BSSVL - RADIO SHACK PLASTIC-PATCH LIQUID, 64-2304 LIQUID

  • MSDS: BSSVL
  • Manufacturer: TECH SPRAY
  • Product Name: RADIO SHACK PLASTIC-PATCH LIQUID, 64-2304 LIQUID
  • National Stock Number: 8030-00N041631
Product Identification

Product ID:RADIO SHACK PLASTIC-PATCH LIQUID, 64-2304 LIQUID
MSDS Date:01/04/1993
FSC:8030
NIIN:00N041631
MSDS Number: BSSVL

Responsible Party
TECH SPRAY
AMARILLO, TX 79105
US

Emergency Phone: 806-372-8523

Info Phone: 806-372-8523

Cage: DO989

Contractor
TECH SPRAY INC
949 AMARILLO, TX 79105-0949 US

Telephone: 806-372-8523

Cage: 54700

Ingredients

METHACRYLIC ACID, METHYL ESTER; (METHYL METHACRYLATE)

CAS: 80-62-6

RTECS: OZ5075000

Fraction By Weight: >99%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


P-TOLUIDINE, N, N- DIMETHYL-; (DIMETHYL-P-TOLUIDINE)

CAS: 99-97-8

RTECS: XU5803000

Fraction By Weight: <1%


HYDROQUINIDINE

CAS: 1435-55-8

RTECS: MX3016000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:MODERATELY TOXIC BY INHAL. VAPS
MAY CAUSE HDCH, NAUS, DIZZ, VOM & POSS UNCON. DIRECT INHAL OF VERY
CONCENTRATED VAPS FOR THE PURPOSE OF OBTAINING A EUPHORIC OR "HIGH"
STATE CAN CAUSE UNCON & EVE N DEATH. EYES:CONTACT CAN CAUSE SEV
IRRIT & POSS CORNEAL DAM. SKIN:RPTD/RPLNGD CONT CAN CAUSE IRRIT &
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:POSSIBLE RASHES W/DEFATTING.
INGEST:RESPIRATORY DISTRESS, NAUSEA, VOMITING, MODERATE TO SEVERE
MUCOSAL IRRITATION & POSSIBLE UNCONSCIOUSNESS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:MOVE TO FRESH AIR. ADMIN OXYGEN IF BREATHING IS
DIFFICULT. IF NOT BREATHING, GIVE ARTF RESP. SEEK MED ATTN.
EYES:FLUSH W/WATER FOR AT LEAST 15 MINS. CALL MD IMMEDIATELY.
SKIN:WASH INFECTED AREA W/SOAP & WATER. REMOVE ANY
CONTAMINATEDCLOTHING. INGEST:INDUCE VOMITING W/TWO GLASSES OF TEPID
SALT WATER & FINGER DOWN THROAT. SEEK IMMEDIATE MED ATTN.

Fire Fighting

Flash Point Method:TCC
Flash Point:50.0F,10.0C
Lower Limits:2.1%
Upper Limits:12%
Extinguishing Media:CHEMICAL FOAM, CARBON DIOXIDE, DRY CHEMICAL OR
HALON.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . USE WATER SPRAY TO COOL CONTAINER & FIGHT
FIRE FROM PROTECTED LOCATION.
Unusual Fire/Explosion Hazard:VAPORS MAY TRAVEL TO SOURCE OF IGNITION &
FLASH BACK.

Accidental Release

Spill Release Procedures:EVAC AREA & ELIM ALL POSS IGNIT SOURCES. WEAR
PROPER NIOSH/MSHA RESP PROT DEVICES & PROT CLTHG. DIKE UP AREA &
ABSORB ON INERT MATL. PLACE IN SEALED CONTRS FOR DISP. FOR LGE
SPILL INDOORS, SHUT OF HEA TING & COOLING SYS TO PVNT VAPS FROM
(SUP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL AREA W/ADEQUATE
VENTILATION. DO NOT STORE IN SUNLIGHT. THIS PRODUCT FOR INDUSTRIAL
USE ONLY.
Other Precautions:KEEP THIS & ALL CHEMICALS AWAY FROM CHILDREN.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED SCBA OR NIOSH/MSHA APPROVED
VAPOR MASK ABOVE TLV.
Ventilation:LAB TYPE FUME HOOD 340 CFM EXHAUST RATE, FACE VELOCITY
100'M.
Protective Gloves:BUNA-N OR SIMILAR GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPILL PROC:SPREADING TO REST OF BUILDING.

Chemical Properties

Boiling Pt:B.P. Text:213F,101C
Vapor Density:3.5
Spec Gravity:0.94
Solubility in Water:1.6
Appearance and Odor:CLEAR, PALE YELLOW LIQUD W/ACRID, FRUITY ODOR.
Percent Volatiles by Volume:>99

Stability

Stability Indicator/Materials to Avoid:NO
REDUCING & OXIDIZING AGENTS. UV LIGHT CAN CAUSE MATERIAL TO POLYMERIZE.
Stability Condition to Avoid:HEAT & IGNITION SOURCES.
Hazardous Decomposition Products:NONE UNDER NORMAL CONDITIONS. IF
BURNED, CARBON OXIDES ARE RELEASED.
Conditions to Avoid Polymerization:TEMPERATURES ABOVE 40C. REACTENTS.

Disposal

Waste Disposal Methods:DO NOT ALLOW TO DRAIN TO SEWER OR OTHER BODIES
OF WATER. INCINERATE LIQUID IN PROPER EQUIPMENT OR CONSIGN TO
RECLAIMER. LANDFILL ABSORBED MATERIAL IN ACCORDANCE TO REGULATION.
CONSULT LOCAL, STATE & F EDERAL REGULATIONS CONCERNING DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.