BSPMP - 753 SIGNATURE SERIES INT./EXT. ACRYLIC SEMI-GLOSS ENAMEL
- MSDS: BSPMP
- Manufacturer: RICHARD'S PAINT MFG CO INC
- Product Name: 753 SIGNATURE SERIES INT./EXT. ACRYLIC SEMI-GLOSS ENAMEL
- National Stock Number: 8010-00F031965
Product Identification
Product ID:753 SIGNATURE SERIES INT./EXT. ACRYLIC SEMI-GLOSS ENAMEL
MSDS Date:02/07/1992
FSC:8010
NIIN:00F031965
MSDS Number: BSPMP
Responsible Party
ROCKLEDGE, FL 32955
US
Emergency Phone: 407-636-6200
Info Phone: 407-636-6200
Cage: RICH1
Contractor
Telephone: 407-636-6200
Cage: RICH1
Ingredients
1,2-PROPANEDIOL (PROPYLENE GLYCOL)
CAS: 57-55-6
RTECS: TY2000000
Fraction By Weight: 5%
PROPANOIC ACID, 2-METHYL, MONOESTER
CAS: 25265-77-4
RTECS: UF6000000
Fraction By Weight: <5%
0.65 LB/GAL
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION, ABSORPTION,
DEFATTING, DERMATITIS. EYES: SEVERE IRRITATION. INGESTION:
GASTROINTESTINAL IRRITATION. INHALATION: ANESTHESIA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: VOMITING, NAUSEA, DIARRHEA.
INHALATION: DIZZINESS, BREATHING DIFFICULTIES, LOSS OF
COORDINATION. EYES: BLURRED VISION, REDNESS. SKIN: CRACKS, DRYNESS.
First Aid
First Aid:INHALATION: MOVE PERSON TO FRESH AIR. IF BREATHING STOPS
APPLY ARTIFICIAL RESPIRATION. EYES: FLUSH W/LARGE QUANTITIES OF
WATER FOR 15 MINUTES. SKIN: WASH THOROUGHLY W/SOAP/WATER.
INGESTION: DO NOT I NDUCE VOMITING CAN CAUSE PHEUMONITIS &
PULMONARY EDEMA. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:214F
Lower Limits:0.6%
Upper Limits:12.5%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:RESPIRATORY EQUIPMENT SHOULD BE WORN TO AVOID
INHALATION OF CONCENTRATED VAPORS. WATER SHOULD NOT BE USED, EXCEPT
AS A FOG TO KEEP NEARBY CONTAINER COOL.
Unusual Fire/Explosion Hazard:CLOSED CONTAINER MAY EXPLODE WHEN EXPOSED
TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES, PROVIDE GOOG
VENTILATION, DIKE THE SPILL AREA & COVER W/INERT, ABSORBENT
MATERIAL & REMOVE TO A DISPOSAL CONTAINER.
Handling
Handling and Storage Precautions:AVOID HOT METAL SURFACES. USE ONLY IN
WELL VENTILATED AREAS. KEEP CONTAINERS CLOSE WHEN NOT IN USE. KEEP
AWAY FROM EXTREME HEAT & OPEN FLAMES.
Exposure Controls
Respiratory Protection:NIOSH APPROVED CARTRIDGE RESPIRATOR. IN CONFINED
AREAS, USE AIR-SUPPLIED RESPIRATOR OR SCBA.
Ventilation:GENERAL MECHANICAL/LOCAL EXHAUST. EQUIPMENT SHOULD BE
EXPLOSION PROOF.
Protective Gloves:IMPERMEABLE, CHEMICAL
Eye Protection:CHEMICAL SAFETY GLASSES/GOGGLES
Other Protective Equipment:FACE SHIELD, IMPERMEABLE APRONS, HEAD CAPS,
EYE WASH STATIONS, SAFETY SHOWERS
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:360-471F
Vapor Density:>1
Spec Gravity:1.1
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETE
Percent Volatiles by Volume:0.65
Stability
Stability Indicator/Materials to Avoid:YES
ALKALINE, STRONG ACIDS, OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT, POOR VENTILATION,
CORROSIVE ATMOSPHERE, EXCESSIVE AGING, HOT METAL SURFACES, OPEN
FLAMES
Hazardous Decomposition Products:CO2, CO
Disposal
Waste Disposal Methods:CONSULT ALL FEDERAL, STATE & LOCAL HAZARDOUS
WASTE REGULATIONS BEFORE DISPOSING INTO APPROVED HAZARDOUS WASTE
LANDILLS. OBEY ALL RELEVENT LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.