BSMFF - 036081-05 NI-332
- MSDS: BSMFF
- Manufacturer: UNION CARBIDE COATING SERVICE CORP
- Product Name: 036081-05 NI-332
- National Stock Number: 3439-00F030923
Product Identification
Product ID:036081-05 NI-332
MSDS Date:01/22/1992
FSC:3439
NIIN:00F030923
MSDS Number: BSMFF
Responsible Party
INDIANAPOLIS, IN 46224-3283
US
Emergency Phone: 317-240-2186/317-240-2209
Info Phone: 317-240-2186/317-240-2650
Preparer: DELMAR BEIGHT
Cage: UNICA
Contractor
Telephone: 317-240-2650 OR 800-822-4357
Cage: UNICA
Ingredients
20
RTECS: 9999999WG
NICKEL (SOLUBLE) (SUSPECTED HUMAN CARCINOGEN BY NTP, IARC,
CAS: 7440-02-0
RTECS: QR5950000
Fraction By Weight: 50-75%
OSHA PEL 1 MG/CUM
ACGIH TLV: 0.05 MG/CUM IC
COBALT
CAS: 7440-48-4
RTECS: GF8750000
Fraction By Weight: 5-20%
OSHA PEL 0.05 MG/CUM
ACGIH TLV: 0.05 MG/CUM
CHROMIUM METAL, CHROMIUM, CHROME (SUSPECTED A1 HUMAN
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 5-20%
OSHA PEL 1 MG/CUM
ACGIH TLV: 0.5 MG/CUM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
TITANIUM (DRY POWDER) (TI)
CAS: 7440-32-6
RTECS: XR1700000
Fraction By Weight: 1-5%
OSHA PEL 5 MG/CUM
ACGIH TLV: 5 MG/CUM
SILICON
CAS: 7440-21-3
RTECS: VW0400000
Fraction By Weight: 1-5%
OSHA PEL 10 MG/CUM
ACGIH TLV: 10 MG/CUM
TUNGSTEN (INSOLUBLE), WOLFRAM
CAS: 7440-33-7
RTECS: YO7175000
Fraction By Weight: 1-5%
OSHA PEL 5 MG/CUM
ACGIH TLV: 5 MG/CUM
MOLYBDENUM (SOLUBLE COMPOUND), LEAD MOLYBDATE
CAS: 7439-98-7
RTECS: QA4680000
Fraction By Weight: 1-5%
OSHA PEL 5 MG/CUM
ACGIH TLV: 5 MG/CUM
ALUMINUM (POWDER)
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: 1-5%
OSHA PEL 15 MG/CUM
ACGIH TLV: 10 MG/CUM (DUST)
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN: ALLERGIC DERMATITIS/PAPULAR
FORMATION. INGESTION: DEPRESSED CNS. INHALATION: RESPIRATORY TRACT
IRRITANT/DEPRESSED CNS/INTERSTITIAL
PNEUMONITIS/SENSITIZATION/EMPHYSEMA/PULMONARY FIBROTIC DISEASE.
EYES: IRRITANT/CORNEAL DAMAGE/POLYCYTHEMIA/THYROID GLAND
HYPERPLASIA/ALPHA CELL DAMAGE. NICKEL-ECZEMA/NEURODERMATITIS.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:SKIN: REDNESS/ULCERS PROGRESSING TO
DRYNESS/SCALING/FEVER/LESION/ITCHING/SORENESS/BURNING SENSATION.
EYE: REDNESS & EXCESS REDNESS OF CONJUNCTIVA. INGESTION:
NAUSEA/ABDOMINAL PAIN/VOMITING/DIARRHEA/BU RNING SENSATION.
INHALATION: CHEST PAIN, VOMITING, DIARRHEA, BURNING SENSATION. ARC
RAYS CAN BURN EYES/SKIN.
Medical Cond Aggravated by Exposure:ASTHMA, INFLAMMATORY OR FIBROTIC
PULMONARY DISEASE, DERMATITIS
First Aid
First Aid:INGESTION: GIVE AT LEAST 2 GLASSES MILK/WATER. INDUCE
VOMITING UNLESS UNCONSCIOUS. SKIN: WASH THOROUGHLY W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF NECESSARY.
EYES: FLUSH THOR OUGHLY W/PLENTY OF WATER. OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Fire Fighting
Flash Point:NONE
Extinguishing Media:SPECIAL DRY POWDER METAL EXTINGUISHING MATERIAL FOR
METAL FIRES. APPROPRIATE EXTINGUISHER FOR COMBUSTIBLE MATERIALS.
Fire Fighting Procedures:NFPA51 OXYGEN-FUEL GAS SYSTEMS FOR
WELDING/CUTTING & NFPA58 STANDARD FOR THE STORAGE & HANDLING OF
LIQUIFIED PETROLEUM GASES.
Unusual Fire/Explosion Hazard:AIRBORNE DUST PARTICLES/METAL
DUST/ACCUMULATION OF SUCH SHOULD BE TREATED AS EXPLOSIVES.
Accidental Release
Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT TO PROTECT AGAINST
HAZARDS & DISPOSE OF.
Handling
Handling and Storage Precautions:WHEN THERMAL SPRAYING, ELECTRICITY CAN
CAUSE FATAL SHOCK. DON'T TOUCH LIVE ELECTRICAL PARTS.
Other Precautions:TAKE PERSONAL AIR SAMPLES & ANALYZE FOR HAZARDOUS
INGREDIENTS/DECOMPOSITION PRODUCTS TO DETERNINE USAGE OF
RESPIRATOR. ALWAYS SPRAY W/ENOUGH VENTILATION. AREA & SPARKS DURING
SPRAYING CAN BE A SOURCES OF IGNITION OF COMBUSTIBLE MATERIALS.
Exposure Controls
Respiratory Protection:DEPENDS UPON SPECIFIC USE, CONDITION, &
LOCATION. IF THERE IS DUSTINESS, WEAR RESPIRATOR SELECTED BY OSHA.
Ventilation:LOCAL DUST PICK UP & VENTILATION RECOMMENDED
Protective Gloves:REQUIRED WHEN THERMAL SPRAYING
Eye Protection:GOGGLES WHEN DUSTY
Other Protective Equipment:BODY PROTECTION, HELMET, FACE SHIELDS
Supplemental Safety and Health
NOTE TO PHYSICIAN: THE HAZARDS OF THIS MATERIAL ARE MAINLY DUE TO ITS
SENSITIZING & MILD IRRITATING PROPERTIES. THERE IS NO SPECIFIC
ANTIDOTE. TREATMENT OF OVEREXPOSURE SHOULD BE DIRECTED AT THE CONTR
OL OF SYMPTOMS & THE CLINICAL CONDITION. LIQUID DENSITY: HEAVIER
THAN WATER.
Chemical Properties
Spec Gravity:2.40183
Appearance and Odor:DUSTY YELLOW GRAY POWDER.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:IGNITION SOURCES
Hazardous Decomposition Products:OXIDES, SUB-OXIDES, COMPLEX OXIDES OF
THE MATERIALS OF THIS PRODUCT
Disposal
Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.