BSTPD - BUTYLGRIP SEALANT
- MSDS: BSTPD
- Manufacturer: BIDDLE CO
- Product Name: BUTYLGRIP SEALANT
- National Stock Number: 8030-00N047838
Product Identification
Product ID:BUTYLGRIP SEALANT
MSDS Date:11/01/1991
FSC:8030
NIIN:00N047838
MSDS Number: BSTPD
Responsible Party
ST LOUIS, MO 63144
US
Emergency Phone: 314-962-9350
Info Phone: 314-962-9350
Cage: 88448
Contractor
Telephone: 314-962-9350
Cage: 88448
Ingredients
SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MINERAL
CAS: 64742-88-7
Fraction By Weight: <20%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SYMPTOMS OF OVEREXPOSURE INCLUDE
DIZZINESS, INTOXICATION W/EUPHORIA LEADING TO UNCONSCIOUSNESS.
SOLVENT PORTION, LIKE ALL PETROLEUM DISTILLATES, ARE CENTRAL
NERVOUS SYSTEM DEPRESSANTS. NOSE & THROAT I RRITATION MAY OCCUR
FROM INHALATION. PROLONGED OR REPEATED SKIN CONTACT WILL CAUSE
DEFATTING & (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:DERMATITIS. EYE CONTACT W/LIQUID CAN
CAUSE CONJUNCTIVITIS.
Medical Cond Aggravated by Exposure:UNKNOWN.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. RESTORE BRTHG. TREAT
SYMPTOMATICALLY. CONSULT MD. EYES:FLUSH IMMED W/LG AMTS OF WATER
FOR AT LST 15 MINS. TAKE TO MD FOR MEDICAL TREATMENT. SKIN:WASH
AFFECTED AREA W/SOAP & WATER. REMOVE CONTAMINATED CLOTHING.
CONSULT MD IF IRRITATION PERSISTS. INGEST:DRINK 1-2 GLASSES OF
WATER TO DILUTE. DO NOT INDUCE VOMIT. CONSULT MD/POIS CTL CTR
IMMED. TREAT SYMPTOMATICALLY.
Fire Fighting
Flash Point Method:TCC
Flash Point:104F,40C
Lower Limits:1.1%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
IF WATER IS USED, FOG NOZZ ARE PREF. WATER MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP &(SUPDAT)
Unusual Fire/Explosion Hazard:ISOLATE CONTAINERS FROM HEAT, SPARKS,
ELECTRICAL EQUIPMENT & OPEN FLAME. CLOSED CONTAINERS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:SCOOP OR SHOVEL MATL INTO APPROPRIATE
CONTAINER W/NON SPARKING TOOLS. REMOVE SPARK SOURCES, FLAMES & HOT
SURFACES FROM SURROUNDING AREA. PROVIDE ADEQUATE VENT TO MAINTAIN
CONTAMINATE CONCENTRATIONS BE LOW THEIR TLV'S.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE NORMALLY REQUIRED. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:SUFFICIENT VENT SHOULD BE PROVIDED TO KEEP AIR CONTAM CONC
BELOW APPLIC OSHA PELS/TLV LIM. HEAVY SOLV VAPS (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES OF NEOPRENE, (SUPDAT)
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:EYE BATH IF SPLASHING MAY OCCUR.
Work Hygienic Practices:OBSERVE NORMAL INDUSTRIAL HYGIENIC PRACTICES
SUCH AS WASHING OF HANDS BEFORE EATING, USING THE RESTROOM OR
SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:POSS AUTO-IGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT.
VENT:SHOULD BE REMOVED FROM LOWER LEVELS OF THE AREA. PROT
GLOVES:RUBBER OR PARACRIL/PVC ARE RECOMMENDED.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:>305F,>152C
Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:1.39
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:29
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE FUMES WHEN HEATED TO
DECOMPOSITION, AS IN WELDING. FUMES MAY CONTAIN CO, CO*2 & NO*X.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL
REGULATIONS. BEFORE ATTEMPTING CLEAN UP REFER TO HAZARD CAUTION
INFORMATION IN OTHER SECTIONS OF THIS MSDS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.