Product ID:08504 LUBRI/FAST; LUBFAST PLEX BLACK
MSDS Date:11/21/1985
FSC:9150
NIIN:00F030806
MSDS Number: BSLWV

TYLER PIPE INDUSTRIES INC

2728 EMPIRE CENTRAL
DALLAS, TX 75235
US

Emergency Phone: 214-353-1600

Info Phone: 214-353-1600

Cage: TYLER

TYLER PIPE INDUSTRIES INC

DALLAS, TX 75235 US

Telephone: 214-353-1600

Cage: TYLER

SOLVENT NAPHTHA, PETROLEUM, LIGHT AROMATIC, HIGH FLASH

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: 21.62%

ACGIH TLV: 100 PPM

TOLUENE

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 57.21%

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

7.75

RTECS: 9999999WG

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: LUNG IRRITATION. EYES:
IRRITATION. OVEREXPOSURE TO SOLVENTS MAY CAUSE PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHES, NAUSEA.

First Aid:EYES: FLUSH W/WATER FOR 5-10 MINS. SKIN: WIPE PAINT OFF &
WASH AREA. INGESTION: DON'T INDUCE VOMITING. INHALATION: REMOVE TO
FRESH AIR. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:85F
Lower Limits:0.9
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, SAND
Fire Fighting Procedures:AVOID USE OF WATER.
Unusual Fire/Explosion Hazard:CONTAINERS MAY RUPTURE DUE TO VERY HIGH
TEMPERATURE INDUCED PRESSURE.

Spill Release Procedures:ELIMINATE IGNITION SOURCES. STOP SPILL OR LEAK
AT ONCE. CONTAIN SPILL OR LEAK BY DIKING. COVER W/INERT ABSORBANT
MATERIAL. SHOVEL/SWEEP INTO DISPOSABLE CONTAINER.

Respiratory Protection:FOR CONFINED AREAS: WEAR APPROPRIATE FITTED
RESPIRATION APPROVED BY NIOSH/MSHA DURING & AFTER APPLICATION.
Ventilation:LOCAL EXHAUST PREFERABLE. MECHANICAL IS BEST.
Protective Gloves:SOLVENT RESISTANT
Eye Protection:FACE SHIELD OR GOGGLES
Work Hygienic Practices:WASH HANDS THROUGHLY AFTER USE.
Supplemental Safety and Health

Boiling Pt:B.P. Text:281-410F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:84

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS
Stability Condition to Avoid:HIGH TEMPERATURES & OTHER IGNITION SOURCES

Waste Disposal Methods:SHOVEL INTO DRUMS. INCINERATE IN ACCORDANCE
W/FEDERAL, STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.