BSSGW - LEAD ACID BATTERY

  • MSDS: BSSGW
  • Manufacturer: EXIDE CORP
  • Product Name: LEAD ACID BATTERY
  • National Stock Number: 6140-00-057-2554
Product Identification

Product ID:LEAD ACID BATTERY
MSDS Date:05/01/1991
FSC:6140
NIIN:00-057-2554
MSDS Number: BSSGW

Responsible Party
EXIDE CORP
645 PENN STREET
READING, PA 19612-4205
US

Emergency Phone: 215-378-0798

Info Phone: 215-378-0798

Cage: 20038

Contractor
EXIDE CORP
14205 READING, PA 19612-4205 US

Telephone: 610-378-0500/0798

Cage: 20038

Ingredients

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 60%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 2%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ARSENIC (SARA III)

CAS: 7440-38-2

RTECS: CG0525000

Fraction By Weight: 0.2%

OSHA PEL 0.01 MG/M3 (AS)

ACGIH TLV: 0.2 MG/M3; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


CALCIUM, METAL

CAS: 7440-70-2

RTECS: EV8040000

Fraction By Weight: 0.2%


TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 0.2%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9293


SULFURIC ACID (SARA III) ELECTROLYTE OF BATTERY

CAS: 7664-93-9

RTECS: WS5600000

Fraction By Weight: 10-30%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


POLYPROPYLENE CASE MATERIAL

CAS: 9003-07-0

Fraction By Weight: N/K <5%


POLYSTYRENE RESIN CASE MATERIAL

CAS: 9003-53-6

Fraction By Weight: N/K <5%


STYRENE ACRYLONITRILE COPOLYMER CASE MATERIAL

CAS: 9003-54-7

RTECS: AT6978000

Fraction By Weight: N/K <5%


STYRENE BUTADIENE CASE MATERIAL

CAS: 9003-55-8

RTECS: WL6478000

Fraction By Weight: N/K <5%


ACRYLONITRILE BUTADIENE STYRENE CASE MATERIAL

CAS: 9003-56-9

RTECS: AT6970000

Fraction By Weight: N/K <5%


POLYVINYL CHLORIDE RESIN CASE MATERIAL

CAS: 9002-86-2

Fraction By Weight: N/K <5%


POLYCARBONATE CASE MATERIAL

CAS: 24936-68-3

Fraction By Weight: N/K <5%


HARD RUBBER CASE MATERIAL

Fraction By Weight: N/K <10%


SILICA, CRYSTALLINE - FUSED GEL CELL BATTERIES ONLY

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: 10%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:SULFURIC ACID IS HARMFUL BY ALL ROUTES
OF ENTRY. (SKIN)-SEVERE IRRITATION, BURNS AND ULCERATION.
(EYE)-SEVERE IRRITATION, BURNS, CORNEA DAMAGE, BLINDNESS
(INHALATION)-SEVERE RESPIRATORY IRRITATION. ( INGESTION)-SEVERE
IRRITATION OF MOUTH THROAT, ESOPHAGUS AND STOMACH.
Explanation of Carcinogenicity:LEAD IS LISTED AS A 2B CARCINOGEN ACGIH.
NTP,IARC,OSHA LISTARSENIC AS A CARCINOGEN.
Effects of Overexposure:SULFURIC ACID-POSSIBLE EROSION OF TOOTH ENAMEL,
INFLAMMATION OF NOSE, THROAT AND BRONCHIAL TUBES. LEAD-ANEMIA,
NEUROPATHY, PARTICULARLY OF THE MOTOR NERVES, W/WRISP DROP, KIDNEY
DAMMAGE, REPRODUCTIVE CHANGES IN BOTH MALES & FEMALES.
Medical Cond Aggravated by Exposure:SULFURIC ACID MIST MAY CAUSE LUNG
DAMAGE AND AGGRAVATE PULMONARY CONDITIONS, AGGRAVATE SKIN DISEASES
(ECZMA,DERMATITIS). LEAD CAN AGGRAVATE FORMS OF KIDNEY,LIVER
NEUROLOGIC DISEASES.

First Aid

First Aid:(INHALATION)-REMOVE TO FRESH AIR IMMEDIATELY GET MEDICAL
ATTENTION. [PB WASH NOSE LIPS, GARGLE CONSULT PHYSICIAN]
(SKIN)-REMOVE CONTAMINATED CLOTHING AND FLUSH WITH H20 FOR AT LEAST
15 MIN. (EYE)-FLU SH IMMEDIATELY W/H20FOR AT LEAST 15 MIN. CONSULT
PHYSICIAN. (INGESTION)-GIVE LARGE QUANTITIES OF WATER; [ DO NOT ]
INDUCE VOMITING CONSULT PHYSICIAN.

