Product ID:POLY(ISOBUTYL METHACRYLATE), 112
MSDS Date:10/01/1992
FSC:6810
NIIN:00N046793
MSDS Number: BSJVW

Emergency Phone: 716-265-0413

Info Phone: 716-265-0413

Cage: 0MWG0

Telephone: 716-265-0413

Cage: 0MWG0

15 MG/M3 TDUST;

CAS: 9011-15-8

Fraction By Weight: 100%

OSHA PEL SEE INGREDIENT NAME

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN CONTACT MAY CAUSE
DISCOMFORT OR RASH; POSSIBLY ALLERGIC SKIN RASHES. EYE IRRITATION
WITH DISCOMFORT, TEARING OR BLURRED VISION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IN ALL CASES, IF IRRITATION DEVELOPS, SEEK MEDICAL
ASSISTANCE. INHAL: REMOVE FROM EXPOSURE. IF BREATHING STOPS, BEGIN
MOUTH TO MOUTH. EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
SKIN: WASH AFFECTE D AREA WITH SOAP AND WATER. REMOVE DIRTY
CLOTHING. INGEST: GET IMMED MED ATTN .

Flash Point:572F,300C
Extinguishing Media:CHEMICAL FOAM, CO2, WATER FOG, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:SWEEP UP CAREFULLY TO PREVENT A SLIPPING
HAZARD. PLACE IN CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN DRY COOL PLACE. KEEP
CONTAINERS CLOSED TO PREVENT CONTAMINATION. OPEN CONTAINERS ONLY IN
WELL-VENTILATED AREA.
Other Precautions:NOTE: THIS MATERIAL IS INTENDED FOR LABORATORY USE
ONLY. IT IS NOT TO BE SOLD OR INTENDED FOR DRUG, HOUSEHOLD OR OTHER
USES.

Respiratory Protection:IF NEEDED. USE NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Solubility in Water:NIL
Appearance and Odor:SMALL ROUND BEADS, NO ODOR
Percent Volatiles by Volume:<1

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:TEMPERATURES ABOVE 570F.
Hazardous Decomposition Products:CO.

Waste Disposal Methods:I/A/W FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.