BRZHQ - SPEEDHIDE EXT LATEX WOOD PRIMER, 6-609

  • MSDS: BRZHQ
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: SPEEDHIDE EXT LATEX WOOD PRIMER, 6-609
  • National Stock Number: 8010-00N040153
Product Identification

Product ID:SPEEDHIDE EXT LATEX WOOD PRIMER, 6-609
MSDS Date:06/05/1990
FSC:8010
NIIN:00N040153
MSDS Number: BRZHQ

Responsible Party
PPG INDUSTRIES INC
260 KAPPA DRIVE
PITTSBURG, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 800-441-9695;412-492-5555

Cage: 47695

Contractor
PPG INDUSTRIES INC
PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

Ingredients

10 MG/M3 TDUST; 5 MG/M3 RDUST

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 1-2%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293


WATER (DEIONIZED)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 40-45%


PROPIONIC ACID, 2-METHYL-, MONOESTER

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1-2%


FILM FORMERS, RESINS & ADDITIVES

Fraction By Weight: 20-25%


INGREDIENTS 9 & 10 ARE COMPONENTS OF ONE OR MORE OF THE

RTECS: 9999999ZZ


SILICA, CRYSTALLINE - CRISTOBALITE

CAS: 14464-46-1

RTECS: VV7325000

Fraction By Weight: 1-2%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.05 MG/M3 RDUST9293


SILICA, CRYSTALLINE - QUARTZ; (QUARTZ)

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 5-10%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293


WHICH IARC ASSOC W/AN INCR RISK OF CANCER IN LAB

RTECS: 9999999ZZ


ALSO LEAD TO A DISABLING INJURY KNOWN AS SILICOSIS.

RTECS: 9999999ZZ


DUST. APPLICATN OF PROD IS NOT EXPECTED TO GENERATE

RTECS: 9999999ZZ


RED, ITCH, BURNING

RTECS: 9999999ZZ


DRY, ITCH, CRACK, BURN, RED, & SWELL ARE CNDTNS

RTECS: 9999999ZZ


LEL BELOW STATED LIM, & TO REMOVE DECOMP PROD DURING

RTECS: 9999999ZZ


INGEST, EXCESSIVE EXPOS TO A CORR MATL,

RTECS: 9999999ZZ


SILICA, CRYSTALLINE-FUSED; (SILICA, AMORPHOUS-FUSED)

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: 1-2%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293


DIATOMACEOUS EARTH, FLUX CALCINED; (SILICA,

CAS: 68855-54-9

Fraction By Weight: 15-20%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3


TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL/FATAL IF
SWALLOWED. EYE: CAUSES IRRIT. SKIN: MAY CAUSE SLIGHT IRRIT. INHAL:
VAP & SPRAY MIST MAY BE HARMFUL IF INHALED.VAP GENERATED @ ELEVATED
TEMPS IRRITATES EYES, NOSE & THRO AT. SAND & GRIND DUST MAY BE
HARMFUL IFINHALED. CHRONIC: AVOID LONG TERM & RPTD CONT. PROD CNTNS
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:CRYSTALLINE SILICA: GROUP 2A,IARC
MONOGRAPH, VOL 7, P.341, 1987; ANTICIPATED TO BE CARCIN, NTP 6TH
ANNUAL RPT,1991.
Effects of Overexposure:HLTH HAZ: TITANIUM DIOXIDE. ANIMALS INHALING
MASSIVE QTY OF TITANIUM DIOXIDE DUST IN A LONG-TERM STUDY DEVELOPED
LUNG TUMORS. STUDIES W/HUMANS INVOLVED IN MFR OF PIGMENT INDICATE
NO INCR RISK OF CANCE R FROM EXPOS. POTNTL FOR INHAL OF TITANIUM
DIOXIDE DUSTS FROM COATINGS IS VERY LIM. SINCE OVEREXP ARE NOT
(SUPP DATA)

First Aid

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
WATER FOR @ LST 15 MIN. SKIN: REMOVE PROMPTLY BY WIPING, FOLLOWED
BY WATERLESS HAND CLEANER & SOAP & WATER. INHAL: REMOVE TO FRESH
AIR. APPLY ARTF RESP & OTHER SUPPORTIVE MEASURES AS REQD. OTHER:
IF ANY OF THE FOLLOWING OCCUR DURING/FOLLOWING USE OF PROD, CONT A
POIS CTL CTR, EMER ROOM/PHYS IMMED. HAVE MSDS SHEET INFO AVAIL.
(ING 17)

Fire Fighting

Flash Point Method:PMCC
Extinguishing Media:USE NATL FIRE PROT ASSOC CLASS B EXTING (CARBON
DIOXIDE, DRY CHEM/UNIVERSAL AQUEOUS FILM FORM FOAM) DESIGNED (SUPP
DATA)
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
CONTRS TO PVNT PRESS BUILD UP & (SUPP DATA)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
RESP & SKIN/EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST. VERMICULITE/OTHER
ABSORB MATL & PLACE INTO CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG QTY
IN BLDGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS IIIB
COMBUSTIBLE LIQUIDS. PROTECT FROM FREEZING.
Other Precautions:IF MATERIAL IS PART OF A MULTIPLE COMPONENT COATING
SYSTEM, READ MATERIAL SAFETY DATA SHEET(S) FOR THE OTHER COMPONENT
OR COMPONENTS BEFORE BLENDING AS RESULTING MIXTURE MAY HAVE HAZARDS
OF ALL OF ITS PARTS.

Exposure Controls

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A
NIOSH/MSHA APPROVED SUITABLE RESPIRATOR.
Ventilation:PROVIDE GEN DILUT/LOC EXHAUST VENT IN VOL & PATTERN TO KEEP
CONC OF INGRED BELOW LOWEST SUGGESTED EXPOS LIM, (ING 16)
Protective Gloves:NITRILE, NEOPRENE, OR LATEX.
Eye Protection:CHEMICAL TYPE SPASH GOGGLES.
Other Protective Equipment:PROTECTIVE CLOTHING CONSTRUCTED OF: NITRILE,
NEOPRENE OR LATEX.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA: TO EXTING NFPA CLASS IIIB COMBUST LIQ FIRES. FIRE FIGHT
PROC: POSS AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER
IS USED, FOG NOZZ ARE PREF. HAZ DECOMP: CARBON MONOXIDE, ZINC OX
IDE. EFTS OF OVEREXP: EXPECTED, THERE IS NO SIGNIFICANT HAZ FOR
MAN. PROD CNTNS A FORM OF CRYSTALLINE SILICA (ING 11)

Chemical Properties

Boiling Pt:B.P. Text:100F,38C
Vapor Pres:17.2
Vapor Density:HVR/AIR
Spec Gravity:1.25
Evaporation Rate & Reference:33(BUTYL ACETATE=1)
Solubility in Water:48.8%
Appearance and Odor:VISCOUS LIQUID W/AN ODOR CHARACT OF CHEMICAL FAMILY
Percent Volatiles by Volume:80.40

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PROD WHEN HEATED.
WELD, BRAZ/FLAME CUTTING ON SURF COATED W/PROD MAY PRDCE FUMES INCL
(SUPP DATA)

Disposal

Waste Disposal Methods:WASTE MATL MUST BE DISPOSED OF I/A/W FED, ST,
PROVINCIAL, & LOC ENVIRONMENTAL CTL REGS. EMPTY CONTRS SHOULD BE
RECYCLED OR DISPOSED OF THROUGH AN APPROVED WASTE MANAGEMENT
FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.