BSFFP - LIQUID HEAT 1550
- MSDS: BSFFP
- Manufacturer: E F HOUGHTON AND CO
- Product Name: LIQUID HEAT 1550
- National Stock Number: 6810-00N040909
Product Identification
Product ID:LIQUID HEAT 1550
MSDS Date:09/22/1987
FSC:6810
NIIN:00N040909
MSDS Number: BSFFP
Responsible Party
US
Emergency Phone: 215-666-4105
Info Phone: 215-666-4105
Preparer: DAVID HEADLINE
Cage: 73227
Contractor
Telephone: 610-666-4105
Cage: 73277
Ingredients
BARIUM CHLORIDE
CAS: 10361-37-2
RTECS: CQ8750000
Fraction By Weight: >60%
OSHA PEL 0.5 MG/M3
ACGIH TLV: 0.5 MG/M3
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL:PROD DUST; BITTER SALTY
TASTE. AVOID BREATHING PROD DUST WHICH MAY CAUSE IRRITATION OF
UPPER RESPIRATORY TRACT. PERSONS W/CHRONIC RESPIRATORY DISEASE MAY
SHOW INCREASED SYMPTOMS DUE TO IR RITATION. SKIN/EYES:MILD
IRRITANT. INGEST:POISON! DO NOT INGEST. CHRONIC: UNKNOWN FOR THIS
PROD. (EFT OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PERSONS W/CHRONIC RESPIRATORY
DISEASE MAY SHOW INCREASED SYMPTOMS DUE TO IRRITATION.
First Aid
First Aid:INHAL:REMOVE TO SOURCE OF FRESH AIR. RINSE MOUTH & THROAT
W/WATER. DO NOT SWALLOW. SKIN:WASH W/SOAP & WATER. EYES:FLUSH
W/WATER FOR AT LEAST 15 MINS. CONSULT MD. INGEST:EPSOM SALTS OR
SODIUM SULFATE I N WATER MAY BE GIVEN BY MOUTH. INDUCE VOMITING.
CONSULT MD.
Fire Fighting
Extinguishing Media:PRODUCT WILL NOT BURN; INORGANIC SALTS. USE MEDIA
SUITABLE FOR SURROUNDING FIRE CONDITIONS .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:AVOID WATER CONTACT W/MOLTEN MATERIAL.
Accidental Release
Spill Release Procedures:BRUSH UP & PLACE IN DRY CONTAINER. THIS
PRODUCT EXCEEDS 100 PPM BARIUM (E P TOXICITY TEST) & BY RCRA
REGUALTION IS CLASSIFIED AS A HAZARDOUS WASTE IF DISCARDED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A DRY AREA. KEEP MATERIAL
FROM BECOMING DAMP. KEEP CONTAINER TIGHTLY CLOSED. MELT DOWN
SLOWLY. DO NOT EXCEED WORKING TEMPERATURE RANGE.
Other Precautions:DO NOT ADD WET WORK. AVOID BREATHING DUST.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED MECHANICAL FILTER OR DUST
MASK WHEN HANDLING DRY POWDER.
Ventilation:AS FOR MOLTEN SALT BATHS.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APRV CHEM WORK GOGG .
Other Protective Equipment:IN MOLTEN STATE, USE HEAVY GLOVES & FACE
SHIELD.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:HTW (POWDER)
Solubility in Water:COMPLETE
Appearance and Odor:WHITE SALT MIXTURE; NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
MOLTEN STATE: AVOID WATER CONTACT.
Stability Condition to Avoid:AVOID DAMPNESS.
Hazardous Decomposition Products:NONE.
Disposal
Waste Disposal Methods:SMALL QTYS OF CONTAMD MATERIAL MAY BE DISSOLVED
IN A CONTAINER OF WATER. ADD MORE THAN AN EQUAL WEIGHT OF SODIUM
SULPHATE & DISSOLVE. LET STAND OVERNIGHT. DISCHARGE LIQUID PHASE &
TREAT SLUDGE AS SOLI D WASTES. DISP I/A/W FED, STATE & LOC REGS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.