BSCSN - #285 FLUX

  • MSDS: BSCSN
  • Manufacturer: QUALITEK INTL INC
  • Product Name: #285 FLUX
  • National Stock Number: 3439-00-069-5815
Product Identification

Product ID:#285 FLUX
MSDS Date:07/01/1994
FSC:3439
NIIN:00-069-5815
MSDS Number: BSCSN

Responsible Party
QUALITEK INTL INC
315 FAIRBANK ST
ADDISON, IL 60101
US

Emergency Phone: 800-535-5053

Info Phone: 708-628-0683 708-628-6543

Cage: 0N5C3

Contractor
QUALITEK INTL INC
ADDISON, IL 60101 US

Telephone: 1-630-628-8083

Cage: 0N5C3

Ingredients

ISOPROPYL ALCOHOL (SARA III)/DIMETHYL CARBINOL

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: <65%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM/500STEL;9394


ROSIN ACID

CAS: 8050-09-7

Fraction By Weight: <35%

Hazards

LD50 LC50 Mixture:TLV FOR PROPANOL IS 400PPM
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:SOLDERING FUMES MAY CAUSE
IRRITATION.SKIN:MAY CAUSE IRRITATION.INGEST:MAY CAUSE GI TRACT
IRRITATION.INHAL:MAY CAUSE RESPIRATORY IRRITATION.
Explanation of Carcinogenicity:THERE ARE NO INGREDIENTS ABOVE 0.1%
WHICH ARE IDENTIFIED AS CARCINOGENS BY NTP,IARC OR OSHA.
Effects of Overexposure:INHAL:HEADACHE,NAUSEA,MUSCLE
PAIN.INGEST:(CHRONIC)-ANEMIA,WEAKNESS,CONSTIPATION,NAUSEA,ABDOMINAL
PAIN,INSOMNIA.SKIN:RASH.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING
KIDNEY,CNS,REPRODUCTIVE AND RESPIRATORY AILMENTS BLOOD DISORDERS
MAY BE AT INCREASED RISK FROM EXPOSURE.

First Aid

First Aid:SKIN:REMOVE CONTAMINATED CLOTHING;WASH WITH SOAP AND
WATER.USE LOTION TO PREVENT DRYNESS.EYES:FLUSH WITH WATER FOR 15
MINUTES.INHAL:REMOVE TO FRESH AIR.GIVE OXYGEN OR ARTIFICIAL
RESPIRATION IF NEEDED. INGEST:DO NOT INDUCE VOMITING.GET
PROMPTQUALIFIED MEDICAL ATTENTION.IF CONSCIOUS,GIVE PLENTY OF WATER
TO DILUTE STOMACH CONTENTS.

Fire Fighting

Flash Point:53.0F,11.7C
Autoignition Temp:Autoignition Temp Text:852F
Lower Limits:2.5
Upper Limits:12.0
Extinguishing Media:DRY CHEMICAL,CARBON DIOXIDE,ALCOHOL FOAM.
Fire Fighting Procedures:USE A SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:CONTAINERS MAY BURST AT ELEVATED
TEMPERATURES.DECOMPOSITION PRODUCTS MAY BE TOXIC.

Accidental Release

Spill Release Procedures:ELIMINATE SOURCES OF IGNITION.USE PROPER
RESPIRATORY AND PROTECTIVE EQUIPMENT.VENTILATE AREA.SOAK UP WITH A
NON-COMBUSTIBLE INERT ABSORBANT(CLAY,SAND);PLACE IN PROPER
CONTAINER FOR DISPOSAL.
Neutralizing Agent:NOT REPORTED.

Handling

Handling and Storage Precautions:STORE IN A COOL,DRY,WELL-VENTILATED
PLACE.KEEP CONTAINER CLOSED WHEN NOT IN USE.KEEP AWAY FROM
HEAT,SPARKS,FLAMES AND INCOMPATIBLE MATERIALS.
Other Precautions:FOLLOW LABEL DIRECTIONS.AVOID BREATHING VAPORS.AVOID
SKIN AND EYE CONTACT.

Exposure Controls

Respiratory Protection:WHERE ENVIRONMENTAL CONTROLS ARE LACKING OR IN
ENCLOSED SPACES USE A NIOSH/MSHA APPROVED CARTRIDGE RESPIRATOR FOR
ORGANIC VAPORS/PARTICULATES FOR SOLDERING SMOKE.
Ventilation:LOCAL VENTILATION AT THE WORKSITE;MECHANICAL(GENERAL)
VENTILATION TO MAINTAIN TLV/PEL.
Protective Gloves:NATURAL RUBBER, NEOPRENE
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING,AS NEEDED.PROVIDE A
LOCAL EYE WASH STATION AND SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS BEFORE EATING, DRINKING, SMOKING, OR
USING TOILET FACILITIES. WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:180F,82C
Vapor Pres:33
Vapor Density:2.07
Spec Gravity:0.870
Evaporation Rate & Reference:<2.3 (N-BUTYL ACETATE=1)
Solubility in Water:PARTIAL
Appearance and Odor:LIQUID;AMBER;MILD ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH HEAT,SOURCES OF IGNITION.
Hazardous Decomposition Products:CARBON DIOXIDE,CARBON MONOXIDE,

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL,STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.