BSQYW - HOSE ASSEMBLY LUBRICANT
- MSDS: BSQYW
- Manufacturer: SCOT LABORATORIES
- Product Name: HOSE ASSEMBLY LUBRICANT
- National Stock Number: 9150-00N041870
Product Identification
Product ID:HOSE ASSEMBLY LUBRICANT
MSDS Date:07/26/1992
FSC:9150
NIIN:00N041870
MSDS Number: BSQYW
Responsible Party
CHAGRIN FALLS, OH 44022
US
Emergency Phone: 216-543-3033
Info Phone: 216-543-3033
Cage: SCTLA
Contractor
Telephone: 216-543-3033
Cage: SCTLA
Ingredients
PETROLEUM DISTILLATES
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN CONTACT: PROLONGED CONTACT MAY
CAUSE DERMATITUS. EYE CONTACT: POSSIBLE IRRITANT. INGESTION:
HARMFUL IF SWALLOWED. NAUSEA, DIARRHEA.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:RESPIRATORY CONDITIONS.
First Aid
First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MIN. IF IRRIT PERSISTS
CONSULT MD IMMEDIATELY. SKIN: WASH W/SOAP & WATER. CHANGE SOAKED
CLOTHING. INGEST: DO NOT INDUCE VOMITING. CONTAINS PETROLEUM
DISTILLATES. CO NSULT MD. INHAL: REMOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) .
Fire Fighting
Flash Point Method:COC
Flash Point:>405F,>207C
Extinguishing Media:TREAT AS CLASS B FIRE. USE CARBON DIOXIDE, FOAM OR
POWDER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DO NOT USE ON HOT SURFACES & NEAR SOURCES
OF IGNITION SUCH AS FIRE, SPARKS, OR WELDING EQUIPMENT.
Accidental Release
Spill Release Procedures:MOP UP, WET VACUUM OR USE ABSORBANT MATERIAL
(SAND, EARTH, CLAY, OR SAWDUST). RINSE AREA W/WATER & DETERGENT TO
COMPLETELY REMOVE PRODUCT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:HANDLE IN VENTILATED AREA. DO NOT
STORE NEAR OPEN FIRE OR DIRECT HEAT. VENT LARGE TANKS TO OUTSIDE.
Other Precautions:NONE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NONE NORMALLY REQUIRED.
Ventilation:LOCAL EXHAUST: NORMALLY ADEQ. MECH (GEN): IF TLV'S ARE
EXCEEDED USE MECH VENT OF MIN VEL OF 60 FPM.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APRV CHEMICAL WORKERS GOGGLES (FP N
Other Protective Equipment:NONE NEEDED FOR NORMAL USE.
Work Hygienic Practices:FOLLOW GOOD MANUFACTURING & HOUSEKEEPING
PRACTICES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:>578F,>303C
Vapor Pres:NEGLIGIBLE
Vapor Density:>1
Spec Gravity:0.8900 (H*2O=1)
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR AMBER LIQUID; PETROLEUM ODOR
Stability
Stability Indicator/Materials to Avoid:YES
DO NOT MIX W/OTHER MATERIAL. FOLLOW DIRECTIONS ON LABEL.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:UNKNOWN.
Disposal
Waste Disposal Methods:DISPOSE OF SMALL AMTS IN WASTE OIL SYSTEM.
INCINERATE OR TRANSFER TO REFINERY. DISPOSE OF LARGE AMOUNTS
ACCORDING TO FEDERAL, STATE, AND LOCAL REGULATIONS. CONSULT
APPROPRIATE OFFICIALS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.