BSGPB - DERUSTO RUST PREVENTATIVE ENAMEL WITH BUILT-IN-PRIMER
- MSDS: BSGPB
- Manufacturer: DAP INC
- Product Name: DERUSTO RUST PREVENTATIVE ENAMEL WITH BUILT-IN-PRIMER
- National Stock Number: 8010-00D001676
Product Identification
Product ID:DERUSTO RUST PREVENTATIVE ENAMEL WITH BUILT-IN-PRIMER
MSDS Date:09/17/1991
FSC:8010
NIIN:00D001676
MSDS Number: BSGPB
Responsible Party
DAYTON, OH 45401-0277
US
Emergency Phone: 513-667-4461
Info Phone: 513-667-4461
Cage: 90300
Contractor
Telephone: 708-459-5000
Cage: 5L973
Ingredients
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 0.5-1%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM/150STEL;9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TRADE SECRET COMPONENTS-REMAINDER ARE CONSIDERED SO BY
Fraction By Weight: BALANCE
HYDROTREATED LIGHT PETROLEUM DISTILLATE (AS VM&P NAPHTHA)
CAS: 64742-47-8
Fraction By Weight: 15-35%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
STODDARD SOLVENT
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 5-15% %
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM; 9394
NAPHTHA, LIGHT AROMATIC
CAS: 64742-95-6
Fraction By Weight: <5%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM 9091
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY IRRITATE EYES, SKIN, NOSE &
UPPER RESPIRATORY TRACT. HARMFUL IF INHALED. HARMFUL OR FATAL IF
SWALLOWED. CHRONIC: REPORTS HAVE ASSOCIATED PROLONGED & REPEATED
OCCUPATIONAL OVEREXPOSURE TO SO LVENTS WITH PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:IF INGESTED CAUSES VOMITING, DIARRHEA AND
DEPRESSED RESPIRATION. INHALATION MAY EFFECT THE BRAIN OR NERVOUS
SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR 15 MINUTES.
CONTACT A PHYSICIAN IMMEDIATELY. SKIN: WASH IMMEDIATELY WITH SOAP
AND WATER. INHALATION: REMOVE TO FRESH AIR. CONTACT A PHYSICIAN
IMMEDIATELY. I NGESTION: DO NOT INDUCE VOMITING. CONTACT A
PHYSICIAN OR REGIONAL POISION CONTROL CENTER IMMEDIATELY.
Fire Fighting
Flash Point Method:CC
Flash Point:100F,38C
Extinguishing Media:CARBON DIOXIDE, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT, INCLUDING SELF
CONTAINED BREATHING APPARATUS IS RECOMMENDED TO PROTECT FROM
COMBUSTION PRODUCTS. COOL EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:CONTAINERS MAY EXPLODE IF EXPOSED TO
EXTREME HEAT. ELIMINATE SOURCE OF IGNITION: HEAT, ELECTRICAL
EQUIPMENT, SPARKS & OPEN FLAMES. DO NOT PUT NEAR OXIDIZERS.
Accidental Release
Spill Release Procedures:VACUUM UP AND REUSE EXCESS LIQUID. ABSORB
REMAINING LIQUID WITH ABSORBENT MATERIAL AND PLACE INTO CONTAINERS
FOR LATER DISPOSAL.
Handling
Handling and Storage Precautions:STORE AWAY FROM CAUSTICS AND
OXIDIZERS. KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. DO NOT
STORE AT TEMPERATURES ABOVE 120F OR EXCESSIVE FREEZING.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
INHALING VAPORS MAY BE HARMFUL OR FATAL. KEEP OUT OF REACH OF
CHILDREN.
Exposure Controls
Respiratory Protection:IF 8-HOUR EXPOSURE LIMIT OR VALUE IS EXCEEDED
FOR ANY COMPONENT, USE AN APPROVED NIOSH/OSHA RESPIRATOR. CONSULT
YOUR SAFETY EQUIPMENT SUPPLIER AND THE OSHA REGULATION, 29 CFR
1910.134 FOR REQUIREMENTS .
Ventilation:PROVIDE SUFFICIENT MECHANICAL VENTILATION (LOCAL OR GENERAL
EXHAUST) TO MAINTAIN EXPOSURE BELOW PEL AND TLV.
Protective Gloves:NITRILE
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES
Other Protective Equipment:PROVIDE EYEWASH AND SOLVENT IMPERVIOUS APRON
IF BODY CONTACT WITH PRODUCT OCCURS. BARRIER CREAMS MAY BE USED.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
VAPORS ARE HEAVIER THAN AIR AND WILL COLLECT IN LOW AREAS. CHECK ALL
LOW AREAS (BASEMENTS, SUMPS, ETC.) FOR VAPOR BEFORE ENTERING.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:>281F,>138C
Vapor Pres:<12 MM HG
Vapor Density:>1 (AIR=1)
Spec Gravity:0.9-1.3
Evaporation Rate & Reference:36 (EHTYL ETHER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OPAQUE LIQUID, VARIOUS COLORS; GASOLINE-LIKE ODOR.
Percent Volatiles by Volume:44-54
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND CAUSTICS.
Stability Condition to Avoid:EXCESSIVE HEAT. CONTACT WITH STRONG
OXIDIZING AGENTS OR CAUSTICS.
Hazardous Decomposition Products:NORMAL COMBUSTION PRODUCTS, I.E.
OXIDES OF CARBON AND NITROGEN.
Disposal
Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS. DISCARDED MATERIAL SHOULD BE INCINERATED AT A
PERMITTED FACILITY. EPA WASTE NUMBER D001 MAY APPLY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.