BSRWQ - THINNER, DOPE & LACQUER (CELLULOSE NITRATE)
- MSDS: BSRWQ
- Manufacturer: HOME OIL CO
- Product Name: THINNER, DOPE & LACQUER (CELLULOSE NITRATE)
- National Stock Number: 8010-00-160-5788
Product Identification
Product ID:THINNER, DOPE & LACQUER (CELLULOSE NITRATE)
MSDS Date:02/14/1992
FSC:8010
NIIN:00-160-5788
MSDS Number: BSRWQ
Responsible Party
WICHITA, KS 67201
US
Emergency Phone: 316-838-4663/800-633-8253 (PERS)
Info Phone: 316-838-4663
Preparer: BERNARD D HOFFMAN, JR
Cage: 0A9L8
Contractor
Telephone: 316-838-4663
Cage: 0A9L8
Ingredients
N-BUTYL ACETATE
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 30%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)16
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 16%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
METHYL ETHYL KETONE (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 12%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
N-BUTYL ALCOHOL
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 10%
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL CYCLOHEXANE
CAS: 108-87-2
RTECS: GV6125000
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM
N-HEPTANE
CAS: 142-82-5
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:BREATHING VAPORS OR MISTS MAY BE
HARMFUL. EFFECTS OF OVEREXPOSURE INCLUDE IRRITATION OF THE NOSE,
THROAT, HEADACHES, DIZZINESS, LOSS OF COORDINATION, BLOOD NOSE AND
LUNG DAMAGE.
First Aid
First Aid:MOVE VICTIM AWAY FROM EXPOSURE AND INTO FRESH AIR. SEEK
IMMEDIATE MEDICAL ATTENTION IF RESPIRATORY SYMPTOMS DEVELOP. IF
SWALLOWED, SEEK EMERGENCY MEDICAL ATTENTION. SKIN CONTACT: WASH
AFFECTED AREA WI TH SOAP AND WATER. EYE CONTACT: FLUSH IMMEDIATELY
WITH CLEAR WATER. SEE IMMEDIATE MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:TCC
Flash Point:24.0F,-4.4C
Lower Limits:1
Upper Limits:12
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, OR CHEMICAL FOAM
Fire Fighting Procedures:THIS MATERIAL IS EXTREMELY FLAMMABLE. USE
RESPIRATORY PROTECTION. KEEP PRODUCT AWAY FROM ALL SOURCES OF
IGNITION.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR AND MAY
ACCUMULATE IN LOW AREAS.
Accidental Release
Spill Release Procedures:KEEP ALL SOURCES OF IGNITION AWAY FROM SPILL.
STAY UPWIND FROM SPILL. USE RESPIRATORY EQUIPMENT AS CONDITIONS
WARRANT. SPILL MAY BE ABSORBED INTO AN APPROPRIATE ABSORBING
MATERIAL. REPORTABLE QUANTITY : 10,000 LBS.
Handling
Handling and Storage Precautions:EMPTY CONTAINERS RETAIN RESIDUE & MAY
BE HAZARDOUS. KEEP CONTAINERS CLOSED. STORE IN A COOL, DRY, WELL
VENTILATED AREA AWAY FROM IGNITION FORMS.
Other Precautions:VAPORS ARE HEAVIER THAN AIR AND MAY ACCUMULATE IN LOW
AREAS. VAPORS MAY TRAVEL CONSIDERABLE DISTANCES.
Exposure Controls
Respiratory Protection:CHEMICAL CARTRIDGES ARE NOT RECOMMENDED. IF
CONCENTRATIONS EXCEED LIMITS, USE SUPPLIED AIR RESPRIATOR.
Ventilation:USE VENT TO MAINTAIN LOW CONCENTRATIONS. WHERE EXPLOSIVE
MIXTURES PRESENT, USE ELECTRICAL SYSTEM SAFE FOR SUCH LOCATIONS
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:IMPERMEABLE CLOTHING TO AVOID SKIN CONTACT
IS ADVISED.
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:175 TO 259F
Vapor Pres:35.9
Vapor Density:3.2
Spec Gravity:0.825 (WATER=1)
Evaporation Rate & Reference:2.1 (BU AC=1)
Solubility in Water:18.4%
Appearance and Odor:CLEAR, LITTLE IF ANY COLOR; CHARACTERISTIC ODOR
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR BASES, ALKALI METALS, ALUMINUM, HALOGENS, ANHYDRIDES,
ALDEHYDES, OXIDIZING AGENTS, REDUCING AGENTS.
Stability Condition to Avoid:AVOID ALL POSSIBLE SOURCES OF IGNITION.
Hazardous Decomposition Products:COMBUSTION MAY YIELD CARBON DIOXDIE
AND CARBON MONOXIDE.
Disposal
Waste Disposal Methods:KEEP CONTAINERS TIGHTLY CLOSED. BOND AND GROUND
ALL EQUIPMENT WHEN TRANSFERRING FROM ONE VESSEL TO ANOTHER. DISPOSE
OF PRODUCT IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL
REGULATIONS.
======================================================================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.