BSQNF - L-12616
- MSDS: BSQNF
- Manufacturer: 3M GENERAL OFFICES
- Product Name: L-12616
- National Stock Number: 6850-00N041109
Product Identification
Product ID:L-12616
MSDS Date:11/01/1991
FSC:6850
NIIN:00N041109
MSDS Number: BSQNF
Responsible Party
ST PAUL, MN 55144-1000
US
Emergency Phone: 612-733-1110
Info Phone: 612-733-1110;612-733-7205
Cage: 1BY21
Contractor
Telephone: 800-364-3577/651-737-6501
Cage: 28112
Ingredients
THROUGH THE POLYMER. GAP IS RPTD TO BE SENSITIVE TO
OSHA PEL 25 PPM
ACGIH TLV: 50 PPM; 200 STEL
AREAS, OR IN BROWN BOTTLES.
AVOIDED. NO SMOKING IN AREA OF USE. DO NOT USE
HEAT &/UV RADIATION MAY CAUSE THE FORMATION OF HCL
GLYCIDYL AZIDE POLYMER (NON-FUNCTIONAL)
Fraction By Weight: 100%
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: <0.1%
OSHA PEL 100 PPM; 150 STEL
ACGIH TLV: 50 PPMS, S
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ETHYLENE, TETRACHLORO-; (PERCHLOROETHYLENE) (SARA III)
CAS: 127-18-4
RTECS: KX3850000
Fraction By Weight: <0.1%
OSHA PEL 25 PPM
ACGIH TLV: 50 PPM; 200 STEL
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
OF THE LAST FEW PERCENT OF DICHLOROETHANE IS
OSHA PEL 25 PPM
ACGIH TLV: 50 PPM; 200 STEL
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN/INHAL: NO TOXICITY DATA.
INGEST: NO TOXICITY DATA. NOT AN EXPECTED ROUTE OF INDUSTRIAL
EXPOS. CHLOROCARBON MATERIALS HAVE PRDCD SENSITIZATION OF
MYOCARDIUM TO EPINEPHRINE IN LAB ANIMALS & CO ULD HAVE A SIMILAR
EFFECT IN HUMANS. ADRENOMIMETICS (E.G., EPINEPHRINE) MAY BE
CONTRA-INDICATED EXCEPT(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: FOR LIFE-SUSTAINING USES IN HUMANS
ACUTELY/CHRONICALLY EXPOS TO CHLOROCARBONS. NOTE:TOLUENE APPEARS ON
NAVY LISTING OF OCCUP CHEM REPROD HAZARDS. SEEK CONSULTATION FROM
APPROP HEALTH P ROFESSIONALS CONCERNING LATEST HAZARD LIST
INFORMATION & SAFE HNDLING & EXPOS INFORMATION .
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR AT LEAST 15
MINS. CALL MD. SKIN: WASH AFFECTED AREA WITH SOAP & WATER FOR AT
LEAST 15 MINS. INHAL: IF SYMPTOMS OCCUR, REMOVE PERSON TO FRESH
AIR. IF SYMPS CONTINUE, CALL MD. INGEST: GIVE TWO GLASSES OF
WATER. IMMEDIATELY CALL MD OR POISON CONTROL CENTER.
Fire Fighting
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM-FOR SMALL AMOUNT.
Fire Fighting Procedures:BURNING IS EXTREMELY RAPID W/VIOLENT EVOLUTION
OF GAS. WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION PRODUCTS MAY
INCLUDE HCL & PHOSGENE .
Accidental Release
Spill Release Procedures:OBSERVE PRECS FROM ALL SECTIONS. EXTING ALL
IGNIT SOURCES. VENT. COLLECT SPILLED MATL. PLACE IN U.S. DOT APPRVD
CNTNR & SEAL. EXPLOSIVE B- IF IGNITED, WILL BURN RAPIDLY RELEASING
LGE AMTS OF GAS. CAUT ION! IF SOLV IS REMOVED FROM GAP SOLNS,(SUPP
DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:WHEN NOT IN USE, CNTNR SHLD BE KEPT
TIGHTLY CLSD/AWAY FROM HEAT/FLAME. AVOID PRLNG/RPTD BRTHG OF CONC
VAPS. USE IN AREA SUFF VENT TO PVNT VAP BUILDUP.
Other Precautions:FOR USE BY QUALIFIED PERS ONLY. CHEM, PHYSICAL &
TOXICOLOGICAL PROPERTIES OF PROD HAVE NOT BEEN FULLY INVESTIGATED &
ITS HNDLG/USE MAY BE HAZ. GENL SAFE PRAC REQS THAT CONT W/SKIN/EYES
& BRTHG OF VAPS , FUMES, MISTS/DUSTS SHLD BE (SUPP DATA)
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED SCBA WHERE LOCAL VENTILATION
IS NOT AVAILABLE.
Ventilation:LOCAL EXHAUST VENTILATION IS RECOMMENDED WHERE MATERIAL
BECOMES AIRBORNE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPILL PROC: PURE MATL WOULD BE CLASS EXPLOS B. BE CERTAIN OF COMPLIANCE
W/ALL APPLIC LAWS & REGS BEFORE REMOVAL OF SOLV. SOLV CAN BE EVAP
FROM GAP SOLNS USING ROTARY EVAP. SUGGESTED CNDTNS ARE WATER A SPIR
VACUUM(10 - 30 MM HG PRESS) W/BATHTEMP OF 70-80C(160-175F). IF EVAP
HAS PROVISION FOR SPARGING, REMOVAL (ING 4)
Chemical Properties
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:NIL
Spec Gravity:1.3 (H*20=1)
Evaporation Rate & Reference:NIL (BUOAC=1)
Solubility in Water:NIL
Appearance and Odor:AMBER LIQUID, LITTLE ODOR.
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:NO
NOT KNOWN.
Stability Condition to Avoid:DO NOT HEAT OVER 100C.
Hazardous Decomposition Products:NITROGEN COMPOUNDS. HCL, PHOSGENE .
Disposal
Waste Disposal Methods:TO REDUCE RISK OF EXPLO EVOL OF GAS WHEN BURNING
MATL, DILUTE W/AT LEAST 3 PARTS OF SOLV, SUCH AS ACETONE, TO 1 PART
PROD. SEE ENVIRON DATA SECTION. MIX W/FLAMM MATL & INCIN IN
PERMITTED HAZ WASTE INC IN. CONSULT LOCAL, STATE & FED REGS &
AUTHORITIES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.