BSBVP - ALL ACRYLIC VYNCRYL WHT & WTB, 070-0001
- MSDS: BSBVP
- Manufacturer: DECRATREND PAINT CORP
- Product Name: ALL ACRYLIC VYNCRYL WHT & WTB, 070-0001
- National Stock Number: 8010-00N043893
Product Identification
Product ID:ALL ACRYLIC VYNCRYL WHT & WTB, 070-0001
MSDS Date:01/01/1992
FSC:8010
NIIN:00N043893
MSDS Number: BSBVP
Responsible Party
CITY OF INDUSTRY, CA 91746
US
Emergency Phone: 818-333-4592
Info Phone: 818-333-4592
Cage: 42590
Contractor
Telephone: 818-333-4592
Cage: 42590
Ingredients
0.1@68F
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 2.45%
OSHA PEL 50 PPM, C
ACGIH TLV: 50 PPM,VAPOR, C
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
DIATOMACEOUS EARTH, FLUX CALCINED; (DIATEMACEOUS EARTH)
CAS: 68855-54-9
Fraction By Weight: <5%
OSHA PEL N/K .
ACGIH TLV: N/K .
CLAY (KAOLIN); (CALCINED ALUMINUM SLILCATE)
CAS: 1332-58-7
RTECS: GF1670500
Fraction By Weight: 10%
OSHA PEL 10 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST
17@68F
Fraction By Weight: 20%
OSHA PEL N/K
ACGIH TLV: N/K
17@68F
Fraction By Weight: 10%
OSHA PEL N/K
ACGIH TLV: N/K
PROPIONIC ACID, 2-METHYL-, MONOESTER
CAS: 25265-77-4
RTECS: UF6000000
Fraction By Weight: <5%
OSHA PEL N/K
ACGIH TLV: N/K
0.97 LB/GL (117 G/L)
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE IRRIT TO SKIN, EYES,
& INTESTINAL SYS. CHRONIC: NONE KNOWN. INHAL: ADVERSE HLTH EFTS
FROM VAPS/SPRAY MISTS IN POORLY VENTILATED AREAS MAY INCLUDE IRRIT
OF MUC MEMB OF NOSE, THROAT, & RESP TRACT & SYMPS OF HDCH & NAUS.
EYES: IN DIRECT CONT, MAY CAUSE IRRIT. SKIN: PRLNGD & RPTD CONT W/
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: PROD MAY CAUSE SKIN IRRIT. SKIN
ABSORP: REDNESS, DRYING OF SKIN, OR OTHER SIGNS OF IRRITATION OR
CONTACT DERMATITIS. INGEST: CAN CAUSE GASTROINTESTINAL IRRITATION,
NAUSEA, VOMITING AND DIARR HEA.
Medical Cond Aggravated by Exposure:NONE.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. EYES: FLUSH IMMED WITH LARGE
AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. TAKE TO A PHYSICIAN FOR
MEDICAL ATTENTION. SKIN: REMOVE WITH SOAP AND WATER. REMOVE ALL
CONTAMINATED CLOTHING. INGEST: DRINK 1-2 GLASSES OF WATER TO
DILUTE. DO NOT INDUCE VOMITING. CONSULT A PHYSICIAN OR POISON
CONTROL CENTER IMMED. TREAT SYMPTOMATICALLY.
Fire Fighting
Flash Point Method:PMCC
Flash Point:241F,116C
Lower Limits:0.6%
Upper Limits:4.2%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . COOL CONTAINERS W/WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:DIKE, CONTAIN, OR ABSORB WITH INERT MATERIAL
(I.E. SAND, VERMICULITE, ETC.) TRANSFER TO CONTAINERS FOR RECOVERY
OR DISPOSAL. PREVENT RUNOFF INTO SEWERS, STREAMS, OR OTHER BODIES
OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT EXPOSE TO EXTREMES IN
TEMPERATURES. AVOID EXPOSURE TO HIGH TEMPERATURES. DO NOT ALLOW TO
FREEZE.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
EXPOSURE TO LEVELS ABOVE TLV.
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED. IF TLV IS EXCEEDED USE
NIOSH/MSHA APPROVED ORGANIC VAPOR AND MIST PROTECTION.
Ventilation:USE ADEQUATE MECHANICAL (GEN &/OR LOCAL) VENTILATION TO
MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:WEAR RESIST GLOVES SUCH AS POLYETHYLENE.
Eye Protection:ANSI APPROVED CHEM SFTY GOGG .
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING. FURNISH EYEWASH
STATIONS.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOMS.
REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:SEE INGRED
Vapor Density:LTR/AIR
Spec Gravity:1.3(H2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETELY
Appearance and Odor:TYPICAL FOR WATER BASED LATEX COATING
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CARBON
DIOXIDE, CARBON MONOXIDE, ETC.
Disposal
Waste Disposal Methods:DISPOSE I/A/W ALL LOCAL, STATE, OR FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.