BSMPN - 2W755A CUTTING & DRILLING FLUID

  • MSDS: BSMPN
  • Manufacturer: SPRAYON PRODUCTS
  • Product Name: 2W755A CUTTING & DRILLING FLUID
  • National Stock Number: 9150-00F031092
Product Identification

Product ID:2W755A CUTTING & DRILLING FLUID
MSDS Date:02/06/1991
FSC:9150
NIIN:00F031092
MSDS Number: BSMPN

Responsible Party
SPRAYON PRODUCTS
26300 FARGO AVE
BEDFORD HTS, OH 44146-1310
US

Emergency Phone: 216-292-7400

Info Phone: 216-292-7400

Cage: 09800

Contractor
SHERWIN-WILLIAMS DIVERSIFIED BRANDS, INC.
BEDFORD HEIGHTS, OH 44146 US

Telephone: 216-292-7400 OR 216-595-8634

Cage: 09800

Ingredients

PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 5%

OSHA PEL 1000 PPM

ACGIH TLV: SIMPLE ASPHYXIANT


ISOBUTANE, 2-METHYLPROPANE

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 5%

OSHA PEL 1800 MG/CUM

ACGIH TLV: 1000 PPM


HEAVY ALIPHATIC NAPHTHA *93-3*

CAS: 64742-96-7

Fraction By Weight: 20%


PETROLEUM OIL, HYDROTREATED HEAVY NAPHTHENIC DISTILLATE

CAS: 64742-52-5

RTECS: PY8035001

Fraction By Weight: 65-70%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES, SKIN & RESPIRATORY SYSTEM:
IRRITATION. MAY CAUSE NERVOUS SYSTEM DEPRESSION & CAN BE FATAL.
OVEREXPOSURE TO SOLVENTS MAY CAUSE PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE & ADVERSE EFFECTS TO LIVER/U RINARY & CARDIOVASCULAR
SYSTEMS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN: REDNESS, ITCHING, BURNING SENSATION.
INHALATION: HEADACHE, DIZZINESS, NAUSEA, LOSS OF COORDINATION.

First Aid

First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING IF
STOPPED. KEEP WARM & QUIET. SKIN: WASH W/SOAP & WATER. EYES: FLUSH
W/WATER FOR 15 MINS. INGESTION: DON'T INDUCE VOMITING. GIVE SEVERAL
GLASSES OF WATER. NEVER GIVE ANYTHING BY MOUTH TOAN UNCONSCIOUS
PERSON. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:<0F
Lower Limits:1%
Upper Limits:7%
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING & SCBA. WATER
STREAM MY BE INEFFECTIVE, USE WATER FOG. USE WATER TO COOL
CONTAINERS & PREVENT AUTOIGNITION OR EXPLOSION.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE DUE TO
BUILT-UP PRESSURE WHEN EXPOSED TO EXTREME HEAT. VAPORS WILL
ACCUMULATE READILY & IGNITE EXPLOSIVELY.

Accidental Release

Spill Release Procedures:REMOVE IGNITION SOURCES. VENTILATE AREA.
REMOVE W/ABSORBANT.

Handling

Handling and Storage Precautions:KEEP AWAY FROM IGNITION SOURCES. KEEP
AREA VENTILATED. DON'T SMOKE. USE APPROVED BONDING & GROUNDING
PROCEDURES. DON'T PUNCTURE/EXPOSE TO TEMP >120F.
Other Precautions:DON'T TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN.
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING THE
CONTENTS CAN BE HARMFUL/FATAL. AVOID BREATHING VAPORS/SPRAY MIST &
CONTACT W/SKIN & EYES.

Exposure Controls

Respiratory Protection:IF EXPOSURE ABOVE LIMITS, WEAR A PROPERLY FITTED
ORGANIC VAPOR/PARITCULATE RESPIRATOR APPROVED BY NIOSH/MSHA. WHEN
SANDING/ABRADING DRIED FILM, WEAR A DUST/MIST RESPIRATOR APPROVED
BY NIOSH/MSHA.
Ventilation:IF EXPOSURE ABOVE LIMITS, USE LOCAL OR GENERAL EXHAUST.
Protective Gloves:REQUIRED
Eye Protection:SAFETY GLASSES W/SIDESHILDS
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. REMOVE/LAUNDER
CLOTHING BEFORE REUSE.
Supplemental Safety and Health
PRODUCT MAY CONTAIN MATERIALS CLASSIFIED AS NUISANCE PARTICULATES WHICH
MAY BE PRESENT AT HAZARDOUS LEVELS ONLY DURING SANDING & ABRADING
OF THE DRIED FILM.

Chemical Properties

Boiling Pt:B.P. Text:<0-292F
Vapor Density:>1
Evaporation Rate & Reference:FASTER THAN ETHER
Percent Volatiles by Volume:>75

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXTREME HEAT, TEMP >120F, DIRECT SUNLIGHT,
& OTHER IGNITION SOURCES
Hazardous Decomposition Products:CO, CO2

Disposal

Waste Disposal Methods:WASTE MAY BE HAZARDOUS & MUST BE TESTED FOR
IGNITABILITY. DON'T INCINERATE OR DEPRESSURIZE CONTAINERS. DISPOSE
I/A/W LOCAL, STATE & FEDERAL REGULATIONS. EXTREMELY FLAMMABLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.