BRXFQ - 9544 CORRSOION INHIBITOR

Product Identification

Product ID:9544 CORRSOION INHIBITOR
MSDS Date:07/07/1988
FSC:6850
NIIN:00F029828
MSDS Number: BRXFQ

Responsible Party
SELIG CHEMICAL INDUSTRIES INC
840 SELIG DR SW
ATLANTA, GA 30301
US

Emergency Phone: 404-691-9292

Info Phone: 404-691-9292

Cage: 86938

Contractor
SELIG CHEMICAL INDUS, DIV OF NATIONAL SERVICE INDUS
ATLANTA, GA 30378 US

Telephone: 404-691-9220

Cage: 86938

Ingredients

NON-HAZARDOUS FOR INGREDIENTS

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION. INHALATION:
SLIGHT EFFECT SINCE LOW VOLATILITY. INGESTION: IRRITATING TO
THROAT & STOMACH. HARMFUL IF SWALLOWED.
Explanation of Carcinogenicity:NONE

First Aid

First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/PLENTY OF WATER FOR
15 MINS. INHALATION: REMOVE TO FRESH AIR. INGESTION: RINSE MOUTH &
GIVE PLENTY OF WATER TO DRINK. INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:NONE
Unusual Fire/Explosion Hazard:CONTAINER MAY BURST WHEN HEATED ABOVE
120F.

Accidental Release

Spill Release Procedures:ABSORB SPILL W/AN ABSORBENT MATERIAL. PICK UP
& DEPOSIT IN A SEALABLE CONTAINER FOR DISPOSAL AS A HAZARDOUS
WASTE. THOROUGHLY CLEAN AREA W/A DETERGEMT SOLUTION. RINSE AREA
THOROUGHLY W/CLEAN WATER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. AVOID CONTACT W/SKIN,
EYES & BREATHING OF VAPORS. DON'T INGEST.

Exposure Controls

Ventilation:PROVIDE GOOD VENTILATION
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:RUBBER APRON
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:212F
Spec Gravity:1.036
pH:9.6
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR PINK LIQUID, ODORLESS.
Percent Volatiles by Volume:97.76%

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FREEZING TEMPERATURES

Disposal

Waste Disposal Methods:UNUSED PRODUCT MAY HAVE TO BE ABSORBED ON AN
INERT MATERIAL & DISPOSED OF AS HAZARDOUS WASTE. DISPOSE OF IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.