BSNHR - DBU-(031389M) DELTRON BASECOAT
- MSDS: BSNHR
- Manufacturer: PPG INDUSTRIES
- Product Name: DBU-(031389M) DELTRON BASECOAT
- National Stock Number: 8010-00F031404
Product Identification
Product ID:DBU-(031389M) DELTRON BASECOAT
MSDS Date:07/11/1990
FSC:8010
NIIN:00F031404
MSDS Number: BSNHR
Responsible Party
PITTSBURGH, PA 15222-1416
US
Emergency Phone: 304-843-1300
Info Phone: 412-434-3131
Cage: PPGIN
Contractor
Telephone: 304-843-1300
Cage: 93915
Ingredients
8-11
RTECS: 9999999WG
2-(2'-HYDROXY-3',5'-DI-TERT-AMYLPHENYL)BENZOTRIAZOLE;
CAS: 25973-55-1
Fraction By Weight: 5-10%
BUTYL BENZYL PHTHALATE, BBP, BENZYL BUTYL PHTHALATE
CAS: 85-68-7
RTECS: TH9990000
Fraction By Weight: 5-10%
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
PIGMENT
Fraction By Weight: 25-30%
BUTYL ACETATE (N-BUTYL ACETATE)
CAS: 123-86-4
RTECS: AF7350000
Fraction By Weight: 40-45%
OSHA PEL 710 MG/CUM
ACGIH TLV: 713 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 10-15%
OSHA PEL 200 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,
CAS: 108-65-6
RTECS: AI8925000
Fraction By Weight: 10-15%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
XYLENE, DIMETHYLBENZENE, XYLOL
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 5-10%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM, SKIN
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
2-BUTANONE (METHYL ETHYL KETONE) (MEK)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 5-10%
OSHA PEL 200 PPM
ACGIH TLV: 590 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 5-10%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM
ACETONE; DIMETHYL KETONE
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 5-10%
OSHA PEL 2400 MG/CUM
ACGIH TLV: 750 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE *93/3*
CAS: 64742-89-8
Fraction By Weight: 5-10%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES
CAS: 64742-88-7
Fraction By Weight: 5-10%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
SOLVENT NAPHTHA, PETROLEUM, LIGHT AROMATIC, HIGH FLASH
CAS: 64742-95-6
RTECS: WF3400000
Fraction By Weight: 5-10%
FILM FORMERS
Fraction By Weight: <35-40%
RESIN
Fraction By Weight: <35-40%
ADDITIVES
Fraction By Weight: <35-40%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL OR FATAL. EYES:
SEVERE IRRITATION. SKIN: MODERATE IRRITATION. ABSORPTION.
INHALATION: VAPOR & SPRAY MIST MAY BE HARMFUL, EYES & RESPIRATORY
TRACT IRRITATION, MAY CAUSE PERMANENT BRA IN & NERVOUS SYSTEM
DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: EYE WATERING, HEADACHES, NAUSEA,
DIZZINESS, & LOSS OF COORDINATION. EYES: REDNESS, ITCHING, BURNING
SENSATION, & VISUAL DISTURBANCES. SKIN: DRYNESS, ITCHING, CRACKING,
BURNING, REDNESS, & SWELLING.
First Aid
First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH IMMEDIATELY
W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN: REMOVE PROMPTLY BY
WIPING, FOLLOWED BY WATERLESS HAND CLEANER & SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION &
OTHER SUPPORTIVE MEASURES. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:PMCC
Flash Point:72F
Lower Limits:1.3%
Extinguishing Media:CO2, DRY CHEMICAL, UNIVERSAL AQUEOUS FILM FORMING
FOAM
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, BUT USE TO
COOL CLOSED CONTAINERS TO PREVENT PRESSURE
BUILD-UP/AUTOIGNITION/EXPLOSION. FOG NOZZLES ARE PREFERRED. USE
SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. FLAMMABLE LIQUID.
Accidental Release
Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. WEAR
PROTECTION/EVACUATE AREA. REMOVE ALL SOURCES OF IGNITION. TAKE UP
SPILLED MATERIAL W/SAWDUST, VERMICULITE, OR OTHER ABSORBENT
MATERIAL & PLACE INTO CONTAINERS FOR DIS POSAL.
Handling
Handling and Storage Precautions:DON'T STORE >120F. AVOID FREE FALL OF
LIQUIDS IN EXCESS OF A FEW INCHES. CONTAINERS SHOULD BE GROUNDED
WHEN POURING. KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:IF MATERIAL IS PART OF MULTIPLE COMPONENT COATING
SYSTEM, READ MSDS'S FOR OTHER COMPONENTS BEFORE BLENDING AS THE
RESULTING MIXTURE MAY HAVE THE HAZARDS OF ALL OF ITS PARTS. (SEE
SUPP).
Exposure Controls
Respiratory Protection:VAPOR EXHAUST OR FRESH AIR ENTRY. WEAR
NIOSH/MSHA APPROVED FOR PAINT SPRAY OR AIR SUPPLIED RESPIRATOR TO
REDUCE EXPOSURE. RESPIRATOR MUST BE PROPERLY FITTED.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST IN VOLUME & PATTERN TO KEEP
CONCENTRATION OF INGREDIENTS.
Protective Gloves:NITRILE/NEOPRENE RUBBER/PVA
Eye Protection:CHEMICAL-TYPE SPLASH GOGGLES
Other Protective Equipment:FULL FACE SHIELD, IMPERMEABLE APRON
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
INTENTIONAL MISUSE BE DELIBERATELY CONCENTRATING & INHALING THE
CONTENTS CAN BE HARMFUL OR FATAL. PHYSICAL DATA: % SOLID BY
WEIGHT: 40-65.
Chemical Properties
Boiling Pt:B.P. Text:150.8-401F
Vapor Pres:8-19
Vapor Density:>1
Spec Gravity:1-1.3
Evaporation Rate & Reference:(BU AC = 100): 100
Solubility in Water:SLIGHT
Appearance and Odor:VISCOUS LIQUID W/CHARACTERISTIC SOLVENT ODOR
Percent Volatiles by Volume:51-59
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS
Stability Condition to Avoid:ELECTRICAL EQUIPMENT, HOT SURFACES, TEMPS
>120F, & OTHER SOURCES OF IGNITION
Hazardous Decomposition Products:CO
Disposal
Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
W/LOCAL, STATE, & FEDERAL REGULATIONS. EMPTY CONTAINERS SHOULD BE
RECYCLED OR DISPOSED OF THROUGH AN APPROVED WASTE MANAGEMENT
FACILITY. FLAMMABLE LIQU ID. UN1263.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.