BSMMC - 167 MOLY SYNTHETIC GEAR LUBE SAE 75W-140

  • MSDS: BSMMC
  • Manufacturer: SCHAEFFER MFG COMPANY
  • Product Name: 167 MOLY SYNTHETIC GEAR LUBE SAE 75W-140
  • National Stock Number: 9150-00F031044
Product Identification

Product ID:167 MOLY SYNTHETIC GEAR LUBE SAE 75W-140
MSDS Date:05/01/1991
FSC:9150
NIIN:00F031044
MSDS Number: BSMMC

Responsible Party
SCHAEFFER MFG. COMPANY
102 BARTON STREET
ST LOUIS, MO 63104
US

Emergency Phone: 800-325-9962/314-865-4100,966-5681

Info Phone: 800-325-9962/314-865-4100,966-5681

Cage: GO253

Contractor
SCHAEFFER MFG. COMPANY
ST LOUIS, MO 63104 US

Telephone: 800-325-9962/314-865-4100,966-5681

Cage: GO253

Ingredients

EXTREME PRESSURE ADDITIVE

Fraction By Weight: 5-10%


DIMETHYL SILOXANE),

CAS: 63148-62-9

RTECS: JT6484500

Fraction By Weight: <0.1%


BLUE DYE

CAS: 71819-49-3

Fraction By Weight: 0.05%


ORGANOMOLYBDENUM *93-3*

CAS: 68958-92-9

Fraction By Weight: <1%

ACGIH TLV: 15 MG/CUM


1-DECENE HOMOPOLYMER, HYDROGENATED *93-3*

CAS: 68037-01-4

Fraction By Weight: 85-90%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MODERATE IRRITATION. SKIN:
REPEATED OR PROLONGED CONTACT CAN CAUSE IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN: REDNESS. INHALATION: POSSIBLE CHEST
DISCOMFORT.

First Aid

First Aid:INGESTION: GIVE A LARGE AMOUNT OF WATER TO DRINK. DON'T
INDUCE VOMITING. SKIN: WASH THOROUGHLY W/SOAP & WATER. LAUNDER
CONTAMINATED CLOTHING. INHALATION: REMOVE TO FRESH AIR. IF
NECESSARY, GIVE OXYGEN OR CPR. EYES: FLUSH IMMEDIATELY W/WATER FOR
15 MINS. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:COC
Flash Point:460F/237.8C
Extinguishing Media:CO2 FOAM, DRY CHEMICAL FOAM, SAND, EARTH, WATERFOG
Fire Fighting Procedures:FOR FIRES INVOLVING THIS MATERIAL DON'T ENTER
ANY ENCLOSED/CONFINED SPACE W/OUT PROPER PROTECTIVE EQUIPMENT
INCLUDING SCBA.

Accidental Release

Spill Release Procedures:THIS MATERIAL ISN'T EXPECTED TO PRESENT ANY
ENVIRONMENTAL PROBLEMS OTHER THAN THOSE ASSOCIATED W/OIL SPILLS.
CLEAN UP IMMEDIATELY. ABSORB LARGE SPILLS W/ABSORBENT
CLAY/DIATOMACEOUS EARTH/OTHER SUITABL E MATERIAL. DON'T FLUSH INTO
SEWER/WATERWAY.

Handling

Handling and Storage Precautions:DON'T STORE NEAR IGNITION SOURCES.
KEEP CONTAINERS CLOSED WHEN NOT IN USE.
Other Precautions:KEEP AWAY FROM FOOD & FEED PRODUCTS.

Exposure Controls

Respiratory Protection:AS REQUIRED.
Ventilation:ADEQUATE
Eye Protection:GOGGLES OR FACE SHIELD
Work Hygienic Practices:WASH THOROUGHLY W/SOAP & WATER AFTER HANDLING.
REMOVE OIL SOAKED CLOTHING, LAUNDER BEFORE REUSE.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:>600F
Vapor Pres:<0.1
Spec Gravity:0.8702
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLUE COLOR, SLIGHT SMELL.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH HEAT, HIGH ENERGY IGNITION SOURCES
Hazardous Decomposition Products:OXIDES OF CARBON, NITROGEN, SULFUR,
PHOSPHOROUS, & MOLYBDENUM

Disposal

Waste Disposal Methods:DISPOSE OF AT AN APPROVED WASTE DISPOSAL SITE OR
FACILITY IN ACCORDANCE W/ALL APPLICABLE STATE, FEDERAL, & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.