Product ID:02-752-WB LATEX SEMI-GLOSS ENAMEL - WHITE & LIGHT TINTS
MSDS Date:02/12/1992
FSC:8010
NIIN:00F031223
MSDS Number: BSMWV

COLUMBIA PAINT CO

N 112 HAVEN ST
SPOKANE, WA 99202-3822
US

Emergency Phone: 509-535-9741

Info Phone: 509-535-9741

Cage: 1DY82

COLUMBIA PAINT COMPANY

SPOKANE, WA 99202-3822

Telephone: (509) 535-9741

Cage: 1DY82

ETHYLENE GLYCOL, GLYCOL

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1.78%

ACGIH TLV: C 127 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

10.4

RTECS: 9999999WG

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY TRACT
IRRITATION. EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHE & NAUSEA.

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER FOR 15
MINS. INGESTION: DRINK 1-2 GLASSES OF WATER TO DILUTE. DON'T INDUCE
VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:TCC
Flash Point:200F
Extinguishing Media:WATER FOG
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:MATERIALS WILL NOT SUSTAIN COMBUSTION
UNLESS WATER HAS EVAPORATED. CLOSED CONTAINERS MAY EXPLODE FROM
STEAM PRESSURE WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT. WIPE UP LIQUID
MATERIAL W/ABSORBENT CLOTH.

Handling and Storage Precautions:DON'T STORE IN EXCESSIVE HEAT (>120F).
USE W/ADEQUATE VENTILATION.
Other Precautions:AVOID CONTACT W/EYES.

Respiratory Protection:USE APPROVED CHEMICAL/MECHANICAL FILTERS TO
REMOVE PARTICULATES & VAPOR.
Ventilation:AIR MOVEMENT TO REMOVE EXCESS VAPORS
Protective Gloves:REQUIRED
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM.
Supplemental Safety and Health

Boiling Pt:B.P. Text:212-471F
Vapor Density:<1
Evaporation Rate & Reference:SLOWER THAN BU AC
Solubility in Water:COMPLETE
Appearance and Odor:WHITE LIQUID
Percent Volatiles by Volume:69.4

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:CO, CO2, HYDROGEN CHLORIDE, OXIDES OF
NITROGEN

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.