Fire Fighting

Lower Limits:4.1% H2 GAS
Upper Limits:74.2%
Extinguishing Media:CARBON DIOXIDE CO2, FOAM, DRY CHEMICAL, HALOGEN
Fire Fighting Procedures:IF BATTERIES ARE ON CHARGE, SHUT OFF POWER,
USE POS-PRESSURE SCBA. H2O APPLIED TO ELECTROLYTE GENERATES HEAT &
CAUSES IT TO SPATTER WEAR ACID RESISTANT CLOTHES
Unusual Fire/Explosion Hazard:HIGHLY FLAMMABLE HYDROGEN GAS IS
GENERATED DURING CHARGING AND OPERATION. KEEP SOURCES OF IGNITION
AWAY FROM BATT.

Accidental Release

Spill Release Procedures:STOP FLOW OF MATERIAL, CONTAIN/ABSORB SMALL
SPILLS W/DRY SAND,EARTH VERMICULITE. USE SODA ASH, SODIUM
BICARBONATE, LIMEETC TO NEUTRALIZE ACID.
Neutralizing Agent:SODA ASH, SODIUM BICARBONATE, LIME

Handling

Handling and Storage Precautions:COOL, DRY, WELL VENT AREA W/IMPERVIOUS
SURFACES. ADEQUATE H20 AND SPILL CONTROL. KEEP AWAY FROM FIRE
SPARKS AND HEAT.
Other Precautions:USE PPE WHEN HANDLING BATTERIES. HANDLE BATTERIES
CAUTIOUSLY TO AVOID SPILLS. MAKE CERTAIN VENT CAPS ARE ON SECURELY.
AVOID CONTACT WITH INTERNAL COMPONENTS.

Exposure Controls

Respiratory Protection:NONE REQUIRED UNDER NORMAL CONDITIONS. WHEN
CONCENTRATIONS OF SULFURIC ACID MISTS ARE KNOWN TO EXCEED PEL, USE
NIOSH/MSHA APPROVED RESPIRATORY PROTECTION.
Ventilation:STORE AND HANDLE IN WELL-VENT AREA. IF MECHANICAL
VENTILATION IS USED COMPONENTS MUST BE ACID-RESISTENT.
Protective Gloves:RUBBER/PLASTIC GLOVES SEE SUPP SAFE&HEAL
Eye Protection:CHEMICAL SAFETY GOGGLES W/FACE SHIELD
Other Protective Equipment:ACID RESISTANT APRON. UNDER SEVERE EXPOSURE
OR EMERGENCY CONDITIONS WEAR ACID CLOTHING AND BOOTS
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
WHERE SULFURIC ACID IS HANDLED IN CONCENTRATIONS GREATER THAN 1%
EMERGENCY EYEWASH STATIONS AND SHOWERS SHOULD BE PROVIDED, WITH
UNLIMITED WATER SUPPLY. PROTECTIVE GLOVES SHOULD BE RUBBER/PLASTIC
ACID RESISTANT GLOVES ELBOW LENGTH. INGREDIENTS 7-14 ARE FOR THE
CASE OF THE BATTERY.

Chemical Properties

Boiling Pt:B.P. Text:203F,95C
Vapor Pres:10 MM HG
Vapor Density:>1
Spec Gravity:1.230-1.350
Evaporation Rate & Reference:<1
Solubility in Water:YES 100%
Appearance and Odor:ELECTROLYTE IS A CLEAR LIQUID WITH SHARP
PENTRATING, PUNGENT ODOR

Stability

Stability Indicator/Materials to Avoid:YES
SULFURIC ACID,COMBUSTIBLES,ORGANIC MATERIALS,REDUCING
AGENTS,METALS,SULFUR TRIOXIDE GAS,STRONG OXIDIZERS,H20,HALIDES
Stability Condition to Avoid:PROLONGED OVERCHARGE, SOURCES OF IGNITION.
Hazardous Decomposition Products:SULFUR DIOXIDE/TRIXOIDE,CARBON
MONOXIDE,FLAMMABLE HYDROGEN GAS,LEAD FUME,TOXIC ARSINE GAS.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH ALL
APPLICABLE LOCAL, STATE AND FEDERAL REGULATIONS. COORDINATE WITH
SUPPORTING INSTALLATION AND/OR MACOM ENVIRONMENTAL OFFICE PRIOR TO
DISPOSAL

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.