BSGTN - RC-2 RESIN
- MSDS: BSGTN
- Manufacturer: IMPCO INC
- Product Name: RC-2 RESIN
- National Stock Number: 8040-00N040877
Product Identification
Product ID:RC-2 RESIN
MSDS Date:04/24/1989
FSC:8040
NIIN:00N040877
MSDS Number: BSGTN
Responsible Party
PROVIDENCE, RI 02908
US
Emergency Phone: 401-521-2490
Info Phone: 401-521-2490
Preparer: MICHAEL BALLOU
Cage: 24221
Contractor
Telephone: 401-521-2490
Cage: 24221
Ingredients
35
RTECS: 9999999VO
D001. DISPOSE OF I/A/W FEDERAL, STATE AND
RTECS: 9999999ZZ
STYRENE
CAS: 100-42-5
RTECS: WL3675000
Fraction By Weight: 30-40%
OSHA PEL 50 PPM, 100 STEL
ACGIH TLV: 50 PPM, 100 STEL,S
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN:PRLNGD/FREQ CONT MAY CAUSE DEFAT
& DRY OF SKIN W/RESULTANT IRRIT & POSS DERM. STYRENE MAY BE
ABSORBED THRU SKIN IN TOX AMTS. EYES: MAY CAUSE IRRIT. LIQ SPLASHES
MAY RSLT IN MORE SERIOUS INJURIES. MAY CAUSE LACHRYMATION (TEARS).
INHAL:VAPS MAY CAUSE MUC MEMB IRRIT & UPPER RESP TRACT (EFTS OF
OVEREXP)
Explanation of Carcinogenicity:STYRENE: GROUP 2B (IARC SUPP7, P345,
'87).
Effects of Overexposure:HLRH HAZ: DISCOMFORT. HIGH CONC MAY RSLT IN
HDCH, NAUS, INSENSIBILITY & OTHER CNS EFTS. RPTD EXPOS TO HIGH CONC
MAY CAUSE LIVER & KIDNEY DAM. INGEST: MAY CAUSE GI DISTURB, PAIN,
DISCOMFORT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE FROM EXPOSURE. IF UNCON, ADMINISTER ARTIFICIAL
RESPIRATION &/OR OXYGEN AS NEEDED. KEEP WARM & QUIET. SKIN: WASH
AFFECTED AREAS WITH SOAP & WATER; REMOVE CONTAMINATED CLOTHING.
EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SEEK IMMEDIATE
MEDICAL ATTENTION. INGEST: DO NOT INDUCE VOMITING. SEEK IMMEDIATE
MEDICAL AID.
Fire Fighting
Flash Point Method:PMCC
Flash Point:88.0F,31.1C
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:FOAM, DRY CHEM, CARBON DIOXIDE/ANY CLASS B EXTING
AGENT.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . FIGHT LIKE FUEL OIL FIRE.
Unusual Fire/Explosion Hazard:STYRENE WILL POLYMERIZE READILY @
ELEVATED TEMPS OF FIRE CNDTNS. IF THIS OCCURS IN A CLSD CONTRS,
THERE IS A POSSIBILITY OF VIOLENT RUPTURE. PROD (SUPP DATA)
Accidental Release
Spill Release Procedures:REMOVE SATURATED CLTHG PROMPTLY & WASH
AFFECTED AREAS W/SOAP & WATER.REMOVE ALL SOURCES OF IGNIT. VENT
AREA. ABSORB W/INERT MATLS SUCH AS VERMICULITE/SAND & PLACE IN CLSD
CONTRS.IF LG SPILL, DIKE AREA TO PVNT MATL FROM ENTERING WATER SYS
&/OR SEWERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 100F. STORING LARGE
QTY IN BUILDING DESIGNED AND PROTECTED FOR STORAGE OF FLAMMABLE
LIQUIDS.
Other Precautions:DO NOT TAKE INTERNALLY. CONTAINERS SHOULD BE GROUNDED
WHEN POURING. AVOID FREE FALL OF LIQ IN EXCESS OF A FEW INCHES.
AVOID IMPROPER ADDITION OF PROMOTOR &/OR CATALYST.
Exposure Controls
Respiratory Protection:A NIOSH/MSHA APPRVD CANNISTER-TYPE RESP FOR ORG
VAPS MUST BE WORN TO PVNT INHAL OF VAPS/SPRAY MISTS WHEN TLV/PEL IS
EXCEEDED.
Ventilation:GEN VENT IS REQD DURING NORM USE. LOC VENT MAY BE REQD
DURING CERTAIN OPERATIONS TO KEEP EXPOS LEVELS BELOW TLV LISTED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APRV CHEM WRK GOG&FL LGTH FSHLD(FPN
Other Protective Equipment:SAFETY SHOWER AND EYE WASH STATION SHOULD BE
AVAILABLE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV: 1.08-1.11@25C. VD: 3.6 (STYRENE). EXPLO HAZ: VAPS MAY FORM
AN EXPLOS MIXT IN AIR. WASTE DISP METH: LBLG, PKG, & RECORD KEEPING
STD. EXTREME CARE SHOULD BE TAKEN TO ENSURE THAT IT IS DISPOSE D OF
ONLY IN A FACILITY PERMITTED FOR DISP. STD DISP PROC FOR PAINT. DO
NOT INCIN IN CLSD CONTRS. RCRA HAZ WASTE (ING 3)
Chemical Properties
Boiling Pt:B.P. Text:295F,146C
Vapor Pres:<5.2@20C
Vapor Density:SUPP DATA
Spec Gravity:SUPP DATA
Evaporation Rate & Reference:< N-BUTYL ACETATE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER IN COLOR-PUNGENT ODOR
Percent Volatiles by Volume:30-40
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:TEMPERATURES ABOVE 120F AWAY FROM DIRECT
SUNLIGHT.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, LOW
MOLECULAR WEIGHT HYDROCARBONS AND ORGANIC ACIDS.
Disposal
Waste Disposal Methods:MATL HAS BEEN TESTED & FOUND TO HAVE FL PT BELOW
140F. IF DISCARDED, MATL & CONTRS SHOULD BE TREATED AS HAZ WASTE
BASED ON CHARACT OF IGNITABILITY AS DEFINED UNDER FED RCRA REGS
(40CFR261). DISP OF MA TL & ITS CONTR, REQ COMPLIANCE W/APPLIC(SUPP
DATA)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.