Product ID:A-100
MSDS Date:01/18/1991
FSC:6850
NIIN:00F031334
MSDS Number: BSNDF

ACCUMETRIC INC

350 RING ST
ELIZABETHTOWN, KY 42701
US

Emergency Phone: 502-769-3385

Info Phone: 502-769-3385

Cage: 58149

ACCUMETRIC INC

843 ELIZABETHTOWN, KY 42701 US

Telephone: 502-769-3385

Cage: 58149

ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 75%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM

DIBUTYLTIN DILAURATE

CAS: 77-58-7

RTECS: WH7000000

Fraction By Weight: 25%

OSHA PEL 0.1 MG/CUM (SN)

ACGIH TLV: 0.1 MG/CUM, SN(SKIN)

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: PAIN, TEMPORARY DISCOMFORT.
INHALATION: VERY SLIGHT IRRITATION OF RESPIRATORY PASSAGES.
Explanation of Carcinogenicity:NONE

First Aid:EYES: FLUSH W/WATER. SKIN: WIPE OFF & FLUSH W/WATER. OBTAIN
MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:CC
Flash Point:53F
Lower Limits:2.3%
Upper Limits:12.7%
Extinguishing Media:CO2, FOAM

Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT & CONTAIN
FOR SALVAGE & DISPOSAL.

Handling and Storage Precautions:PRODUCT IS COMBUSTIBLE. STORE IN DRY
AREA. WHEN CONTAINER IS OPEN, KEEP CLEAN/DRY. USE REASONABLE
CAUTION/CARE. VENTILATE AREA AT ROOM TEMPERATURE.
Other Precautions:DON'T PACKAGE/STORE IN UNVENTED CONTAINERS.

Ventilation:MECHANICAL (GENERAL): RECOMMENDED WHEN USED AT ELEVATED
TEMPERATURES.
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED WHEN USED AT ELEVATED
TEMPERATURES.
Work Hygienic Practices:WASHING AT MEAL TIME & AT END OF SHIFT IS
ADEQUATE.
Supplemental Safety and Health

Boiling Pt:B.P. Text:180F
Melt/Freeze Pt:M.P/F.P Text:<70
Vapor Pres:40
Vapor Density:<1
Spec Gravity:0.85
Evaporation Rate & Reference:(BU AC = 1) >1
Solubility in Water:APPRECIABLE
Appearance and Odor:CLEAR LIQUID W/SHARP ODOR

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL, ACIDIC, BASIC MATERIALS, METALS, METTLAIC
COMPOUNDS, HYDROGEN GAS
Stability Condition to Avoid:TEMPERATURES >150C.
Hazardous Decomposition Products:DIOXIDE, CO2 & BURNED CARBON PRODUCTS,
FORMALDEHYDE, HYDROGEN GAS

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.