BRZFX - WONDER-SPEED INTERIOR LATEX FLAT WALL PAINT

  • MSDS: BRZFX
  • Manufacturer: AMERITONE PAINT CORP
  • Product Name: WONDER-SPEED INTERIOR LATEX FLAT WALL PAINT
  • National Stock Number: 8010-00N016798
Product Identification

Product ID:WONDER-SPEED INTERIOR LATEX FLAT WALL PAINT
MSDS Date:11/20/1987
FSC:8010
NIIN:00N016798
MSDS Number: BRZFX

Responsible Party
AMERITONE PAINT CORPORATION
18414 S SANTA FE AVENUE
COMPTON, CA 90221
US

Emergency Phone: 213-639-6791

Info Phone: 213-639-6791

Cage: FO133

Contractor
AMERITONE PAINT CORP/COMPTON, CA 90221
190 LONG BEACH, CA 90801 US

Telephone: 310-639-6791

Cage: FO133

Ingredients

CLAY (KAOLIN); (ALUMINUM SILICATE)

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293


11.9 @ 68F.

CAS: 1336-21-6

RTECS: BQ9625000

Fraction By Weight: <1%

OSHA PEL 50 PPM (MFR)

ACGIH TLV: 25 PPM (MFR)

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PROPIONIC ACID, 2-METHYL-, MONOESTER WITH

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: <5%


TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


CALCIUM CARBONATE

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 10-20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


DIATOMACEOUS EARTH, FLUX CALCINED

CAS: 68855-54-9

Fraction By Weight: 5%

ACGIH TLV: 0.08 MG/M3TDUST(MFR)


PALYGORSKITE; (ATTAPULGITE CLAY)

CAS: 12174-11-7

RTECS: RT6400000

Fraction By Weight: <1%


145-147 GM/LTR

RTECS: 9999999VO


DECOMPOSITION PRODUCTS DURING WELDING AND FLAME

RTECS: 9999999ZZ


DUST. WHEN USED IN RESTRICTED VENT AREAS WEAR

RTECS: 9999999ZZ


COMBINATION OF PARTICULATES & VAP.WHEN USED IN

RTECS: 9999999ZZ


USE NIOSH/MSHA APPRVD RESP WHEN FLAME CUTTING,

RTECS: 9999999ZZ


RESPIRATOR MANUFACTURER'S DIRECTIONS FOR RESPIRATOR

RTECS: 9999999ZZ


3.2%.

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: <5%

OSHA PEL 50 PPM, C

ACGIH TLV: 50 PPM, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


MERCURY, (ACETATO) PHENYL-; (PHENYLMERCURIC ACETATE) (SARA

CAS: 62-38-4

RTECS: OV6475000

Fraction By Weight: <1%

OSHA PEL 0.1 MG/M3, C (HG)

ACGIH TLV: 0.01 MG/M3 (HG)

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: IRRITATION OF
RESPIRATORY TRACT, HEADACHE, NAUSEA, DIZZINESS. SKIN OR EYE:
PRIMARY IRRITATION. CHRONIC: PROLONGED AND REPEATED BREATHING OF
SPRAY MIST AND/OR SANDING DUST OVER PERIO D OF YEARS MAY CAUSE DUST
DISEASE OF LUNGS. NOTE: MERCURY COMPOUNDS (7439-97-6) APPEAR ON
NAVY LISTING (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: OF OCCUPATIONAL CHEMICAL
REPRODUCTIVE HAZARDS. SEEK CONSULTATION FROM APPROPRIATE HEALTH
PROFESSIONALS CONCERNING LATEST HAZARD LIST INFORMATION AND SAFE
HANDLING AND EXPOSURE RECOMMEN DATIONS .
Medical Cond Aggravated by Exposure:NONE WHEN USED IN ACCORDANCE WITH
SAFE HANDLING AND USE INFORMATION.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH IMMEDIATELY WITH
LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. CONSULT PHYSICIAN
FOR MEDICAL TREATMENT. SKIN: REMOVE WITH SOAP AND WATER. REMOVE
SOILED C LOTHING. INGESTION: DRINK 1 OR 2 GLASSES OF WATER TO
DILUTE. DO NOT INDUCE VOMITING. CONSULT PHYSICIAN IMMEDIATELY.
TREAT SYMPTOMATICALLY.

Fire Fighting

Flash Point:NONE
Lower Limits:SEE INGS
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL FOAM OR OTHER NFPA
APPROVED METHOD FOR TREATING CLASS B FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
EQUIP.SUMMON PROFESSIONAL FIREFIGHTERS. WATER SPRAY MAY BE INEFT.IF
WATER USED,FOG NOZZ ARE PREF.IF EXPOS (SUPDAT)
Unusual Fire/Explosion Hazard:DUE TO PRESS BUILD-UP, CLSD CNTNRS EXPOS
TO EXTREME HEAT MAY EXPLO. DURING EMER CNDTNS, OVEREXP TO DECOMP
PRODS MAY CAUSE HLTH HAZ. SYMPS MAY NOT BE (SUPDAT)

Accidental Release

Spill Release Procedures:WASH WITH WATER. BEFORE ATTEMPTING CLEAN-UP,
REFER TO HAZARD CAUTION INFORMATION IN OTHER SECTIONS OF MSDS FORM.
CONTAIN SPILLED MATERIAL AND REMOVE WITH INERT ABSORBENT. STORE IN
CLOSED CONTAINER UNT IL PROPERLY DISPOSED OF.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE BELOW 110F AND KEEP FROM
FREEZING. KEEP CONTAINER CLOSED WHEN NOT IN USE. DO NOT REUSE EMPTY
CONTAINERS.
Other Precautions:DO NOT TRANSFER CONTENTS TO BOTTLES OR OTHER
UNLABELLED CONTAINERS. KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:DO NOT BRTH VAPS, SPRAY MIST/SANDING DUST. WHEN
SPRAY APPLIED IN OUTDOOR/OPEN AREAS W/UNRESTRICTED VENT,& DURING
SANDING/GRINDING OPER,USE NIOSH/MSHA APPRVD MECH FILTER RESP TO
REMOVE SOLID AIRBORNE P ARTICLES OF OVERSPRAY & SANDING (ING 12)
Ventilation:USE ONLY W/ADEQ VENT. PROVIDE GEN DILUTION/LOC EXHST VENT
IN VOL & PATTERN TO KEEP AIR CONTAM CONC BELOW CURRENT(SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE RQUIRED.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING, SMOKING OR USING WASHROOM.
Supplemental Safety and Health
VAP DENS: HVR/AIR; LTR/AIR (AMMONIA & H*2O). FIRE FIGHT PROC:TO
FIRE/EXTREME HEAT, WATER SHOULD BE USED TO COOL CLSD CNTNRS & PVNT
PRESS BUILD-UP OR POSS AUTOIGNIT. EXPLO HAZ:IMMED APPARENT. OBTAIN
ME D ATTN.VENT: APPLIC SAFETY & HLTH STDS IN MIX,APPLIC & CURING
AREAS & TO REMOVE SANDING DUSTS OF DRIED COATING &(ING 11)

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:SEE INGS
Vapor Density:SUPP DATA
Spec Gravity:1.35-1.41
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:69-70

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE HAZ FUMES WHEN HEATED TO
DECOMPOSITION. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.