDIO-VASCULAR SYSTEMS.
.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:INHALATION: HEADACHE, DIZZINESS, NAUSEA, LOSS
OF COORDINATION, UNCONSCIOUSNESS, DEATH. EYES/SKIN: REDNESS,
ITCHING OR BURNING SENSATION.

First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. KEEP WARM
& QUIET. SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/PLENTY OF WATER
FOR 15 MINS. INGESTION: OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:48F
Lower Limits:0.7%
Upper Limits:12.7%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:USE FULL PROTECTIVE EQUIP & SCBA. WATER SPRAY
MAY BE INEFFECTIVE. IF WATER IS USED, FOG NOZZLES ARE PREFERABLE.
USE WATER TO COOL FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. APPLICATION TO HOT SURFACES REQUIRES
SPECIAL PRECAUTIONS.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AND
REMOVE WITH INERT ABSORBENT.

Handling and Storage Precautions:KEEP AWAY FROM IGNITION SOURCES.
DURING USE & UNTIL ALL VAPORS ARE GONE: KEEP AREA VENTILATED. DON'T
SMOKE. CONSULT NFPA CODE. DON'T TAKE INTERNALLY.
Other Precautions:USE APPROVED BONDING & GROUNDING PROCEDURES. KEEP
CONTAINER CLOSED WHEN NOT IN USE. TRANSFER ONLY TO APPROVED
CONTAINERS W/COMPLETE LABELING. KEEP OUT OF REACH OF CHILDREN.
AVOID BREATHING VAPORS/SPRA Y MIST/CONTACT W/SKIN & EYES.

Respiratory Protection:IF PERSONAL EXPOSURE CANNOT BE CONTROLLED BELOW
TLV, USE A PROPERLY FITTED ORGANIC VAPOR/PARTICULATE RESPIRATOR
APPROVED BY NIOSH/MSHA. WHEN
SANDING/WIREBRUSHING/ABRADING/BURNING/WELDING DRIED FILM, U SE A
NIOSH/MSHA PARTICULATE RESPIRATOR.
Ventilation:LOCAL EXHAUST: PREFERABLE. GENERAL EXHAUST: ACCEPTABLE IF
THE EXPOSURE TO HAZARDOUS INGREDIENTS IS KEPT BELOW TLV.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES W/UNPERFORATED SIDESHIELD
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS AFTER USING.
Supplemental Safety and Health
CON'T: WASTE FROM PRODUCT CONTAINING CHROMIUM MUST BE TESTED FOR
EXTRACTABILITY. COATING MAY CONTAIN MATERIALS CLASSIFIED AS
NUISANCE PARTICULATESK WHICH MAY BE PRESENT WHEN SANDING/ABRADING
DRIED FIL M.

Boiling Pt:B.P. Text:132-384F
Vapor Density:>1
Spec Gravity:0.81-1.1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:74-99

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME OR OTHER IGNITION
SOURCES.
Hazardous Decomposition Products:BY FIRE: CO2, CO & OXIDES OF METALS IN
PRODUCT

Waste Disposal Methods:WASTE MAY BE HAZARDOUS UNDER THE RCRA. TEST
WASTE FOR IGNITABILITY TO DETERMINE THE APPLICABLE EPA HAZARDOUS
WASTE NUMBERS. INCINERATE IN APPROVED FACILITY. DON'T INCINERATE
CLOSED CONTAINER. DISPOSE OF ACCORDING W/LOCAL, STATE & FED
REGS.SEE SUPP.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.